Rumpelkammer: PCGH Folding@Home-Thread II

ZobRombie · 8. Februar 2018

JayTea schrieb:
Gibt auch so noch keine Plattform, die solche Steckplätze hat, oder? Nur die abgesegnete Spezifikation an sich.

POWER9 Systeme verfügen über PCIe 4.0 und sind auch erhältlich. Für GPUs, zumindest von Nvidia, wird da jedoch NVLINK (2.0) eingesetzt - wie etwa bei der Volta Tesla V100. Die theoretische Geschwindigkeit mit NVLINK 2.0 ist mit 25 GT/s pro Link auch etwas höher als PCIe 4.0 mit 16 GT/s oder PCIe 3.0 mit 8 GT/s. Was dann grob 150 GByte/s Bandbreite bei NVLINK 2.0 (6 Links) gegen 32 GByte/s bei PCIe 4.0 x16 oder 16 GByte/s bei PCIe 3.0 x16 entspricht.

JayTea · 8. Februar 2018

foldinghomealone schrieb:
FAH muss endlich den FAHcore_22 veröffentlichen, dann dürfte der Bottleneck Busanbindung bei NVs eh wegfallen.

Wo gibts dazu Infos?

foldinghomealone schrieb:
Problem natürlich nicht. Aber, wenn man sieht, dass die 9xxx WUs eine 1080 Ti nur zu gut 80% auslasten, was mutmaßlich auf die PCIe Kommunikation zurückzuführen ist, ist das schon eine enorme Vergeudung an Potential.

Aber dann gäbe es doch schon einen Unterschied bei PCIe 3.0 x8 und x16 bei diesen WU? Da wäre die Performance dann ja noch schlechter. Aber laut deinen Versuchen, gibts dort keinen Unterschied. Oder waren diese schlecht auslastenden WU nicht in der Versuchsreihe?
Man könnte gucken, wie hoch die Bus-Auslastung bei PCIe 3.0 x8 mit einer 1080Ti ist, dann hätte man einen guten Anhaltspunkt.......

XeT · 8. Februar 2018

Chris-W201-Fan schrieb:
das Könnte aber auch ein CPU-Limit sein, oder ein Thema, dass eben eher der Takt der Schnittstelle ein Problem ergibt, dazu müsste man es sehr genau testen.
Die Bandbreite wird durch 4.0 zwar erhöht, ob Latenzen und Laufzeiten einzelner Datenpakete besser werden ist aber nicht gesagt.

Der Flaschenhals ist meiner Meinung nach nicht die Bandbreite bei 3.0 16x, sondern eher das Thema Latenzen. Außerdem ist evtl. auch eine interne Abhängigkeit von Daten vorhanden, so dann eine Parallelisierung eben nicht beliebig weit geht, was dazu führt, das die enormen Parallelisierungspotenziale der GPUs irgendwo nicht mehr genutzt werden können.
Das müsste man über zwei GPU-Clienten auf einer GPU aber eigentlich auch in den griff bekommen können.
geht das?

Es müsste eigentlich etwas einheitliches sein. Bei gleicher Auslastung in verschiedene System bei gleicher GPU.

Chris-W201-Fan · 8. Februar 2018

Das würde für eine mangelnde Nutzbarkeit der Gesammtleistung der GPU sprechen, sei es weil es nicht weiter Parallelisierbar ist, weil bestimmte Teile der GPU hier begrenzen, ohne das die Anzeige das zeigen kann, , ...

CrashStyle · 8. Februar 2018

Mit DDU Treiber deinstalliert und 372.70 im abgesicherten modus installiert. Nach einem neustart weiter folden lassen! Da aber die PPD im Vergleich zum 390.77 (290k) 372.70 (260k), Stoppte ich alles und machte nochmal einen neustart. Jetzt kommt nur noch Failed auf der GPU und das steht im LOG!

War es ein Fehler die WU nicht habe fertig rechnen lassen vor dem Treiber wechsel!?

HILFE!

*********************** Log Started 2018-02-08T13:36:24Z ***********************
13:36:41:FS01:Unpaused
13:36:41:WU01:FS01:Connecting to 171.67.108.45:80
13:36:42:WU01:FS01:Assigned to work server 171.67.108.157
13:36:42:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
13:36:42:WU01:FS01:Connecting to 171.67.108.157:8080
13:36:44:WU01:FS01

ownloading 5.13MiB
13:36:44:WU01:FS01

ownload complete
13:36:45:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9414 run:2406 clone:1 gen:276 core:0x21 unit:0x00000152ab436c9d585e06a22a31b85c
13:36:45:WU01:FS01:Starting
13:36:45:WU01:FS01:Running FahCore: D:\Folding\FAHClient/FAHCoreWrapper.exe D:/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 704 -lifeline 1624 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
13:36:45:WU01:FS01:Started FahCore on PID 1360
13:36:45:WU01:FS01:Core PID:10176
13:36:45:WU01:FS01:FahCore 0x21 started
13:36:45:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
13:36:45:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9414 run:2406 clone:1 gen:276 core:0x21 unit:0x00000152ab436c9d585e06a22a31b85c
13:36:45:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
13:36:45:WU01:FS01:Connecting to 171.67.108.157:8080
13:36:46:WU02:FS01:Connecting to 171.67.108.45:80
13:36:46:WU01:FS01:Upload complete
13:36:46:WU01:FS01:Server responded WORK_ACK (400)
13:36:46:WU01:FS01:Cleaning up
13:36:47:WU02:FS01:Assigned to work server 171.67.108.157
13:36:47:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
13:36:47:WU02:FS01:Connecting to 171.67.108.157:8080
13:36:49:WU02:FS01

ownloading 5.16MiB
13:36:49:WU02:FS01

ownload complete
13:36:50:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9415 run:499 clone:2 gen:337 core:0x21 unit:0x00000195ab436c9d585e06cc6b588b19
13:36:50:WU02:FS01:Starting
13:36:50:WU02:FS01:Running FahCore: D:\Folding\FAHClient/FAHCoreWrapper.exe D:/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 02 -suffix 01 -version 704 -lifeline 1624 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
13:36:50:WU02:FS01:Started FahCore on PID 8548
13:36:50:WU02:FS01:Core PID:964
13:36:50:WU02:FS01:FahCore 0x21 started
13:36:50:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
13:36:50:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9415 run:499 clone:2 gen:337 core:0x21 unit:0x00000195ab436c9d585e06cc6b588b19
13:36:50:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
13:36:50:WU02:FS01:Connecting to 171.67.108.157:8080
13:36:51:WU01:FS01:Connecting to 171.67.108.45:80
13:36:51:WU02:FS01:Upload complete
13:36:51:WU02:FS01:Server responded WORK_ACK (400)
13:36:51:WU02:FS01:Cleaning up
13:36:52:WU01:FS01:Assigned to work server 171.67.108.157
13:36:52:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
13:36:52:WU01:FS01:Connecting to 171.67.108.157:8080
13:36:54:WU01:FS01

ownloading 5.17MiB
13:36:54:WU01:FS01

ownload complete
13:36:55:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9415 run:2200 clone:4 gen:59 core:0x21 unit:0x00000043ab436c9d585e06dd1872898d
13:36:55:WU01:FS01:Starting
13:36:55:WU01:FS01:Running FahCore: D:\Folding\FAHClient/FAHCoreWrapper.exe D:/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 704 -lifeline 1624 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
13:36:55:WU01:FS01:Started FahCore on PID 1812
13:36:55:WU01:FS01:Core PID:8048
13:36:55:WU01:FS01:FahCore 0x21 started
13:36:55:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
13:36:55:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9415 run:2200 clone:4 gen:59 core:0x21 unit:0x00000043ab436c9d585e06dd1872898d
13:36:56:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
13:36:56:WU01:FS01:Connecting to 171.67.108.157:8080
13:36:56:WU02:FS01:Connecting to 171.67.108.45:80
13:36:56:WU01:FS01:Upload complete
13:36:56:WU01:FS01:Server responded WORK_ACK (400)
13:36:56:WU01:FS01:Cleaning up
13:36:57:WU02:FS01:Assigned to work server 171.67.108.157
13:36:57:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
13:36:57:WU02:FS01:Connecting to 171.67.108.157:8080
13:36:59:WU02:FS01

ownloading 5.14MiB
13:36:59:WU02:FS01

ownload complete
13:37:00:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9414 run:1002 clone:4 gen:79 core:0x21 unit:0x00000063ab436c9d585e0697b6ba6172
13:37:00:WU02:FS01:Starting
13:37:00:WU02:FS01:Running FahCore: D:\Folding\FAHClient/FAHCoreWrapper.exe D:/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 02 -suffix 01 -version 704 -lifeline 1624 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
13:37:00:WU02:FS01:Started FahCore on PID 9384
13:37:00:WU02:FS01:Core PID:8364
13:37:00:WU02:FS01:FahCore 0x21 started
13:37:00:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
13:37:01:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9414 run:1002 clone:4 gen:79 core:0x21 unit:0x00000063ab436c9d585e0697b6ba6172
13:37:01:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
13:37:01:WU02:FS01:Connecting to 171.67.108.157:8080
13:37:01:WU01:FS01:Connecting to 171.67.108.45:80
13:37:01:WU02:FS01:Upload complete
13:37:02:WU02:FS01:Server responded WORK_ACK (400)
13:37:02:WU02:FS01:Cleaning up
13:37:02:WU01:FS01:Assigned to work server 171.67.108.157
13:37:02:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
13:37:02:WU01:FS01:Connecting to 171.67.108.157:8080
13:37:04:WU01:FS01

ownloading 5.15MiB
13:37:05:WU01:FS01

ownload complete
13:37:05:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9415 run:1465 clone:1 gen:46 core:0x21 unit:0x00000035ab436c9d585e06d6884c9697
13:37:05:WU01:FS01:Starting
13:37:05:WU01:FS01:Running FahCore: D:\Folding\FAHClient/FAHCoreWrapper.exe D:/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 704 -lifeline 1624 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
13:37:05:WU01:FS01:Started FahCore on PID 10768
13:37:05:WU01:FS01:Core PID:5336
13:37:05:WU01:FS01:FahCore 0x21 started
13:37:06:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
13:37:06:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9415 run:1465 clone:1 gen:46 core:0x21 unit:0x00000035ab436c9d585e06d6884c9697
13:37:06:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
13:37:06:WU01:FS01:Connecting to 171.67.108.157:8080
13:37:06:WU02:FS01:Connecting to 171.67.108.45:80
13:37:06:WU01:FS01:Upload complete
13:37:07:WU01:FS01:Server responded WORK_ACK (400)
13:37:07:WU01:FS01:Cleaning up
13:37:07:WU02:FS01:Assigned to work server 171.67.108.157
13:37:07:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
13:37:07:WU02:FS01:Connecting to 171.67.108.157:8080
13:37:10:WU02:FS01

ownloading 5.15MiB
13:37:10:WU02:FS01

ownload complete
13:37:11:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9415 run:1436 clone:1 gen:707 core:0x21 unit:0x0000034bab436c9d585e06d5e05450ec
13:37:11:WU02:FS01:Starting
13:37:11:WU02:FS01:Running FahCore: D:\Folding\FAHClient/FAHCoreWrapper.exe D:/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 02 -suffix 01 -version 704 -lifeline 1624 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
13:37:11:WU02:FS01:Started FahCore on PID 4484
13:37:11:WU02:FS01:Core PID:3888
13:37:11:WU02:FS01:FahCore 0x21 started
13:37:11:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
13:37:11:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9415 run:1436 clone:1 gen:707 core:0x21 unit:0x0000034bab436c9d585e06d5e05450ec
13:37:11:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
13:37:11:WU02:FS01:Connecting to 171.67.108.157:8080
13:37:12:WU01:FS01:Connecting to 171.67.108.45:80
13:37:12:WU02:FS01:Upload complete
13:37:12:WU02:FS01:Server responded WORK_ACK (400)
13:37:12:WU02:FS01:Cleaning up
13:37:13:WU01:FS01:Assigned to work server 171.67.108.157
13:37:13:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
13:37:13:WU01:FS01:Connecting to 171.67.108.157:8080
13:37:15:WU01:FS01

ownloading 5.14MiB
13:37:16:WU01:FS01

ownload complete
13:37:16:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9415 run:1702 clone:0 gen:747 core:0x21 unit:0x00000373ab436c9d585e06d8e3b1b2eb
13:37:16:WU01:FS01:Starting
13:37:16:WU01:FS01:Running FahCore: D:\Folding\FAHClient/FAHCoreWrapper.exe D:/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 704 -lifeline 1624 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
13:37:16:WU01:FS01:Started FahCore on PID 5788
13:37:16:WU01:FS01:Core PID:6880
13:37:16:WU01:FS01:FahCore 0x21 started
13:37:16:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
13:37:16:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9415 run:1702 clone:0 gen:747 core:0x21 unit:0x00000373ab436c9d585e06d8e3b1b2eb
13:37:17:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
13:37:17:WU01:FS01:Connecting to 171.67.108.157:8080
13:37:17:WU02:FS01:Connecting to 171.67.108.45:80
13:37:17:WU01:FS01:Upload complete
13:37:17:WU01:FS01:Server responded WORK_ACK (400)
13:37:17:WU01:FS01:Cleaning up
13:37:18:WU02:FS01:Assigned to work server 171.67.108.157
13:37:18:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
13:37:18:WU02:FS01:Connecting to 171.67.108.157:8080
13:37:20:WU02:FS01

ownloading 8.88MiB
13:37:21:WU02:FS01

ownload complete
13:37:21:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9431 run:1974 clone:2 gen:279 core:0x21 unit:0x0000015dab436c9d586fdd43a7d4e945
13:37:21:WU02:FS01:Starting
13:37:21:WU02:FS01:Running FahCore: D:\Folding\FAHClient/FAHCoreWrapper.exe D:/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 02 -suffix 01 -version 704 -lifeline 1624 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
13:37:21:WU02:FS01:Started FahCore on PID 9080
13:37:21:WU02:FS01:Core PID:9440
13:37:21:WU02:FS01:FahCore 0x21 started
13:37:22:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
13:37:22:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9431 run:1974 clone:2 gen:279 core:0x21 unit:0x0000015dab436c9d586fdd43a7d4e945
13:37:22:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
13:37:22:WU02:FS01:Connecting to 171.67.108.157:8080
13:37:22:WU01:FS01:Connecting to 171.67.108.45:80
13:37:23:WU02:FS01:Upload complete
13:37:23:WU02:FS01:Server responded WORK_ACK (400)
13:37:23:WU02:FS01:Cleaning up
13:37:24:WU01:FS01:Assigned to work server 171.67.108.157
13:37:24:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
13:37:24:WU01:FS01:Connecting to 171.67.108.157:8080
13:37:26:WU01:FS01

ownloading 5.16MiB
13:37:26:WU01:FS01

ownload complete
13:37:27:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9415 run:2359 clone:1 gen:762 core:0x21 unit:0x0000037cab436c9d585e06df33524fa6
13:37:27:WU01:FS01:Starting
13:37:27:WU01:FS01:Running FahCore: D:\Folding\FAHClient/FAHCoreWrapper.exe D:/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 704 -lifeline 1624 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
13:37:27:WU01:FS01:Started FahCore on PID 9372
13:37:27:WU01:FS01:Core PID:9692
13:37:27:WU01:FS01:FahCore 0x21 started
13:37:27:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
13:37:27:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9415 run:2359 clone:1 gen:762 core:0x21 unit:0x0000037cab436c9d585e06df33524fa6
13:37:27:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
13:37:27:WU01:FS01:Connecting to 171.67.108.157:8080
13:37:28:WU02:FS01:Connecting to 171.67.108.45:80
13:37:28:WU01:FS01:Upload complete
13:37:28:WU01:FS01:Server responded WORK_ACK (400)
13:37:28:WU01:FS01:Cleaning up
13:37:29:WU02:FS01:Assigned to work server 171.67.108.157
13:37:29:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
13:37:29:WU02:FS01:Connecting to 171.67.108.157:8080
13:37:31:WU02:FS01

ownloading 5.14MiB
13:37:31:WU02:FS01

ownload complete
13:37:32:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9415 run:2295 clone:1 gen:360 core:0x21 unit:0x000001aeab436c9d585e06de533ec083
13:37:32:WU02:FS01:Starting
13:37:32:WU02:FS01:Running FahCore: D:\Folding\FAHClient/FAHCoreWrapper.exe D:/FAHClient/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 02 -suffix 01 -version 704 -lifeline 1624 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
13:37:32:WU02:FS01:Started FahCore on PID 5812
13:37:32:WU02:FS01:Core PID:10516
13:37:32:WU02:FS01:FahCore 0x21 started
13:37:33:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
13:37:33:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9415 run:2295 clone:1 gen:360 core:0x21 unit:0x000001aeab436c9d585e06de533ec083
13:37:33:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
13:37:33:WU02:FS01:Connecting to 171.67.108.157:8080
13:37:33:WU02:FS01:Upload complete
13:37:34:WU02:FS01:Server responded WORK_ACK (400)
13:37:34:WU02:FS01:Cleaning up

Bumblebee · 8. Februar 2018

CrashStyle schrieb:
Mit DDU Treiber deinstalliert und 372.70 im abgesicherten modus installiert. Nach einem neustart weiter folden lassen! Da aber die PPD im Vergleich zum 390.77 (290k) 372.70 (260k), Stoppte ich alles und machte nochmal einen neustart. Jetzt kommt nur noch Failed auf der GPU und das steht im LOG!

War es ein Fehler die WU nicht habe fertig rechnen lassen vor dem Treiber wechsel!?

HILFE!

Nun, eigentlich sollte nichts passieren... eigentlich
Besser ist es aber schon auf "Nummer Sicher" zu gehen

Bei dir hat er aber nicht bloss die eine "angekaute" WU verworfen (was ich noch nachvollziehen könnte) sondern nun mag er gar nicht mehr

Deinstalliere mal den Clienten und bau neu auf

CrashStyle · 8. Februar 2018

Bumblebee schrieb:
Nun, eigentlich sollte nichts passieren... eigentlich
Besser ist es aber schon auf "Nummer Sicher" zu gehen

Bei dir hat er aber nicht bloss die eine "angekaute" WU verworfen (was ich noch nachvollziehen könnte) sondern nun mag er gar nicht mehr

Deinstalliere mal den Clienten und bau neu auf

Auf Nummer Sicher heist? Stopen, Client schließen und dan Treiber wechsel machen!?

foldinghomealone · 8. Februar 2018

Ich würde keine Treiberwechsel während einer WU empfehlen.
V.A. da sich der Client immer schwer tut, Änderungen am System zu erkennen. Deswegen ist nach Änderungen am System eigentlich immer eine Neuinstallation des Clients ratsam.

Also wenn möglich, finishen oder in den sauren Apfel beißen und den GPU-Slot löschen (damit die abgebrochene WU nicht im Nirvana hängen bleibt), Treiber DDUen und neuinstallieren, Client neu installieren. OC-Settings auf normal und wieder langsam an alte Settings herantasten.

foldinghomealone · 8. Februar 2018

Chris-W201-Fan schrieb:
Das würde für eine mangelnde Nutzbarkeit der Gesammtleistung der GPU sprechen, sei es weil es nicht weiter Parallelisierbar ist, weil bestimmte Teile der GPU hier begrenzen, ohne das die Anzeige das zeigen kann, , ...

Linux erreicht mit PCIe 3.0 x16/x8 mehr PPD als Windows. Auch soll lt. FF der Unterschied von x8 auf x4 in Linux deutlich geringer sein als in Windows.
Diese Themen werden im FF meist unter "PCIe speed" oder ähnlich diskutiert. Deshalb habe ich das hier auch so genannt.
Testen kann ich das nicht, weil ich ein Linux-Depp bin.
Als Gründe werden Unterschiede im Hardware Abstraction Layer genannt. Linux erlaubt da mehr Computingleistung welche Windows wohl ggü. Stabilität und weil GPUs in Windowssystemen primär zur Anzeige verwendet werden, etwas begrenzt. So weit mein laienhafter Wissensstand.

Bzgl. FAHcore_22:
Core 21 verwendet OpenGL als Schnittstelle, um für ATI und NVs den gleichen Core verwenden zu können. (das spart spärlich vorhandene Entwicklungsarbeit bei FAH).
NVs nutzen originär ihren eigenen CUDA-Befahlssatz und müssen wohl beim Ausführen von OpenGL-Coden diesen erst in CUDA-Code übersetzen, was Rechenleistung kostet.
Es wird gemunkelt, dass Core 22 sowohl OpenGL für ATI und CUDA für NV unterstützt. Somit soll der Core 22 bei NVs schneller sein.

CrashStyle · 8. Februar 2018

Geht trotz neuinstallation nicht!

*********************** Log Started 2018-02-08T14:32:04Z ***********************
14:32:04:************************* Folding@home Client *************************
14:32:04: Website: Front Page - Folding@home
14:32:04: Copyright: (c) 2009-2014 Stanford University
14:32:04: Author: Joseph Coffland <joseph@cauldrondevelopment.com>
14:32:04: Args: --open-web-control
14:32:04: Config: <none>
14:32:04:******************************** Build ********************************
14:32:04: Version: 7.4.4
14:32:04: Date: Mar 4 2014
14:32:04: Time: 20:26:54
14:32:04: SVN Rev: 4130
14:32:04: Branch: fah/trunk/client
14:32:04: Compiler: Intel(R) C++ MSVC 1500 mode 1200
14:32:04: Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
14:32:04: /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
14:32:04: Platform: win32 XP
14:32:04: Bits: 32
14:32:04: Mode: Release
14:32:04:******************************* System ********************************
14:32:04: CPU: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz
14:32:04: CPU ID: GenuineIntel Family 6 Model 94 Stepping 3
14:32:04: CPUs: 4
14:32:04: Memory: 15.93GiB
14:32:04: Free Memory: 12.69GiB
14:32:04: Threads: WINDOWS_THREADS
14:32:04: OS Version: 6.2
14:32:04: Has Battery: false
14:32:04: On Battery: false
14:32:04: UTC Offset: 1
14:32:04: PID: 12048
14:32:04: CWD: E:/FAH Config & Data
14:32:04: OS: Windows 10 Home
14:32:04: OS Arch: AMD64
14:32:04: GPUs: 0
14:32:04: CUDA: Not detected
14:32:04:Win32 Service: false
14:32:04:***********************************************************************
14:32:04:<config>
14:32:04: 
14:32:04:</config>
14:32:04:Connecting to assign-GPU.stanford.edu:80
14:32:05:Updated GPUs.txt
14:32:05:Read GPUs.txt
14:32:05:Trying to access database...
14:32:05:Successfully acquired database lock
14:32:05:Enabled folding slot 00: PAUSED cpu:2 (not configured)
14:32:05:Enabled folding slot 01: PAUSED gpu:0:GM204 [GeForce GTX 970] (not configured)
14:33:06:Saving configuration to config.xml
14:33:06:<config>
14:33:06: 
14:33:06: <slot id='0' type='CPU'/>
14:33:06: <slot id='1' type='GPU'/>
14:33:06:</config>
14:33:06:Set client configured
14:33:06:WU00:FS00:Connecting to 171.67.108.45:8080
14:33:06:WU01:FS01:Connecting to 171.67.108.45:8080
14:33:07:WU00:FS00:Connecting to 171.67.108.45:8080
14:33:07:WU01:FS01:Connecting to 171.67.108.45:80
14:33:07:WU00:FS00:Assigned to work server 134.139.52.3
14:33:07:WU00:FS00:Requesting new work unit for slot 00: READY cpu:2 from 134.139.52.3
14:33:07:WU00:FS00:Connecting to 134.139.52.3:8080
14:33:07:WU01:FS01:Assigned to work server 171.67.108.157
14:33:07:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:33:07:WU01:FS01:Connecting to 171.67.108.157:8080
14:33:08:ERROR:WU00:FS00:Exception: Server did not assign work unit
14:33:08:WU00:FS00:Connecting to 171.67.108.45:8080
14:33:09:WU00:FS00:Assigned to work server 155.247.166.220
14:33:09:WU00:FS00:Requesting new work unit for slot 00: READY cpu:2 from 155.247.166.220
14:33:09:WU00:FS00:Connecting to 155.247.166.220:8080
14:33:09:WU01:FS01

ownloading 5.15MiB
14:33:10:WU01:FS01

ownload complete
14:33:10:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9415 run:2694 clone:1 gen:755 core:0x21 unit:0x0000036dab436c9d585e06e2466b404c
14:33:10:WU01:FS01

ownloading core from http://fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah
14:33:10:WU01:FS01:Connecting to fahwebx.stanford.edu:80
14:33:11:WU01:FS01:FahCore 21: Downloading 3.47MiB
14:33:11:WU00:FS00

ownloading 334.05KiB
14:33:11:WU00:FS00

ownload complete
14:33:11:WU00:FS00:Received Unit: id:00 state

OWNLOAD error:NO_ERROR project:8656 run:2660 clone:0 gen:27 core:0xa4 unit:0x000000210002894c57f13648a0a75a30
14:33:11:WU00:FS00

ownloading core from http://fahwebx.stanford.edu/cores/Win32/AMD64/Core_a4.fah
14:33:11:WU00:FS00:Connecting to fahwebx.stanford.edu:80
14:33:12:WU00:FS00:FahCore a4: Downloading 2.89MiB
14:33:16:WU00:FS00:FahCore a4: Download complete
14:33:16:WU01:FS01:FahCore 21: Download complete
14:33:16:WU00:FS00:Valid core signature
14:33:16:WU00:FS00:Unpacked 9.59MiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/Core_a4.fah/FahCore_a4.exe
14:33:16:WU00:FS00:Starting
14:33:16:WU00:FS00:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/Core_a4.fah/FahCore_a4.exe" -dir 00 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -np 2
14:33:16:WU00:FS00:Started FahCore on PID 1652
14:33:17:WU00:FS00:Core PID:9120
14:33:17:WU00:FS00:FahCore 0xa4 started
14:33:17:WU01:FS01:Valid core signature
14:33:17:WU01:FS01:Unpacked 11.80MiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe
14:33:17:WU01:FS01:Starting
14:33:17:WU01:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 01 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
14:33:17:WU01:FS01:Started FahCore on PID 8812
14:33:17:WU00:FS00:0xa4:
14:33:17:WU00:FS00:0xa4:*------------------------------*
14:33:17:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
14:33:17:WU00:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
14:33:17:WU00:FS00:0xa4:
14:33:17:WU00:FS00:0xa4

reparing to commence simulation
14:33:17:WU00:FS00:0xa4:- Looking at optimizations...
14:33:17:WU00:FS00:0xa4:- Created dyn
14:33:17:WU00:FS00:0xa4:- Files status OK
14:33:17:WU00:FS00:0xa4:- Expanded 341556 -> 535948 (decompressed 156.9 percent)
14:33:17:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=341556 data_size=535948, decompressed_data_size=535948 diff=0
14:33:17:WU00:FS00:0xa4:- Digital signature verified
14:33:17:WU00:FS00:0xa4:
14:33:17:WU00:FS00:0xa4

roject: 8656 (Run 2660, Clone 0, Gen 27)
14:33:17:WU00:FS00:0xa4:
14:33:17:WU00:FS00:0xa4:Assembly optimizations on if available.
14:33:17:WU00:FS00:0xa4:Entering M.D.
14:33:17:WU01:FS01:Core PID:9092
14:33:17:WU01:FS01:FahCore 0x21 started
14:33:18:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:33:18:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9415 run:2694 clone:1 gen:755 core:0x21 unit:0x0000036dab436c9d585e06e2466b404c
14:33:18:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
14:33:18:WU01:FS01:Connecting to 171.67.108.157:8080
14:33:18:WU02:FS01:Connecting to 171.67.108.45:80
14:33:18:WU01:FS01:Upload complete
14:33:19:WU01:FS01:Server responded WORK_ACK (400)
14:33:19:WU01:FS01:Cleaning up
14:33:19:WU02:FS01:Assigned to work server 171.67.108.157
14:33:19:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:33:19:WU02:FS01:Connecting to 171.67.108.157:8080
14:33:22:WU02:FS01

ownloading 5.14MiB
14:33:22:WU02:FS01

ownload complete
14:33:23:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9415 run:2470 clone:0 gen:627 core:0x21 unit:0x000002e8ab436c9d585e06e059902dc1
14:33:23:WU02:FS01:Starting
14:33:23:WU02:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 02 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
14:33:23:WU02:FS01:Started FahCore on PID 3848
14:33:23:WU02:FS01:Core PID:12036
14:33:23:WU02:FS01:FahCore 0x21 started
14:33:23:WU00:FS00:0xa4:Mapping NT from 2 to 2
14:33:23:WU00:FS00:0xa4:Completed 0 out of 2500000 steps (0%)
14:33:23:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:33:23:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9415 run:2470 clone:0 gen:627 core:0x21 unit:0x000002e8ab436c9d585e06e059902dc1
14:33:23:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
14:33:23:WU02:FS01:Connecting to 171.67.108.157:8080
14:33:23:WU01:FS01:Connecting to 171.67.108.45:80
14:33:24:WU02:FS01:Upload complete
14:33:24:WU01:FS01:Assigned to work server 171.67.108.157
14:33:24:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:33:24:WU01:FS01:Connecting to 171.67.108.157:8080
14:33:24:WU02:FS01:Server responded WORK_ACK (400)
14:33:24:WU02:FS01:Cleaning up
14:33:26:WU01:FS01

ownloading 8.81MiB
14:33:27:WU01:FS01

ownload complete
14:33:27:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9431 run:360 clone:4 gen:124 core:0x21 unit:0x0000009bab436c9d586fdd360fe030e8
14:33:27:WU01:FS01:Starting
14:33:27:WU01:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 01 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
14:33:27:WU01:FS01:Started FahCore on PID 5324
14:33:27:WU01:FS01:Core PID:10004
14:33:27:WU01:FS01:FahCore 0x21 started
14:33:28:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:33:28:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9431 run:360 clone:4 gen:124 core:0x21 unit:0x0000009bab436c9d586fdd360fe030e8
14:33:28:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
14:33:28:WU01:FS01:Connecting to 171.67.108.157:8080
14:33:28:WU02:FS01:Connecting to 171.67.108.45:80
14:33:29:WU01:FS01:Upload complete
14:33:29:WU01:FS01:Server responded WORK_ACK (400)
14:33:29:WU01:FS01:Cleaning up
14:33:29:WU02:FS01:Assigned to work server 171.67.108.157
14:33:29:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:33:29:WU02:FS01:Connecting to 171.67.108.157:8080
14:33:31:WU02:FS01

ownloading 5.18MiB
14:33:31:WU02:FS01

ownload complete
14:33:32:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9414 run:5 clone:3 gen:332 core:0x21 unit:0x00000195ab436c9d585e06905432a58d
14:33:32:WU02:FS01:Starting
14:33:32:WU02:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 02 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
14:33:32:WU02:FS01:Started FahCore on PID 1076
14:33:32:WU02:FS01:Core PID:12860
14:33:32:WU02:FS01:FahCore 0x21 started
14:33:32:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:33:32:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9414 run:5 clone:3 gen:332 core:0x21 unit:0x00000195ab436c9d585e06905432a58d
14:33:32:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
14:33:32:WU02:FS01:Connecting to 171.67.108.157:8080
14:33:32:WU01:FS01:Connecting to 171.67.108.45:80
14:33:33:WU02:FS01:Upload complete
14:33:33:WU02:FS01:Server responded WORK_ACK (400)
14:33:33:WU02:FS01:Cleaning up
14:33:33:WU01:FS01:Assigned to work server 171.67.108.157
14:33:33:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:33:33:WU01:FS01:Connecting to 171.67.108.157:8080
14:33:35:WU01:FS01

ownloading 8.86MiB
14:33:39:WU01:FS01

ownload complete
14:33:40:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9431 run:1102 clone:1 gen:483 core:0x21 unit:0x0000024cab436c9d586fdd3c8ae68de4
14:33:40:WU01:FS01:Starting
14:33:40:WU01:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 01 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
14:33:40:WU01:FS01:Started FahCore on PID 4636
14:33:40:WU01:FS01:Core PID:8316
14:33:40:WU01:FS01:FahCore 0x21 started
14:33:40:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:33:40:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9431 run:1102 clone:1 gen:483 core:0x21 unit:0x0000024cab436c9d586fdd3c8ae68de4
14:33:40:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
14:33:40:WU01:FS01:Connecting to 171.67.108.157:8080
14:33:40:WU02:FS01:Connecting to 171.67.108.45:80
14:33:41:WU01:FS01:Upload complete
14:33:41:WU01:FS01:Server responded WORK_ACK (400)
14:33:41:WU01:FS01:Cleaning up
14:33:41:WU02:FS01:Assigned to work server 171.67.108.157
14:33:41:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:33:41:WU02:FS01:Connecting to 171.67.108.157:8080
14:33:43:WU02:FS01

ownloading 5.12MiB
14:33:43:WU02:FS01

ownload complete
14:33:43:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9414 run:2601 clone:0 gen:709 core:0x21 unit:0x00000357ab436c9d585e06a407510fab
14:33:43:WU02:FS01:Starting
14:33:43:WU02:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 02 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
14:33:43:WU02:FS01:Started FahCore on PID 4984
14:33:43:WU02:FS01:Core PID:10644
14:33:43:WU02:FS01:FahCore 0x21 started
14:33:44:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:33:44:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9414 run:2601 clone:0 gen:709 core:0x21 unit:0x00000357ab436c9d585e06a407510fab
14:33:44:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
14:33:44:WU02:FS01:Connecting to 171.67.108.157:8080
14:33:44:WU01:FS01:Connecting to 171.67.108.45:80
14:33:44:WU02:FS01:Upload complete
14:33:44:WU02:FS01:Server responded WORK_ACK (400)
14:33:44:WU02:FS01:Cleaning up
14:33:45:WU01:FS01:Assigned to work server 171.67.108.157
14:33:45:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:33:45:WU01:FS01:Connecting to 171.67.108.157:8080
14:33:46:Saving configuration to config.xml
14:33:46:<config>
14:33:46: 
14:33:46: <proxy v=':8080'/>
14:33:46:
14:33:46: 
14:33:46: <passkey v='********************************'/>
14:33:46: <team v='70335'/>
14:33:46: <user v='CrashStyle'/>
14:33:46:
14:33:46: 
14:33:46: <slot id='0' type='CPU'/>
14:33:46: <slot id='1' type='GPU'/>
14:33:46:</config>
14:33:46:FS00

aused
14:33:46:FS01

aused
14:33:46:FS00:Shutting core down
14:33:46:WU01:FS01

ownloading 5.17MiB
14:33:47:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
14:33:48:WU01:FS01

ownload complete
14:33:48:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9415 run:2291 clone:0 gen:737 core:0x21 unit:0x00000357ab436c9d585e06de8c2c3dea
14:34:07:Saving configuration to config.xml
14:34:07:<config>
14:34:07: 
14:34:07: <proxy v=':8080'/>
14:34:07:
14:34:07: 
14:34:07: <passkey v='********************************'/>
14:34:07: <team v='70335'/>
14:34:07: <user v='CrashStyle'/>
14:34:07:
14:34:07: 
14:34:07: <slot id='0' type='CPU'>
14:34:07: <paused v='true'/>
14:34:07: </slot>
14:34:07: <slot id='1' type='GPU'>
14:34:07: <paused v='true'/>
14:34:07: </slot>
14:34:07:</config>
14:35:08:Saving configuration to config.xml
14:35:08:<config>
14:35:08: 
14:35:08: <proxy v=':8080'/>
14:35:08:
14:35:08: 
14:35:08: <power v='full'/>
14:35:08:
14:35:08: 
14:35:08: <passkey v='********************************'/>
14:35:08: <team v='70335'/>
14:35:08: <user v='CrashStyle'/>
14:35:08:
14:35:08: 
14:35:08: <slot id='0' type='CPU'>
14:35:08: <paused v='true'/>
14:35:08: </slot>
14:35:08: <slot id='1' type='GPU'>
14:35:08: <paused v='true'/>
14:35:08: </slot>
14:35:08:</config>
14:40:12:Saving configuration to config.xml
14:40:12:<config>
14:40:12: 
14:40:12: <proxy v=':8080'/>
14:40:12:
14:40:12: 
14:40:12: <power v='full'/>
14:40:12:
14:40:12: 
14:40:12: <passkey v='********************************'/>
14:40:12: <team v='70335'/>
14:40:12: <user v='CrashStyle'/>
14:40:12:
14:40:12: 
14:40:12: <slot id='0' type='CPU'>
14:40:12: <cpus v='3'/>
14:40:12: <paused v='true'/>
14:40:12: </slot>
14:40:12: <slot id='1' type='GPU'>
14:40:12: <paused v='true'/>
14:40:12: </slot>
14:40:12:</config>
14:40:13:Saving configuration to config.xml
14:40:13:<config>
14:40:13: 
14:40:13: <proxy v=':8080'/>
14:40:13:
14:40:13: 
14:40:13: <power v='full'/>
14:40:13:
14:40:13: 
14:40:13: <passkey v='********************************'/>
14:40:13: <team v='70335'/>
14:40:13: <user v='CrashStyle'/>
14:40:13:
14:40:13: 
14:40:13: <slot id='0' type='CPU'>
14:40:13: <cpus v='3'/>
14:40:13: <paused v='true'/>
14:40:13: </slot>
14:40:13: <slot id='1' type='GPU'>
14:40:13: <paused v='true'/>
14:40:13: </slot>
14:40:13:</config>
14:41:40:Saving configuration to config.xml
14:41:40:<config>
14:41:40: 
14:41:40: <proxy v=':8080'/>
14:41:40:
14:41:40: 
14:41:40: <power v='full'/>
14:41:40:
14:41:40: 
14:41:40: <passkey v='********************************'/>
14:41:40: <team v='70335'/>
14:41:40: <user v='CrashStyle'/>
14:41:40:
14:41:40: 
14:41:40: <slot id='0' type='CPU'>
14:41:40: <cpus v='3'/>
14:41:40: <paused v='true'/>
14:41:40: </slot>
14:41:40: <slot id='1' type='GPU'>
14:41:40: <client-type v='advanced'/>
14:41:40: <extra-core-args v='-tmax=80 -twait=900'/>
14:41:40: <paused v='true'/>
14:41:40: </slot>
14:41:40:</config>
14:42:15:Saving configuration to config.xml
14:42:15:<config>
14:42:15: 
14:42:15: <proxy v=':8080'/>
14:42:15:
14:42:15: 
14:42:15: <power v='full'/>
14:42:15:
14:42:15: 
14:42:15: <passkey v='********************************'/>
14:42:15: <team v='70335'/>
14:42:15: <user v='CrashStyle'/>
14:42:15:
14:42:15: 
14:42:15: <slot id='0' type='CPU'>
14:42:15: <cpus v='3'/>
14:42:15: <paused v='true'/>
14:42:15: </slot>
14:42:15: <slot id='1' type='GPU'>
14:42:15: <client-type v='advanced'/>
14:42:15: <extra-core-args v='-tmax=80 -twait=900'/>
14:42:15: <paused v='true'/>
14:42:15: </slot>
14:42:15:</config>
14:42:33:FS01:Unpaused
14:42:33:WU01:FS01:Starting
14:42:33:WU01:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 01 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
14:42:33:WU01:FS01:Started FahCore on PID 5920
14:42:34:WU01:FS01:Core PID:9236
14:42:34:WU01:FS01:FahCore 0x21 started
14:42:34:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:42:34:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9415 run:2291 clone:0 gen:737 core:0x21 unit:0x00000357ab436c9d585e06de8c2c3dea
14:42:34:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
14:42:34:WU01:FS01:Connecting to 171.67.108.157:8080
14:42:34:WU02:FS01:Connecting to 171.67.108.45:80
14:42:34:WU01:FS01:Upload complete
14:42:34:WU01:FS01:Server responded WORK_ACK (400)
14:42:34:WU01:FS01:Cleaning up
14:42:35:WU02:FS01:Assigned to work server 171.67.108.157
14:42:35:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:42:35:WU02:FS01:Connecting to 171.67.108.157:8080
14:42:37:WU02:FS01

ownloading 5.17MiB
14:42:38:WU02:FS01

ownload complete
14:42:38:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9415 run:1391 clone:0 gen:776 core:0x21 unit:0x0000037bab436c9d585e06d58ab8ad57
14:42:38:WU02:FS01:Starting
14:42:38:WU02:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 02 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
14:42:38:WU02:FS01:Started FahCore on PID 7984
14:42:38:WU02:FS01:Core PID:4728
14:42:38:WU02:FS01:FahCore 0x21 started
14:42:38:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:42:38:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9415 run:1391 clone:0 gen:776 core:0x21 unit:0x0000037bab436c9d585e06d58ab8ad57
14:42:38:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
14:42:38:WU02:FS01:Connecting to 171.67.108.157:8080
14:42:39:WU01:FS01:Connecting to 171.67.108.45:80
14:42:39:WU02:FS01:Upload complete
14:42:39:WU02:FS01:Server responded WORK_ACK (400)
14:42:39:WU02:FS01:Cleaning up
14:42:39:WU01:FS01:Assigned to work server 171.67.108.157
14:42:39:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:42:39:WU01:FS01:Connecting to 171.67.108.157:8080
14:42:41:WU01:FS01

ownloading 5.16MiB
14:42:42:WU01:FS01

ownload complete
14:42:42:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9414 run:414 clone:2 gen:164 core:0x21 unit:0x000000c6ab436c9d585e0692a9fd7416
14:42:42:WU01:FS01:Starting
14:42:42:WU01:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 01 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
14:42:42:WU01:FS01:Started FahCore on PID 8744
14:42:42:WU01:FS01:Core PID:11528
14:42:42:WU01:FS01:FahCore 0x21 started
14:42:43:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:42:43:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9414 run:414 clone:2 gen:164 core:0x21 unit:0x000000c6ab436c9d585e0692a9fd7416
14:42:43:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
14:42:43:WU01:FS01:Connecting to 171.67.108.157:8080
14:42:43:WU02:FS01:Connecting to 171.67.108.45:80
14:42:43:WU01:FS01:Upload complete
14:42:44:WU01:FS01:Server responded WORK_ACK (400)
14:42:44:WU01:FS01:Cleaning up
14:42:44:WU02:FS01:Assigned to work server 171.67.108.157
14:42:44:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:42:44:WU02:FS01:Connecting to 171.67.108.157:8080
14:42:46:WU02:FS01

ownloading 8.87MiB
14:42:47:WU02:FS01

ownload complete
14:42:48:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9431 run:1157 clone:2 gen:556 core:0x21 unit:0x0000029aab436c9d586fdd3d5f4af42f
14:42:48:WU02:FS01:Starting
14:42:48:WU02:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 02 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
14:42:48:WU02:FS01:Started FahCore on PID 12056
14:42:48:WU02:FS01:Core PID:10376
14:42:48:WU02:FS01:FahCore 0x21 started
14:42:48:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:42:48:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9431 run:1157 clone:2 gen:556 core:0x21 unit:0x0000029aab436c9d586fdd3d5f4af42f
14:42:48:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
14:42:48:WU02:FS01:Connecting to 171.67.108.157:8080
14:42:48:WU01:FS01:Connecting to 171.67.108.45:80
14:42:49:WU01:FS01:Assigned to work server 171.67.108.157
14:42:49:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:42:49:WU01:FS01:Connecting to 171.67.108.157:8080
14:42:49:WU02:FS01:Upload complete
14:42:49:WU02:FS01:Server responded WORK_ACK (400)
14:42:49:WU02:FS01:Cleaning up
14:42:51:WU01:FS01

ownloading 5.15MiB
14:42:52:WU01:FS01

ownload complete
14:42:52:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9414 run:1505 clone:1 gen:527 core:0x21 unit:0x0000027dab436c9d585e069b913fcb97
14:42:52:WU01:FS01:Starting
14:42:52:WU01:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 01 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
14:42:52:WU01:FS01:Started FahCore on PID 11504
14:42:52:WU01:FS01:Core PID:6896
14:42:52:WU01:FS01:FahCore 0x21 started
14:42:52:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:42:52:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9414 run:1505 clone:1 gen:527 core:0x21 unit:0x0000027dab436c9d585e069b913fcb97
14:42:52:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
14:42:52:WU01:FS01:Connecting to 171.67.108.157:8080
14:42:53:WU02:FS01:Connecting to 171.67.108.45:80
14:42:53:WU01:FS01:Upload complete
14:42:53:WU01:FS01:Server responded WORK_ACK (400)
14:42:53:WU01:FS01:Cleaning up
14:42:53:WU02:FS01:Assigned to work server 171.67.108.157
14:42:53:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:42:53:WU02:FS01:Connecting to 171.67.108.157:8080
14:42:55:WU02:FS01

ownloading 5.17MiB
14:42:56:WU02:FS01

ownload complete
14:42:56:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9414 run:1631 clone:1 gen:91 core:0x21 unit:0x00000076ab436c9d585e069c46563af8
14:42:56:WU02:FS01:Starting
14:42:56:WU02:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 02 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
14:42:56:WU02:FS01:Started FahCore on PID 1088
14:42:56:WU02:FS01:Core PID:7908
14:42:56:WU02:FS01:FahCore 0x21 started
14:42:57:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:42:57:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9414 run:1631 clone:1 gen:91 core:0x21 unit:0x00000076ab436c9d585e069c46563af8
14:42:57:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
14:42:57:WU02:FS01:Connecting to 171.67.108.157:8080
14:42:57:WU01:FS01:Connecting to 171.67.108.45:80
14:42:58:WU01:FS01:Assigned to work server 171.67.108.157
14:42:58:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:42:58:WU01:FS01:Connecting to 171.67.108.157:8080
14:42:59:WU02:FS01:Upload complete
14:42:59:WU02:FS01:Server responded WORK_ACK (400)
14:42:59:WU02:FS01:Cleaning up
14:43:00:WU01:FS01

ownloading 8.86MiB
14:43:01:WU01:FS01

ownload complete
14:43:01:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9431 run:1402 clone:0 gen:787 core:0x21 unit:0x000003b0ab436c9d586fdd3f6363ab83
14:43:01:WU01:FS01:Starting
14:43:01:WU01:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 01 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
14:43:01:WU01:FS01:Started FahCore on PID 8844
14:43:01:WU01:FS01:Core PID:12024
14:43:01:WU01:FS01:FahCore 0x21 started
14:43:01:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:43:01:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9431 run:1402 clone:0 gen:787 core:0x21 unit:0x000003b0ab436c9d586fdd3f6363ab83
14:43:01:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
14:43:01:WU01:FS01:Connecting to 171.67.108.157:8080
14:43:02:WU02:FS01:Connecting to 171.67.108.45:80
14:43:02:WU01:FS01:Upload complete
14:43:02:WU01:FS01:Server responded WORK_ACK (400)
14:43:02:WU01:FS01:Cleaning up
14:43:02:WU02:FS01:Assigned to work server 171.67.108.157
14:43:02:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:43:02:WU02:FS01:Connecting to 171.67.108.157:8080
14:43:04:WU02:FS01

ownloading 5.18MiB
14:43:05:WU02:FS01

ownload complete
14:43:05:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9415 run:1366 clone:1 gen:497 core:0x21 unit:0x0000024bab436c9d585e06d5aa4f067b
14:43:05:WU02:FS01:Starting
14:43:05:WU02:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 02 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
14:43:05:WU02:FS01:Started FahCore on PID 5804
14:43:05:WU02:FS01:Core PID:2820
14:43:05:WU02:FS01:FahCore 0x21 started
14:43:06:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:43:06:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9415 run:1366 clone:1 gen:497 core:0x21 unit:0x0000024bab436c9d585e06d5aa4f067b
14:43:06:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
14:43:06:WU02:FS01:Connecting to 171.67.108.157:8080
14:43:06:WU01:FS01:Connecting to 171.67.108.45:80
14:43:06:WU02:FS01:Upload complete
14:43:06:WU02:FS01:Server responded WORK_ACK (400)
14:43:06:WU02:FS01:Cleaning up
14:43:07:WU01:FS01:Assigned to work server 171.67.108.157
14:43:07:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:43:07:WU01:FS01:Connecting to 171.67.108.157:8080
14:43:09:WU01:FS01

ownloading 8.89MiB
14:43:10:WU01:FS01

ownload complete
14:43:10:WU01:FS01:Received Unit: id:01 state

OWNLOAD error:NO_ERROR project:9431 run:389 clone:2 gen:399 core:0x21 unit:0x000001f9ab436c9d586fdd37c91a445a
14:43:10:WU01:FS01:Starting
14:43:10:WU01:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 01 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
14:43:10:WU01:FS01:Started FahCore on PID 7964
14:43:10:WU01:FS01:Core PID:10936
14:43:10:WU01:FS01:FahCore 0x21 started
14:43:11:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:43:11:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9431 run:389 clone:2 gen:399 core:0x21 unit:0x000001f9ab436c9d586fdd37c91a445a
14:43:11:WU01:FS01:Uploading 5.50KiB to 171.67.108.157
14:43:11:WU01:FS01:Connecting to 171.67.108.157:8080
14:43:11:WU02:FS01:Connecting to 171.67.108.45:80
14:43:12:WU02:FS01:Assigned to work server 171.67.108.157
14:43:12:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 970] from 171.67.108.157
14:43:12:WU02:FS01:Connecting to 171.67.108.157:8080
14:43:12:WU01:FS01:Upload complete
14:43:12:WU01:FS01:Server responded WORK_ACK (400)
14:43:12:WU01:FS01:Cleaning up
14:43:13:WU02:FS01

ownloading 8.85MiB
14:43:15:WU02:FS01

ownload complete
14:43:15:WU02:FS01:Received Unit: id:02 state

OWNLOAD error:NO_ERROR project:9431 run:309 clone:4 gen:319 core:0x21 unit:0x00000182ab436c9d586fdd3669cff9bb
14:43:15:WU02:FS01:Starting
14:43:15:WU02:FS01:Running FahCore: E:\FAHClient/FAHCoreWrapper.exe "E:/FAH Config & Data/cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe" -dir 02 -suffix 01 -version 704 -lifeline 12048 -checkpoint 15 -gpu 0 -gpu-vendor nvidia -tmax=80 -twait=900
14:43:15:WU02:FS01:Started FahCore on PID 13260
14:43:15:WU02:FS01:Core PID:1208
14:43:15:WU02:FS01:FahCore 0x21 started
14:43:16:Saving configuration to config.xml
14:43:16:<config>
14:43:16: 
14:43:16: <proxy v=':8080'/>
14:43:16:
14:43:16: 
14:43:16: <power v='full'/>
14:43:16:
14:43:16: 
14:43:16: <passkey v='********************************'/>
14:43:16: <team v='70335'/>
14:43:16: <user v='CrashStyle'/>
14:43:16:
14:43:16: 
14:43:16: <slot id='0' type='CPU'>
14:43:16: <cpus v='3'/>
14:43:16: <paused v='true'/>
14:43:16: </slot>
14:43:16: <slot id='1' type='GPU'>
14:43:16: <client-type v='advanced'/>
14:43:16: <extra-core-args v='-tmax=80 -twait=900'/>
14:43:16: </slot>
14:43:16:</config>
14:43:16:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:43:16:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9431 run:309 clone:4 gen:319 core:0x21 unit:0x00000182ab436c9d586fdd3669cff9bb
14:43:16:WU02:FS01:Uploading 5.50KiB to 171.67.108.157
14:43:16:WU02:FS01:Connecting to 171.67.108.157:8080
14:43:16:WU02:FS01:Upload complete
14:43:17:WU02:FS01:Server responded WORK_ACK (400)
14:43:17:WU02:FS01:Cleaning up

foldinghomealone · 8. Februar 2018

Also du hast folgendes gemacht, richtig?
- DDU
- Treiber neu installiert
- Windows neu gestartet
- FAHclient neu installiert
- kein OC

Dann auf FOLD und er bricht sofort die WU ab?

Edit:
Machst du nach der Client-Installation einen Neustart?
Ich muss nach jedem Neustart von Windows den FAH-Client neu installieren, sonst habe ich das gleiche Fehlerbild wie du.

c00LsPoT · 8. Februar 2018

Sieht nach OC-Error aus... oder!?

Edit: Obwohl, hat ja noch nicht mal gestartet...

CrashStyle · 8. Februar 2018

foldinghomealone schrieb:
Also du hast folgendes gemacht, richtig?
- DDU
- Treiber neu installiert
- Windows neu gestartet
- FAHclient neu installiert
- kein OC

Dann auf FOLD und er bricht sofort die WU ab?

Edit:
Machst du nach der Client-Installation einen Neustart?
Ich muss nach jedem Neustart von Windows den FAH-Client neu installieren, sonst habe ich das gleiche Fehlerbild wie du.

Vor dem Problem ja!
Nach dem Problem hab ich FAH deinstalliert, neugestartet und installiert... OC hab ich nicht.

foldinghomealone · 8. Februar 2018

Lösch mal die CPU und GPU Slots und füge dann nur den GPU-Slot ohne Slotoptionen hinzu

JayTea · 8. Februar 2018

Dann deinstalliere noch mal den Client, verwende nochmal DDU, installiere den Treiber neu und zum Schluss den Client neu.
Bleibt noch die Frage, welche Treiberversion...

CrashStyle · 8. Februar 2018

foldinghomealone schrieb:
Lösch mal die CPU und GPU Slots und füge dann nur den GPU-Slot ohne Slotoptionen hinzu

Client ist schon deinstalliert

JayTea schrieb:
Dann deinstalliere noch mal den Client, verwende nochmal DDU, installiere den Treiber neu und zum Schluss den Client neu.
Bleibt noch die Frage, welche Treiberversion...

Probiere ich mal... vllt. den 390.77!?

Hasestab · 8. Februar 2018

Also ich kann nicht sagen das die Leistung arg eingebrochen ist.
Anfangs ist meine 1080ti alleine 3.0×16 gelaufen. So habe ich mit dem Ryzen auf 4.0Ghz
Knappe 1.100.000Mio gemacht.
Jetzt ×8 und mit der 1080 im Schlepptau sind es immernoch mindestens 1.050.000Mio im Schnitt mit den selben kleinen Wus.

foldinghomealone · 8. Februar 2018

Sag ich ja, x16 und x8 sind gleich schnell...

Falco · 8. Februar 2018

Macht der CPU Takt eigentlich viel aus beim Gpu Falten??

cubanrice987 · 8. Februar 2018

Also wenn ich hier so lese wie viele Leute doch arge Probleme mit dem Clienten haben, bin ich dann ja doch noch mal mit nem blauen Auge weggekommen.

Seid ich die eine Radeon um 30Mhz runter getaktet hab und die Temperaturziele angehoben habe um die Hardware besser zu kühlen läuft seid 4 1/4 Tagen alles völlig problemlos... 1Mio PPD Ziel wird auch ziemlich durchgehend gehalten, aktuell sogar 1,12Mio PPD Gesamtleistung

Rumpelkammer: PCGH Folding@Home-Thread II

Freizeitschrauber(in)

Software-Overclocker(in)

BIOS-Overclocker(in)

PCGH-Community-Veteran(in)

PCGHX-HWbot-Member (m/w)

F@H-Team-Member & F@H-Moderator

PCGHX-HWbot-Member (m/w)

Software-Overclocker(in)

Software-Overclocker(in)

PCGHX-HWbot-Member (m/w)

Software-Overclocker(in)

Freizeitschrauber(in)

PCGHX-HWbot-Member (m/w)

Software-Overclocker(in)

Software-Overclocker(in)

PCGHX-HWbot-Member (m/w)

PC-Selbstbauer(in)

Software-Overclocker(in)

Freizeitschrauber(in)

F@H-Team-Member (m/w)

Ähnliche Themen