Lios Nudin
BIOS-Overclocker(in)
Bei overclockers.co.uk gibt es Ergebnisse zur Fury X.
Eine Spannungserhöhung ist nicht möglich und sie wird beim OC dadurch eingeschränkt.
Die Kühlung der Karte scheint sehr gut zu sein.
Eine Spannungserhöhung ist nicht möglich und sie wird beim OC dadurch eingeschränkt.
Die Kühlung der Karte scheint sehr gut zu sein.
Cooler is superb, normal gaming around 35c load, sub 40 benchmarking and very quiet.
Spot on. Right now you can get upto 10% more from clocking I'd say. Add in voltage control that could easily become 20% or more. Drivers a further 10% with ease I suspect and the Fury could well strike down upon NVIDIA with furious anger.
Of course I know it, but I can only share the results I get with the card given. I do believe however AMD are right, overclocking the HBM is simply not required as there is more than enough bandwidth.
I would like to hit 1200-1300MHz core with some voltage though as performance then could be very interesting.
Hi there, I did a test last night, I closed up my case but left the radiator just in the bottom of the case exhausting its heat inside the case, this is a really bad idea by the way, but I wanted to see how hot the card would get. After running Heaven 4.0 all night, the maximum temperature was 58c and the fan speed never exceeded 16%, starting point percentage for the fan is 15%, so it was quieter than the case fans and I was able to sleep with no issues at all. Here is a picture, its in a Corsair case with the smoked side panels, so its not easiest to see and ignore the SSD's just randomly hanging in the bottom of case:
I am not going to report my overclocks without voltage yet as stating Mhz will probably get my hands slapped. But mine is not doing 1200MHz on stock voltage.
At 100% fan it is a strong whooshing noise but at 100% fan the under-load temperatures never exceed 10c above ambient and normally a lot less. So if say your case temp is around 26c, with 100% fan you will be under 35c loaded. But 100% fan is not really required on this kind of cooler, optimal fan speed for this cooler is around 40-50% which is audible but not crazy loud, I find the fan becomes audible over case fans at 25-30% but the fan never really needs to exceed 15% for regular gaming at stock which is as quiet as graphics cards get.
Pointless though, there is still a pump which won't be silent/noiseless, so would be a pretty pointless modification because the fan at 15% is hardly audible.
No idea as software cannot recognise the VRM, so no idea unfortunately.