Rumpelkammer: PCGH Folding@Home-Thread II

[Thosch]

Und ich verweise extrem gerne immer wieder mal auf ... ... --> SIV - System Information Viewer
... was übrigens viel mehr kann, bzw anzeigt als die extrem schnöde Temp ... ...
http://rh-software.com/

 

[MessmakerOC]

Danke Abductee!
Vor allem die Menge an Daten

 

[Bumblebee]

.... ist noch jemand am Leben??

über 24 Stunden kein Post

 

[picar81_4711]

Ja freilich! Teste gerade meinen letzten Ramriegel vom 2687W, bis jetzt ohne Fehler....vielleicht gehts ja wieder.....manchmal muss man einfach nur die Rams neu stecken....

 

[Amigafan]

.... ist noch jemand am Leben??

. . .

Ja - Keiner . . . - oder doch Niemand??
Mist - ich verwechsel die beiden immer

 

[A.Meier-PS3]

Was soll den geschrieben werden wenn man faltechnisch nichts zu berichten hat?

Soll ich schreiben daß wir über Pfingsten im Schwarzwald am BMW K 1600-Treffen waren?

 

[Thosch]

... ... nöö ... ...

 

[Abductee]

Hatten wir das Thema nicht schonmal das wir in dein Topcase einen Faltrechner einbauen wollten?

 

[A.Meier-PS3]

Meine bessere Hälfte und ich

Falls jemand noch ein paar Bilder mehr sehen möchte > BMW-K-Forum - Schwarzwald - K 1600 Treffen - 2013 - BMW-Motorrad-Bilder.de - Michael Bense - OSM62



@Abductee: Ja, hatten wir mal.

 

[Abductee]

Wo ist der Team-Aufkleber am Motorrad?

 

[A.Meier-PS3]

Hab keinen unbenutzten mehr (am Twizy hat es auch keinen).

 

[moboKiller]

Juhu mein i7-2600 is aus dr RMA samt GTX550Ti war aber auch n Krampf nur mit ner 6k PPD zu Falten insgesamt 22k machen da schon was mehr her und mein P4 630 fängt auch bald an zu Falten @ 3.2GHz

 

[Bumblebee]

Hab keinen unbenutzten mehr (am Twizy hat es auch keinen).

Kriegst dann noch einen von mir

 

[MessmakerOC]

Ich hab nen Problem mit meiner WU. Weiß jemand was da los ist? (Bild angefügt)

 

[wolf7]

Ich hab nen Problem mit meiner WU. Weiß jemand was da los ist? (Bild angefügt)

Anhang anzeigen 652651

da wirst du scho mal den log hier posten bzw reinkopieren müssen (bestenfalls im spoiler tag). Weil ich glaub anhand dieses Bildes kann dir niemand wirklich weiterhelfen...

 

[MessmakerOC]

Hier ist der Log

Spoiler

*********************** Log Started 2013-05-23T12:46:33Z ***********************
12:46:33:************************* Folding@home Client *************************
12:46:33: Website: Folding@home
12:46:33: Copyright: (c) 2009-2013 Stanford University
12:46:33: Author: Joseph Coffland <joseph@cauldrondevelopment.com>
12:46:33: Args:
12:46:33: Config: C:/Users/Marcus/AppData/Roaming/FAHClient/config.xml
12:46:33:******************************** Build ********************************
12:46:33: Version: 7.3.6
12:46:33: Date: Feb 18 2013
12:46:33: Time: 15:25:17
12:46:33: SVN Rev: 3923
12:46:33: Branch: fah/trunk/client
12:46:33: Compiler: Intel(R) C++ MSVC 1500 mode 1200
12:46:33: Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
12:46:33: /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
12:46:33: Platform: win32 XP
12:46:33: Bits: 32
12:46:33: Mode: Release
12:46:33:******************************* System ********************************
12:46:33: CPU: AMD Phenom(tm) II X6 1090T Processor
12:46:33: CPU ID: AuthenticAMD Family 16 Model 10 Stepping 0
12:46:33: CPUs: 6
12:46:33: Memory: 7.25GiB
12:46:33: Free Memory: 5.54GiB
12:46:33: Threads: WINDOWS_THREADS
12:46:33: Has Battery: false
12:46:33: On Battery: false
12:46:33: UTC offset: 2
12:46:33: PID: 3020
12:46:33: CWD: C:/Users/Marcus/AppData/Roaming/FAHClient
12:46:33: OS: Windows 7 Professional
12:46:33: OS Arch: AMD64
12:46:33: GPUs: 1
12:46:33: GPU 0: ATI:4 Cayman PRO [AMD Radeon 6900 Series]
12:46:33: CUDA: Not detected
12:46:33:Win32 Service: false
12:46:33:***********************************************************************
12:46:33:<config>
12:46:33: <!-- Folding Core -->
12:46:33: <checkpoint v='3'/>
12:46:33:
12:46:33: <!-- Folding Slot Configuration -->
12:46:33: <power v='full'/>
12:46:33:
12:46:33: <!-- Network -->
12:46:33: <proxy v=':8080'/>
12:46:33:
12:46:33: <!-- User Information -->
12:46:33: <passkey v='********************************'/>
12:46:33: <team v='70335'/>
12:46:33: <user v='Messmaker'/>
12:46:33:
12:46:33: <!-- Folding Slots -->
12:46:33: <slot id='1' type='CPU'>
12:46:33: <cpus v='-1'/>
12:46:33: </slot>
12:46:33:</config>
12:46:33:Trying to access database...
12:46:33:Successfully acquired database lock
12:46:33:Enabled folding slot 01: READY cpu:6
12:46:33:WU00:FS01:Starting
12:46:33:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Marcus/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe -dir 00 -suffix 01 -version 703 -lifeline 3020 -checkpoint 3 -np 6
12:46:33:WU00:FS01:Started FahCore on PID 3788
12:46:33:WU00:FS01:Core PID:3872
12:46:33:WU00:FS01:FahCore 0xa3 started
12:46:33:WU00:FS01:0xa3:
12:46:33:WU00:FS01:0xa3:*------------------------------*
12:46:33:WU00:FS01:0xa3:Folding@Home Gromacs SMP Core
12:46:33:WU00:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
12:46:33:WU00:FS01:0xa3:
12:46:33:WU00:FS01:0xa3reparing to commence simulation
12:46:33:WU00:FS01:0xa3:- Ensuring status. Please wait.
12:46:43:WU00:FS01:0xa3:- Looking at optimizations...
12:46:43:WU00:FS01:0xa3:- Working with standard loops on this execution.
12:46:43:WU00:FS01:0xa3:- Previous termination of core was improper.
12:46:43:WU00:FS01:0xa3:- Files status OK
12:46:43:WU00:FS01:0xa3:- Expanded 3815788 -> 4169428 (decompressed 109.2 percent)
12:46:43:WU00:FS01:0xa3:Called DecompressByteArray: compressed_data_size=3815788 data_size=4169428, decompressed_data_size=4169428 diff=0
12:46:43:WU00:FS01:0xa3:- Digital signature verified
12:46:43:WU00:FS01:0xa3:
12:46:43:WU00:FS01:0xa3roject: 6099 (Run 6, Clone 35, Gen 378)
12:46:43:WU00:FS01:0xa3:
12:46:43:WU00:FS01:0xa3:Entering M.D.
12:46:49:WU00:FS01:0xa3:Using Gromacs checkpoints
12:46:49:WU00:FS01:0xa3:Mapping NT from 6 to 6
12:46:49:WU00:FS01:0xa3:Gromacs cannot continue further.
12:46:49:WU00:FS01:0xa3:Going to send back what have done -- stepsTotalG=0
12:46:49:WU00:FS01:0xa3:Work fraction=0.0000 steps=0.
12:46:53:WU00:FS01:0xa3:logfile size=15603 infoLength=15603 edr=0 trr=23
12:46:53:WU00:FS01:0xa3:logfile size: 15603 info=15603 bed=0 hdr=23
12:46:53:WU00:FS01:0xa3:- Writing 16139 bytes of core data to disk...
12:46:53:WU00:FS01:0xa3one: 15627 -> 5032 (compressed to 32.2 percent)
12:46:53:WU00:FS01:0xa3: ... Done.
12:46:54:WU00:FS01:0xa3:
12:46:54:WU00:FS01:0xa3:Folding@home Core Shutdown: UNSTABLE_MACHINE
12:46:54:WARNING:WU00:FS01:FahCore returned: UNSTABLE_MACHINE (122 = 0x7a)
12:46:54:WU00:FS01:Sending unit results: id:00 state:SEND error:FAULTY project:6099 run:6 clone:35 gen:378 core:0xa3 unit:0x000001e10a3b1e594e88a0728884bcbc
12:46:54:WU00:FS01:Uploading 5.41KiB to 128.143.231.202
12:46:54:WU00:FS01:Connecting to 128.143.231.202:8080
12:46:54:WU01:FS01:Connecting to assign3.stanford.edu:8080
12:46:54:WU00:FS01:Upload complete
12:46:54:WU00:FS01:Server responded WORK_ACK (400)
12:46:54:WU00:FS01:Cleaning up
12:46:55:WU01:FS01:News: Welcome to Folding@Home
12:46:55:WU01:FS01:Assigned to work server 128.143.231.202
12:46:55:WU01:FS01:Requesting new work unit for slot 01: READY cpu:6 from 128.143.231.202
12:46:55:WU01:FS01:Connecting to 128.143.231.202:8080
12:46:57:WU01:FS01ownloading 3.67MiB
12:47:00:WU01:FS01ownload complete
12:47:00:WU01:FS01:Received Unit: id:01 stateOWNLOAD error:NO_ERROR project:8585 run:0 clone:6 gen:27 core:0xa3 unit:0x000001590a3b1e5951226131114e5c19
12:47:00:WU01:FS01:Starting
12:47:00:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Marcus/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe -dir 01 -suffix 01 -version 703 -lifeline 3020 -checkpoint 3 -np 6
12:47:00:WU01:FS01:Started FahCore on PID 5372
12:47:00:WU01:FS01:Core PID:5384
12:47:00:WU01:FS01:FahCore 0xa3 started
12:47:00:WU01:FS01:0xa3:
12:47:00:WU01:FS01:0xa3:*------------------------------*
12:47:00:WU01:FS01:0xa3:Folding@Home Gromacs SMP Core
12:47:00:WU01:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
12:47:00:WU01:FS01:0xa3:
12:47:00:WU01:FS01:0xa3reparing to commence simulation
12:47:00:WU01:FS01:0xa3:- Looking at optimizations...
12:47:00:WU01:FS01:0xa3:- Created dyn
12:47:00:WU01:FS01:0xa3:- Files status OK
12:47:00:WU01:FS01:0xa3:- Expanded 3852219 -> 4394668 (decompressed 114.0 percent)
12:47:00:WU01:FS01:0xa3:Called DecompressByteArray: compressed_data_size=3852219 data_size=4394668, decompressed_data_size=4394668 diff=0
12:47:00:WU01:FS01:0xa3:- Digital signature verified
12:47:00:WU01:FS01:0xa3:
12:47:00:WU01:FS01:0xa3roject: 8585 (Run 0, Clone 6, Gen 27)
12:47:00:WU01:FS01:0xa3:
12:47:00:WU01:FS01:0xa3:Assembly optimizations on if available.
12:47:00:WU01:FS01:0xa3:Entering M.D.
12:47:07:WU01:FS01:0xa3:Mapping NT from 6 to 6
12:47:07:WU01:FS01:0xa3:Gromacs cannot continue further.
12:47:07:WU01:FS01:0xa3:Going to send back what have done -- stepsTotalG=0
12:47:07:WU01:FS01:0xa3:Work fraction=0.0000 steps=0.
12:47:11:WU01:FS01:0xa3:Warning: problem accessing logfile 01/wudata_01.log: file not found. status=-2
12:47:11:WU01:FS01:0xa3:logfile size=1048576 infoLength=0 edr=12817214 trr=23
12:47:11:WU01:FS01:0xa3:logfile size: 1048576 info=0 bed=12817214 hdr=23
12:47:11:WU01:FS01:0xa3:Warning: Core could not open logfile 01/wudata_01.log; steps completed=0.
12:47:11:WU01:FS01:0xa3:- Writing 1049112 bytes of core data to disk...
12:47:11:WU01:FS01:0xa3one: 1048600 -> 86 (compressed to 0.0 percent)
12:47:11:WU01:FS01:0xa3: ... Done.
12:47:11:WU01:FS01:0xa3:
12:47:11:WU01:FS01:0xa3:Folding@home Core Shutdown: UNSTABLE_MACHINE
12:47:11:WARNING:WU01:FS01:FahCore returned: UNSTABLE_MACHINE (122 = 0x7a)
12:47:11:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:8585 run:0 clone:6 gen:27 core:0xa3 unit:0x000001590a3b1e5951226131114e5c19
12:47:11:WU01:FS01:Uploading 598B to 128.143.231.202
12:47:11:WU01:FS01:Connecting to 128.143.231.202:8080
12:47:11:WU00:FS01:Connecting to assign3.stanford.edu:8080
12:47:11:WU01:FS01:Upload complete
12:47:11:WU01:FS01:Server responded WORK_ACK (400)
12:47:11:WU01:FS01:Cleaning up
12:47:12:WU00:FS01:News: Welcome to Folding@Home
12:47:12:WU00:FS01:Assigned to work server 128.143.231.202
12:47:12:WU00:FS01:Requesting new work unit for slot 01: READY cpu:6 from 128.143.231.202
12:47:12:WU00:FS01:Connecting to 128.143.231.202:8080
12:47:13:WU00:FS01ownloading 3.67MiB
12:47:16:WU00:FS01ownload complete
12:47:16:WU00:FS01:Received Unit: id:00 stateOWNLOAD error:NO_ERROR project:8579 run:0 clone:8 gen:33 core:0xa3 unit:0x000001590a3b1e59512260983a79aac1
12:47:16:WU00:FS01:Starting
12:47:16:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Marcus/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe -dir 00 -suffix 01 -version 703 -lifeline 3020 -checkpoint 3 -np 6
12:47:16:WU00:FS01:Started FahCore on PID 5848
12:47:16:WU00:FS01:Core PID:5860
12:47:16:WU00:FS01:FahCore 0xa3 started
12:47:17:WU00:FS01:0xa3:
12:47:17:WU00:FS01:0xa3:*------------------------------*
12:47:17:WU00:FS01:0xa3:Folding@Home Gromacs SMP Core
12:47:17:WU00:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
12:47:17:WU00:FS01:0xa3:
12:47:17:WU00:FS01:0xa3reparing to commence simulation
12:47:17:WU00:FS01:0xa3:- Looking at optimizations...
12:47:17:WU00:FS01:0xa3:- Created dyn
12:47:17:WU00:FS01:0xa3:- Files status OK
12:47:17:WU00:FS01:0xa3:- Expanded 3847831 -> 4375408 (decompressed 113.7 percent)
12:47:17:WU00:FS01:0xa3:Called DecompressByteArray: compressed_data_size=3847831 data_size=4375408, decompressed_data_size=4375408 diff=0
12:47:17:WU00:FS01:0xa3:- Digital signature verified
12:47:17:WU00:FS01:0xa3:
12:47:17:WU00:FS01:0xa3roject: 8579 (Run 0, Clone 8, Gen 33)
12:47:17:WU00:FS01:0xa3:
12:47:17:WU00:FS01:0xa3:Assembly optimizations on if available.
12:47:17:WU00:FS01:0xa3:Entering M.D.
12:47:23:WU00:FS01:0xa3:Mapping NT from 6 to 6
12:47:23:WU00:FS01:0xa3:Gromacs cannot continue further.
12:47:23:WU00:FS01:0xa3:Going to send back what have done -- stepsTotalG=0
12:47:23:WU00:FS01:0xa3:Work fraction=0.0000 steps=0.
12:47:27:WU00:FS01:0xa3:Warning: problem accessing logfile 00/wudata_01.log: file not found. status=-2
12:47:27:WU00:FS01:0xa3:logfile size=1048576 infoLength=0 edr=12817214 trr=23
12:47:27:WU00:FS01:0xa3:logfile size: 1048576 info=0 bed=12817214 hdr=23
12:47:27:WU00:FS01:0xa3:Warning: Core could not open logfile 00/wudata_01.log; steps completed=0.
12:47:27:WU00:FS01:0xa3:- Writing 1049112 bytes of core data to disk...
12:47:27:WU00:FS01:0xa3one: 1048600 -> 86 (compressed to 0.0 percent)
12:47:27:WU00:FS01:0xa3: ... Done.
12:47:27:WU00:FS01:0xa3:
12:47:27:WU00:FS01:0xa3:Folding@home Core Shutdown: UNSTABLE_MACHINE
12:47:27:WARNING:WU00:FS01:FahCore returned: UNSTABLE_MACHINE (122 = 0x7a)
12:47:27:WU00:FS01:Sending unit results: id:00 state:SEND error:FAULTY project:8579 run:0 clone:8 gen:33 core:0xa3 unit:0x000001590a3b1e59512260983a79aac1
12:47:27:WU00:FS01:Uploading 598B to 128.143.231.202
12:47:27:WU00:FS01:Connecting to 128.143.231.202:8080
12:47:28:WU00:FS01:Upload complete
12:47:28:WU00:FS01:Server responded WORK_ACK (400)
12:47:28:WU00:FS01:Cleaning up
12:47:28:WU01:FS01:Connecting to assign3.stanford.edu:8080
12:47:28:WU01:FS01:News: Welcome to Folding@Home
12:47:28:WU01:FS01:Assigned to work server 128.143.231.202
12:47:28:WU01:FS01:Requesting new work unit for slot 01: READY cpu:6 from 128.143.231.202
12:47:28:WU01:FS01:Connecting to 128.143.231.202:8080
12:47:30:WU01:FS01ownloading 3.67MiB
12:47:33:WU01:FS01ownload complete
12:47:33:WU01:FS01:Received Unit: id:01 stateOWNLOAD error:NO_ERROR project:8566 run:0 clone:4 gen:29 core:0xa3 unit:0x000001580a3b1e5951224c0e1e307937
12:47:33:WU01:FS01:Starting
12:47:33:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Marcus/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe -dir 01 -suffix 01 -version 703 -lifeline 3020 -checkpoint 3 -np 6
12:47:33:WU01:FS01:Started FahCore on PID 5168
12:47:33:WU01:FS01:Core PID:3792
12:47:33:WU01:FS01:FahCore 0xa3 started
12:47:34:WU01:FS01:0xa3:
12:47:34:WU01:FS01:0xa3:*------------------------------*
12:47:34:WU01:FS01:0xa3:Folding@Home Gromacs SMP Core
12:47:34:WU01:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
12:47:34:WU01:FS01:0xa3:
12:47:34:WU01:FS01:0xa3reparing to commence simulation
12:47:34:WU01:FS01:0xa3:- Looking at optimizations...
12:47:34:WU01:FS01:0xa3:- Created dyn
12:47:34:WU01:FS01:0xa3:- Files status OK
12:47:34:WU01:FS01:0xa3:- Expanded 3850491 -> 4392332 (decompressed 114.0 percent)
12:47:34:WU01:FS01:0xa3:Called DecompressByteArray: compressed_data_size=3850491 data_size=4392332, decompressed_data_size=4392332 diff=0
12:47:34:WU01:FS01:0xa3:- Digital signature verified
12:47:34:WU01:FS01:0xa3:
12:47:34:WU01:FS01:0xa3roject: 8566 (Run 0, Clone 4, Gen 29)
12:47:34:WU01:FS01:0xa3:
12:47:34:WU01:FS01:0xa3:Assembly optimizations on if available.
12:47:34:WU01:FS01:0xa3:Entering M.D.
12:47:40:WU01:FS01:0xa3:Mapping NT from 6 to 6
12:47:40:WU01:FS01:0xa3:Gromacs cannot continue further.
12:47:40:WU01:FS01:0xa3:Going to send back what have done -- stepsTotalG=0
12:47:40:WU01:FS01:0xa3:Work fraction=0.0000 steps=0.
12:47:44:WU01:FS01:0xa3:Warning: problem accessing logfile 01/wudata_01.log: file not found. status=-2
12:47:44:WU01:FS01:0xa3:logfile size=1048576 infoLength=0 edr=12817214 trr=23
12:47:44:WU01:FS01:0xa3:logfile size: 1048576 info=0 bed=12817214 hdr=23
12:47:44:WU01:FS01:0xa3:Warning: Core could not open logfile 01/wudata_01.log; steps completed=0.
12:47:44:WU01:FS01:0xa3:- Writing 1049112 bytes of core data to disk...
12:47:44:WU01:FS01:0xa3one: 1048600 -> 86 (compressed to 0.0 percent)
12:47:44:WU01:FS01:0xa3: ... Done.
12:47:44:WU01:FS01:0xa3:
12:47:44:WU01:FS01:0xa3:Folding@home Core Shutdown: UNSTABLE_MACHINE
12:47:45:WARNING:WU01:FS01:FahCore returned: UNSTABLE_MACHINE (122 = 0x7a)
12:47:45:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:8566 run:0 clone:4 gen:29 core:0xa3 unit:0x000001580a3b1e5951224c0e1e307937
12:47:45:WU01:FS01:Uploading 598B to 128.143.231.202
12:47:45:WU01:FS01:Connecting to 128.143.231.202:8080
12:47:45:WU00:FS01:Connecting to assign3.stanford.edu:8080
12:47:45:WU01:FS01:Upload complete
12:47:45:WU01:FS01:Server responded WORK_ACK (400)
12:47:45:WU01:FS01:Cleaning up
12:47:45:WU00:FS01:News: Welcome to Folding@Home
12:47:45:WU00:FS01:Assigned to work server 128.143.231.202
12:47:45:WU00:FS01:Requesting new work unit for slot 01: READY cpu:6 from 128.143.231.202
12:47:45:WU00:FS01:Connecting to 128.143.231.202:8080
12:47:47:WU00:FS01ownloading 3.64MiB
12:47:52:WU00:FS01ownload complete
12:47:52:WU00:FS01:Received Unit: id:00 stateOWNLOAD error:NO_ERROR project:6099 run:6 clone:64 gen:459 core:0xa3 unit:0x0000022d0a3b1e594e91e0a1a45101f5
12:47:52:WU00:FS01:Starting
12:47:52:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Marcus/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe -dir 00 -suffix 01 -version 703 -lifeline 3020 -checkpoint 3 -np 6
12:47:52:WU00:FS01:Started FahCore on PID 5484
12:47:52:WU00:FS01:Core PID:5380
12:47:52:WU00:FS01:FahCore 0xa3 started
12:47:52:WU00:FS01:0xa3:
12:47:52:WU00:FS01:0xa3:*------------------------------*
12:47:52:WU00:FS01:0xa3:Folding@Home Gromacs SMP Core
12:47:52:WU00:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
12:47:52:WU00:FS01:0xa3:
12:47:52:WU00:FS01:0xa3reparing to commence simulation
12:47:52:WU00:FS01:0xa3:- Looking at optimizations...
12:47:52:WU00:FS01:0xa3:- Created dyn
12:47:52:WU00:FS01:0xa3:- Files status OK
12:47:52:WU00:FS01:0xa3:- Expanded 3815849 -> 4169428 (decompressed 109.2 percent)
12:47:52:WU00:FS01:0xa3:Called DecompressByteArray: compressed_data_size=3815849 data_size=4169428, decompressed_data_size=4169428 diff=0
12:47:52:WU00:FS01:0xa3:- Digital signature verified
12:47:52:WU00:FS01:0xa3:
12:47:52:WU00:FS01:0xa3roject: 6099 (Run 6, Clone 64, Gen 459)
12:47:52:WU00:FS01:0xa3:
12:47:52:WU00:FS01:0xa3:Assembly optimizations on if available.
12:47:52:WU00:FS01:0xa3:Entering M.D.
12:47:58:WU00:FS01:0xa3:Mapping NT from 6 to 6
12:47:58:WU00:FS01:0xa3:Gromacs cannot continue further.
12:47:58:WU00:FS01:0xa3:Going to send back what have done -- stepsTotalG=0
12:47:58:WU00:FS01:0xa3:Work fraction=0.0000 steps=0.
12:48:02:WU00:FS01:0xa3:Warning: problem accessing logfile 00/wudata_01.log: file not found. status=-2
12:48:02:WU00:FS01:0xa3:logfile size=1048576 infoLength=0 edr=12817214 trr=23
12:48:02:WU00:FS01:0xa3:logfile size: 1048576 info=0 bed=12817214 hdr=23
12:48:02:WU00:FS01:0xa3:Warning: Core could not open logfile 00/wudata_01.log; steps completed=0.
12:48:02:WU00:FS01:0xa3:- Writing 1049112 bytes of core data to disk...
12:48:02:WU00:FS01:0xa3one: 1048600 -> 86 (compressed to 0.0 percent)
12:48:02:WU00:FS01:0xa3: ... Done.
12:48:02:WU00:FS01:0xa3:
12:48:02:WU00:FS01:0xa3:Folding@home Core Shutdown: UNSTABLE_MACHINE
12:48:03:WARNING:WU00:FS01:FahCore returned: UNSTABLE_MACHINE (122 = 0x7a)
12:48:03:WU00:FS01:Sending unit results: id:00 state:SEND error:FAULTY project:6099 run:6 clone:64 gen:459 core:0xa3 unit:0x0000022d0a3b1e594e91e0a1a45101f5
12:48:03:WU00:FS01:Uploading 598B to 128.143.231.202
12:48:03:WU00:FS01:Connecting to 128.143.231.202:8080
12:48:03:WU00:FS01:Upload complete
12:48:03:WU00:FS01:Server responded WORK_ACK (400)
12:48:03:WU00:FS01:Cleaning up
13:25:46:FS01:Finishing

 

[picar81_4711]

Da steht immer "UNSTABLE_MACHINE". Hast Du deinen PC übertaktet? Ab und zu hab ich auch die Meldung, aber so oft......da stimmt etwas nicht......

 

[moboKiller]

ja da is was gehörig im Argen ich mein mein A6-3670K läuft @3.3GHz von 2.7 und das mit 1.48VCore also das teil ghet selbst nach 72h(!) DAUER falten nicht aus und hat grad mal 46° also komisch it das schon:

Meine Maschinen übertreffen sich übrigens grade selbst 26k PPD meine Herren das läuft schon geil bald kommt dann auch noch der P4 630 und ein andrer P4 auf netBurst Basis zum falten dazu^^

 

[nfsgame]

bald kommt dann auch noch der P4 630 und ein andrer P4 auf netBurst Basis zum falten dazu^^

Lass es sein . Wenn ich beiden zusammen 750-800ppd bringen ist das viel. Deinen Einsatz in allen Ehren - aber man sollte auch die Effizienz im Auge behalten...

 

[wolf7]

ja da is was gehörig im Argen ich mein mein A6-3670K läuft @3.3GHz von 2.7 und das mit 1.48VCore also das teil ghet selbst nach 72h(!) DAUER falten nicht aus und hat grad mal 46° also komisch it das schon:

Meine Maschinen übertreffen sich übrigens grade selbst 26k PPD meine Herren das läuft schon geil bald kommt dann auch noch der P4 630 und ein andrer P4 auf netBurst Basis zum falten dazu^^

mh der wird ja als AMD Phenom(tm) II X6 1090T Processor erkannt. Kann das eig iwelche probleme machen? oder hast du zusätzlich wirklich noch son Prozessor mit am falten?