Rumpelkammer: PCGH Folding@Home-Thread II

[Fate T.H]

So, ich habe nun Angst vor GPU3!
Habe nen Stream nutzenden RSA-Key Kracking Programm eingeschaltet, Ergebnis:
GPU:71Grad
VRAM-Wandler:100Grad
Spawas:140Grad
Vom Stromverbrauch will ich gar nicht erst reden.

Handelt es sich da zufällig um RC5-72 ?

Deine Spawas werden aber mal verdammt heiß auf dauer sicher nicht gut.
Frage mich warum ATI dagegen nichts unternimmt da das Problem bekannt ist der hohen Temps
von deren Spawas seit der HD4xxx Serie und die 5er Serie auch nicht viel besser ist.
Die Stromaufnahme relativiert sich hier zumindest ggü. der NV-Karten da diese langsamer sind.


@Jever

Das kannste wohl laut sagen wobei meine HD5970 bzw. deren Spawas an die 80-90 Grad haben
unter Wasser wenn Furmark rennt. Kann aber auch daran liegen das die Wakü auf Silent getrimmt ist.

 

[nfsgame]

der SMP2 will mich ärgern. P6040 abgeliefert, P6041 bekommen. Wieder 1Tag 7 Studnen ackern . Naja für 7700Punkte gerne .

 

[mattinator]

@nfsgame

Du hast zu stark übertaktet, mit meinem Q9550@Stock hatte ich noch gar keine 604x-Projekte.

 

[nfsgame]

Wahrscheinlich . Aber das sagt uns doch das die normalen Big-WUs auch im Anmarsch sein könnten wenn die so schon "halbe"-Bigs für den Windows-SMP2 verteilen .

 

[Muschkote]

@mattinator
An der Übertaktung kann es nicht liegen, sonst hätte ich auch schon mal so ein schönes Projekt bekommen.

 

[trucker1963]

@mattinator
An der Übertaktung kann es nicht liegen, sonst hätte ich auch schon mal so ein schönes Projekt bekommen.

Stimmt,habe nicht übertaktet und schon ein paar in unregelmäßigen Abständen bekommen.

 

[mattinator]

Stanfords Wege sind unergründlich.

 

[Soldat0815]

Habe grad auch ne 6040er WU bekommen hab mich schon gewundert warum da steht das es etwas über 1 tag dauert bis ich auf die Punkte geschaut habe 7xxx Punkte

 

[Bumblebee]

6040er auf dem Ci7 920... < 11'500 Punkte

Ja, ja, die Kraft der 8 Herzen

 

[FloH 31]

Ich bekomme imo 15'757 PPD von meinem i7 geliefert.Allerdings hatte ich leider noch keine 6040er. :-/

Btw: Hab jetzt die 100 k geknackt, hört sich nach nicht viel an is aber nen Anfang wie ich finde.^^
Außerdem bin ich so unter Top 20 der 24h average Producer gerutscht

 

[mattinator]

6040er auf dem Ci7 920... < 11'500 Punkte

Ja, ja, die Kraft der 8 Herzen

Naja, sagen wir mal 4+4.

Hab jetzt die 100 k geknackt, hört sich nach nicht viel an is aber nen Anfang wie ich finde.^^
Außerdem bin ich so unter Top 20 der 24h average Producer gerutscht

Glückwunsch.

 

[Gast3737]

[..]
Außerdem bin ich so unter Top 20 der 24h average Producer gerutscht

bin sogar schon Platz 12
habe auch endlich eine Mille lass knacken!

 

[nfsgame]

Glückwunsch Rune und FloH 31

 

[Soldat0815]

6040er auf dem Ci7 920... < 11'500 Punkte

Ja, ja, die Kraft der 8 Herzen

Angeber Ich bin zufrieden damit

Ich bekomme imo 15'757 PPD von meinem i7 geliefert.Allerdings hatte ich leider noch keine 6040er. :-/

Btw: Hab jetzt die 100 k geknackt, hört sich nach nicht viel an is aber nen Anfang wie ich finde.^^
Außerdem bin ich so unter Top 20 der 24h average Producer gerutscht

100k sind viel erreich die mal mit ner 4850er dafür hab ich über 3monate gebraucht
Und jetzt mach ich mit meinem q9300 in einer woche mehr Punkte wie mit der 4850er im Monat
Echt traurig

 

[mattinator]

bin sogar schon Platz 12
habe auch endlich eine Mille lass knacken!

Auch Glückwunsch, Knack

 

[Bumblebee]

Grats an Rune und FloH 31

und - btw.

Ich bekomme imo 15'757 PPD von meinem i7 geliefert.Allerdings hatte ich leider noch keine 6040er. :-/

Kann ja noch kommen, und ja, natürlich kriege ich von anderen Projekten auch mehr Punkte

 

[klefreak]

hab ein massives problem..

hab seit heute in meiner VM (ubuntu10.4) nur errors:

--- Opening Log file [May 9 14:51:39 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/klefreak/fah
Executable: ./fah6
Arguments: -smp 4 -verbosity 9 -advmethods 

[14:51:39] - Ask before connecting: No
[14:51:40] - User name: klefreak_gletscherfloh (Team 70335)
[14:51:40] - User ID: ############
[14:51:40] - Machine ID: 1
[14:51:40] 
[14:51:40] Loaded queue successfully.
[14:51:40] 
[14:51:40] + Processing work unit
[14:51:40] Core required: FahCore_a3.exe
[14:51:40] Core found.
[14:51:40] - Autosending finished units... [May 9 14:51:40 UTC]
[14:51:40] Trying to send all finished work units
[14:51:40] + No unsent completed units remaining.
[14:51:40] - Autosend completed
[14:51:41] Working on queue slot 09 [May 9 14:51:41 UTC]
[14:51:41] + Working ...
[14:51:41] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 09 -np 4 -checkpoint 10 -verbose -lifeline 1833 -version 629'

[14:51:41] 
[14:51:41] *------------------------------*
[14:51:41] Folding@Home Gromacs SMP Core
[14:51:41] Version 2.19 (March 6, 2010)
[14:51:42] 
[14:51:42] Preparing to commence simulation
[14:51:42] - Ensuring status. Please wait.
[14:51:51] - Looking at optimizations...
[14:51:51] - Working with standard loops on this execution.
[14:51:51] - Previous termination of core was improper.
[14:51:51] - Files status OK
[14:51:53] - Expanded 1766743 -> 2254429 (decompressed 127.6 percent)
[14:51:53] Called DecompressByteArray: compressed_data_size=1766743 data_size=2254429, decompressed_data_size=2254429 diff=0
[14:51:53] - Digital signature verified
[14:51:54] 
[14:51:54] Project: 6062 (Run 0, Clone 32, Gen 14)
[14:51:54] 
[14:51:54] Entering M.D.
[14:52:02] Completed 0 out of 500000 steps  (0%)
[14:52:03] CoreStatus = 8B (139)
[14:52:03] Client-core communications error: ERROR 0x8b
[14:52:03] Deleting current work unit & continuing...
[14:52:13] Trying to send all finished work units
[14:52:13] + No unsent completed units remaining.
[14:52:13] - Preparing to get new work unit...
[14:52:13] Cleaning up work directory
[14:52:13] + Attempting to get work packet
[14:52:13] Passkey found
[14:52:13] - Will indicate memory of 800 MB
[14:52:13] - Connecting to assignment server
[14:52:13] Connecting to http://assign.stanford.edu:8080/
[14:52:29] Posted data.
[14:52:29] Initial: 40AB; - Successful: assigned to (171.64.65.54).
[14:52:29] + News From Folding@Home: Welcome to Folding@Home
[14:52:29] Loaded queue successfully.
[14:52:29] Connecting to http://171.64.65.54:8080/
[14:52:30] Posted data.
[14:52:30] Initial: 0000; - Receiving payload (expected size: 1767255)
[14:52:36] - Downloaded at ~287 kB/s
[14:52:36] - Averaged speed for that direction ~339 kB/s
[14:52:36] + Received work.
[14:52:36] + Closed connections
[14:52:41] 
[14:52:41] + Processing work unit
[14:52:41] Core required: FahCore_a3.exe
[14:52:41] Core found.
[14:52:41] Working on queue slot 00 [May 9 14:52:41 UTC]
[14:52:41] + Working ...
[14:52:41] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 00 -np 4 -checkpoint 10 -verbose -lifeline 1833 -version 629'

[14:52:41] 
[14:52:41] *------------------------------*
[14:52:41] Folding@Home Gromacs SMP Core
[14:52:41] Version 2.19 (March 6, 2010)
[14:52:41] 
[14:52:41] Preparing to commence simulation
[14:52:41] - Looking at optimizations...
[14:52:41] - Created dyn
[14:52:41] - Files status OK
[14:52:42] - Expanded 1766743 -> 2254429 (decompressed 127.6 percent)
[14:52:42] Called DecompressByteArray: compressed_data_size=1766743 data_size=2254429, decompressed_data_size=2254429 diff=0
[14:52:42] - Digital signature verified
[14:52:42] 
[14:52:42] Project: 6062 (Run 0, Clone 32, Gen 14)
[14:52:42] 
[14:52:42] Assembly optimizations on if available.
[14:52:42] Entering M.D.
[14:52:49] Completed 0 out of 500000 steps  (0%)
[14:52:49] CoreStatus = 8B (139)
[14:52:49] Client-core communications error: ERROR 0x8b
[14:52:49] Deleting current work unit & continuing...

.
.
.
.
.

--- Opening Log file [May 9 14:51:39 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/klefreak/fah
Executable: ./fah6
Arguments: -smp 4 -verbosity 9 -advmethods 

[14:51:39] - Ask before connecting: No
[14:51:40] - User name: klefreak_gletscherfloh (Team 70335)
[14:51:40] - User ID: ###########
[14:51:40] - Machine ID: 1
[14:51:40] 
[14:51:40] Loaded queue successfully.
[14:51:40] 
[14:51:40] + Processing work unit
[14:51:40] Core required: FahCore_a3.exe
[14:51:40] Core found.
[14:51:40] - Autosending finished units... [May 9 14:51:40 UTC]
[14:51:40] Trying to send all finished work units
[14:51:40] + No unsent completed units remaining.
[14:51:40] - Autosend completed
[14:51:41] Working on queue slot 09 [May 9 14:51:41 UTC]
[14:51:41] + Working ...
[14:51:41] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 09 -np 4 -checkpoint 10 -verbose -lifeline 1833 -version 629'

[14:51:41] 
[14:51:41] *------------------------------*
[14:51:41] Folding@Home Gromacs SMP Core
[14:51:41] Version 2.19 (March 6, 2010)
[14:51:42] 
[14:51:42] Preparing to commence simulation
[14:51:42] - Ensuring status. Please wait.
[14:51:51] - Looking at optimizations...
[14:51:51] - Working with standard loops on this execution.
[14:51:51] - Previous termination of core was improper.
[14:51:51] - Files status OK
[14:51:53] - Expanded 1766743 -> 2254429 (decompressed 127.6 percent)
[14:51:53] Called DecompressByteArray: compressed_data_size=1766743 data_size=2254429, decompressed_data_size=2254429 diff=0
[14:51:53] - Digital signature verified
[14:51:54] 
[14:51:54] Project: 6062 (Run 0, Clone 32, Gen 14)
[14:51:54] 
[14:51:54] Entering M.D.
[14:52:02] Completed 0 out of 500000 steps  (0%)
[14:52:03] CoreStatus = 8B (139)
[14:52:03] Client-core communications error: ERROR 0x8b
[14:52:03] Deleting current work unit & continuing...
[14:52:13] Trying to send all finished work units
[14:52:13] + No unsent completed units remaining.
[14:52:13] - Preparing to get new work unit...
[14:52:13] Cleaning up work directory
[14:52:13] + Attempting to get work packet
[14:52:13] Passkey found
[14:52:13] - Will indicate memory of 800 MB
[14:52:13] - Connecting to assignment server
[14:52:13] Connecting to http://assign.stanford.edu:8080/
[14:52:29] Posted data.
[14:52:29] Initial: 40AB; - Successful: assigned to (171.64.65.54).
[14:52:29] + News From Folding@Home: Welcome to Folding@Home
[14:52:29] Loaded queue successfully.
[14:52:29] Connecting to http://171.64.65.54:8080/
[14:52:30] Posted data.
[14:52:30] Initial: 0000; - Receiving payload (expected size: 1767255)
[14:52:36] - Downloaded at ~287 kB/s
[14:52:36] - Averaged speed for that direction ~339 kB/s
[14:52:36] + Received work.
[14:52:36] + Closed connections
[14:52:41] 
[14:52:41] + Processing work unit
[14:52:41] Core required: FahCore_a3.exe
[14:52:41] Core found.
[14:52:41] Working on queue slot 00 [May 9 14:52:41 UTC]
[14:52:41] + Working ...
[14:52:41] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 00 -np 4 -checkpoint 10 -verbose -lifeline 1833 -version 629'

[14:52:41] 
[14:52:41] *------------------------------*
[14:52:41] Folding@Home Gromacs SMP Core
[14:52:41] Version 2.19 (March 6, 2010)
[14:52:41] 
[14:52:41] Preparing to commence simulation
[14:52:41] - Looking at optimizations...
[14:52:41] - Created dyn
[14:52:41] - Files status OK
[14:52:42] - Expanded 1766743 -> 2254429 (decompressed 127.6 percent)
[14:52:42] Called DecompressByteArray: compressed_data_size=1766743 data_size=2254429, decompressed_data_size=2254429 diff=0
[14:52:42] - Digital signature verified
[14:52:42] 
[14:52:42] Project: 6062 (Run 0, Clone 32, Gen 14)
[14:52:42] 
[14:52:42] Assembly optimizations on if available.
[14:52:42] Entering M.D.
[14:52:49] Completed 0 out of 500000 steps  (0%)
[14:52:49] CoreStatus = 8B (139)
[14:52:49] Client-core communications error: ERROR 0x8b
[14:52:49] Deleting current work unit & continuing...


--- Opening Log file [May 9 14:57:11 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/klefreak/fah
Executable: ./fah6
Arguments: -smp 4 -verbosity 9 -advmethods 

[14:57:11] - Ask before connecting: No
[14:57:11] - User name: klefreak_gletscherfloh (Team 70335)
[14:57:11] - User ID: ######################
[14:57:11] - Machine ID: 1
[14:57:11] 
[14:57:11] Loaded queue successfully.
[14:57:12] 
[14:57:12] + Processing work unit
[14:57:12] Core required: FahCore_a3.exe
[14:57:12] Core not found.
[14:57:12] - Core is not present or corrupted.
[14:57:12] - Attempting to download new core...
[14:57:12] + Downloading new core: FahCore_a3.exe
[14:57:12] Downloading core (/~pande/Linux/AMD64/Core_a3.fah from www.stanford.edu)
[14:57:12] - Autosending finished units... [May 9 14:57:12 UTC]
[14:57:12] Trying to send all finished work units
[14:57:12] + No unsent completed units remaining.
[14:57:12] - Autosend completed
[14:57:28] Initial: AFDE; + 10240 bytes downloaded
.....
[14:57:37] Initial: 4F78; + 1896272 bytes downloaded
[14:57:37] Verifying core Core_a3.fah...
[14:57:37] Signature is VALID
[14:57:37] 
[14:57:37] Trying to unzip core FahCore_a3.exe
[14:57:38] Decompressed FahCore_a3.exe (4424968 bytes) successfully
[14:57:38] + Core successfully engaged
[14:57:43] 
[14:57:43] + Processing work unit
[14:57:43] Core required: FahCore_a3.exe
[14:57:43] Core found.
[14:57:43] Working on queue slot 00 [May 9 14:57:43 UTC]
[14:57:43] + Working ...
[14:57:43] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 00 -np 4 -checkpoint 10 -verbose -lifeline 1825 -version 629'

[14:57:43] 
[14:57:43] *------------------------------*
[14:57:43] Folding@Home Gromacs SMP Core
[14:57:43] Version 2.19 (March 6, 2010)
[14:57:43] 
[14:57:43] Preparing to commence simulation
[14:57:43] - Ensuring status. Please wait.
[14:57:53] - Looking at optimizations...
[14:57:53] - Working with standard loops on this execution.
[14:57:53] - Previous termination of core was improper.
[14:57:53] - Files status OK
[14:57:53] - Expanded 1766743 -> 2254429 (decompressed 127.6 percent)
[14:57:53] Called DecompressByteArray: compressed_data_size=1766743 data_size=2254429, decompressed_data_size=2254429 diff=0
[14:57:53] - Digital signature verified
[14:57:53] 
[14:57:53] Project: 6062 (Run 0, Clone 32, Gen 14)
[14:57:53] 
[14:57:53] Entering M.D.
[14:58:00] Completed 0 out of 500000 steps  (0%)
[14:58:00] CoreStatus = 8B (139)
[14:58:00] Client-core communications error: ERROR 0x8b
[14:58:00] Deleting current work unit & continuing...
[14:58:11] Trying to send all finished work units
[14:58:11] + No unsent completed units remaining.
[14:58:11] - Preparing to get new work unit...
[14:58:11] Cleaning up work directory
[14:58:11] + Attempting to get work packet
[14:58:11] Passkey found
[14:58:11] - Will indicate memory of 800 MB
[14:58:11] - Connecting to assignment server
[14:58:11] Connecting to http://assign.stanford.edu:8080/
[14:58:27] Posted data.
[14:58:27] Initial: 40AB; - Successful: assigned to (171.64.65.54).
[14:58:27] + News From Folding@Home: Welcome to Folding@Home
[14:58:27] Loaded queue successfully.
[14:58:27] Connecting to http://171.64.65.54:8080/
[14:58:28] Posted data.
[14:58:28] Initial: 0000; - Error: Bad packet type from server, expected work assignment
[14:58:28] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[14:58:37] + Attempting to get work packet
[14:58:37] Passkey found
[14:58:37] - Will indicate memory of 800 MB
[14:58:37] - Connecting to assignment server
[14:58:37] Connecting to http://assign.stanford.edu:8080/

aktueller log; vm einmal mit sm3 und danach wieder smp4 und dann wieder mit smp3 gestartet...

--- Opening Log file [May 9 16:30:54 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/klefreak/fah
Executable: ./fah6
Arguments: -smp 3 -verbosity 9 -advmethods 

[16:30:54] - Ask before connecting: No
[16:30:54] - User name: klefreak_gletscherfloh (Team 70335)
[16:30:54] - User ID: #####################
[16:30:54] - Machine ID: 1
[16:30:54] 
[16:30:54] Loaded queue successfully.
[16:30:54] 
[16:30:54] + Processing work unit
[16:30:54] Core required: FahCore_a3.exe
[16:30:54] Core found.
[16:30:54] - Autosending finished units... [May 9 16:30:54 UTC]
[16:30:54] Trying to send all finished work units
[16:30:54] + No unsent completed units remaining.
[16:30:54] - Autosend completed
[16:30:54] Working on queue slot 02 [May 9 16:30:54 UTC]
[16:30:54] + Working ...
[16:30:54] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 3 -checkpoint 10 -verbose -lifeline 2010 -version 629'

[16:30:54] 
[16:30:54] *------------------------------*
[16:30:54] Folding@Home Gromacs SMP Core
[16:30:54] Version 2.19 (March 6, 2010)
[16:30:54] 
[16:30:54] Preparing to commence simulation
[16:30:54] - Ensuring status. Please wait.
[16:31:04] - Looking at optimizations...
[16:31:04] - Working with standard loops on this execution.
[16:31:04] - Previous termination of core was improper.
[16:31:04] - Going to use standard loops.
[16:31:04] - Files status OK
[16:31:04] - Expanded 1798579 -> 2396877 (decompressed 133.2 percent)
[16:31:04] Called DecompressByteArray: compressed_data_size=1798579 data_size=2396877, decompressed_data_size=2396877 diff=0
[16:31:04] - Digital signature verified
[16:31:04] 
[16:31:04] Project: 6014 (Run 1, Clone 65, Gen 143)
[16:31:04] 
[16:31:04] Entering M.D.
[16:31:10] Using Gromacs checkpoints
[16:31:11] Resuming from checkpoint
[16:31:11] Verified work/wudata_02.log
[16:31:11] Verified work/wudata_02.trr
[16:31:11] Verified work/wudata_02.edr
[16:31:11] Completed 22692 out of 500000 steps  (4%)
[16:36:27] Completed 25000 out of 500000 steps  (5%)


--- Opening Log file [May 9 16:41:39 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/klefreak/fah
Executable: ./fah6
Arguments: -smp 4 -verbosity 9 -advmethods 

[16:41:39] - Ask before connecting: No
[16:41:39] - User name: klefreak_gletscherfloh (Team 70335)
[16:41:39] - User ID: ##############
[16:41:39] - Machine ID: 1
[16:41:39] 
[16:41:39] Loaded queue successfully.
[16:41:39] 
[16:41:39] - Autosending finished units... [May 9 16:41:39 UTC]
[16:41:39] + Processing work unit
[16:41:39] Trying to send all finished work units
[16:41:39] Core required: FahCore_a3.exe
[16:41:39] + No unsent completed units remaining.
[16:41:39] - Autosend completed
[16:41:39] Core found.
[16:41:39] Working on queue slot 02 [May 9 16:41:39 UTC]
[16:41:39] + Working ...
[16:41:39] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 4 -checkpoint 10 -verbose -lifeline 2057 -version 629'

[16:41:40] 
[16:41:40] *------------------------------*
[16:41:40] Folding@Home Gromacs SMP Core
[16:41:40] Version 2.19 (March 6, 2010)
[16:41:40] 
[16:41:40] Preparing to commence simulation
[16:41:40] - Ensuring status. Please wait.
[16:41:49] - Looking at optimizations...
[16:41:49] - Working with standard loops on this execution.
[16:41:49] - Previous termination of core was improper.
[16:41:49] - Going to use standard loops.
[16:41:49] - Files status OK
[16:41:50] - Expanded 1798579 -> 2396877 (decompressed 133.2 percent)
[16:41:50] Called DecompressByteArray: compressed_data_size=1798579 data_size=2396877, decompressed_data_size=2396877 diff=0
[16:41:50] - Digital signature verified
[16:41:50] 
[16:41:50] Project: 6014 (Run 1, Clone 65, Gen 143)
[16:41:50] 
[16:41:50] Entering M.D.
[16:41:56] Using Gromacs checkpoints
[16:41:56] Resuming from checkpoint
[16:41:56] Verified work/wudata_02.log
[16:41:56] Verified work/wudata_02.trr
[16:41:56] Verified work/wudata_02.edr
[16:41:57] Completed 27012 out of 500000 steps  (5%)
[16:51:19] Completed 30000 out of 500000 steps  (6%)
[17:08:34] Completed 35000 out of 500000 steps  (7%)
[17:24:49] Completed 40000 out of 500000 steps  (8%)
[17:41:46] Completed 45000 out of 500000 steps  (9%)
[17:57:46] Completed 50000 out of 500000 steps  (10%)
[18:14:44] Completed 55000 out of 500000 steps  (11%)
[18:29:39] Completed 60000 out of 500000 steps  (12%)
[18:43:02] Completed 65000 out of 500000 steps  (13%)
[18:56:32] Completed 70000 out of 500000 steps  (14%)
[19:11:17] Completed 75000 out of 500000 steps  (15%)
[19:27:13] Completed 80000 out of 500000 steps  (16%)
[19:42:08] Completed 85000 out of 500000 steps  (17%)
[19:56:14] Completed 90000 out of 500000 steps  (18%)
[20:11:23] Completed 95000 out of 500000 steps  (19%)
[20:26:42] Completed 100000 out of 500000 steps  (20%)
[20:39:57] Completed 105000 out of 500000 steps  (21%)


--- Opening Log file [May 9 20:49:29 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/klefreak/fah
Executable: ./fah6
Arguments: -smp 3 -verbosity 9 -advmethods 

[20:49:29] - Ask before connecting: No
[20:49:29] - User name: klefreak_gletscherfloh (Team 70335)
[20:49:29] - User ID: #############
[20:49:29] - Machine ID: 1
[20:49:29] 
[20:49:29] Loaded queue successfully.
[20:49:29] 
[20:49:29] + Processing work unit
[20:49:29] Core required: FahCore_a3.exe
[20:49:29] Core found.
[20:49:29] - Autosending finished units... [May 9 20:49:29 UTC]
[20:49:29] Trying to send all finished work units
[20:49:29] + No unsent completed units remaining.
[20:49:29] - Autosend completed
[20:49:29] Working on queue slot 02 [May 9 20:49:29 UTC]
[20:49:29] + Working ...
[20:49:29] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 3 -checkpoint 10 -verbose -lifeline 2560 -version 629'

[20:49:29] 
[20:49:29] *------------------------------*
[20:49:29] Folding@Home Gromacs SMP Core
[20:49:29] Version 2.19 (March 6, 2010)
[20:49:29] 
[20:49:29] Preparing to commence simulation
[20:49:29] - Ensuring status. Please wait.
[20:49:39] - Looking at optimizations...
[20:49:39] - Working with standard loops on this execution.
[20:49:39] - Previous termination of core was improper.
[20:49:39] - Going to use standard loops.
[20:49:39] - Files status OK
[20:49:39] - Expanded 1798579 -> 2396877 (decompressed 133.2 percent)
[20:49:39] Called DecompressByteArray: compressed_data_size=1798579 data_size=2396877, decompressed_data_size=2396877 diff=0
[20:49:39] - Digital signature verified
[20:49:39] 
[20:49:39] Project: 6014 (Run 1, Clone 65, Gen 143)
[20:49:39] 
[20:49:39] Entering M.D.
[20:49:45] Using Gromacs checkpoints
[20:49:46] Resuming from checkpoint
[20:49:46] Verified work/wudata_02.log
[20:49:46] Verified work/wudata_02.trr
[20:49:46] Verified work/wudata_02.edr
[20:49:46] Completed 105762 out of 500000 steps  (21%)
[21:00:02] Completed 110000 out of 500000 steps  (22%)
[21:12:20] Completed 115000 out of 500000 steps  (23%)

und habe testweise auch schon folgendes probiert:
den neuen Core A3 2.19 + workordner geloscht --> keine Beserung
-advmethods entfernt: brachte funktionierende WU's jedoch läuft nun alles sehr langsam ab: ca 15' anstelle von 4' pro % !!
hba danach testweise smp4 auf smp3 geändert, jedoch hat das nur kurzfristig geholfen.. ;(
-----------------------------
hab acuh im foldingforum gepostet, jedoch derzeit dazu noch kieen antwort erhalten..

System: Ubuntu 10.4 in ner quadvm Q9550@3,4ghz 800mb ram in der vm.. workstation 7.1
funktionierte bis heute morgen einwandfrei..

mfg klemens

 

[mattinator]

Habe folgendes in den Info's zu den CoreStati gefunden (s. CoreStatus codes - FaHWiki, Status 8B gab es dort nicht):

CoreStatus = 89 (137)
Client-core communications error: ERROR 0x89
Deleting current work unit & continuing...
Triggered by the OS, probably due to insufficient memory

Sieh Dir in der VM mal den Zustand der System-Resourcen (Hauptspeicher, Festplatte) an, z.B. mit df und top. Evtl. ist die virtuelle Festplatte voll oder der der virt. Speicher ausgelastet.

 

[nfsgame]

Mit dem aktuellen Ubuntu verweigert der SMP auf meinem Lap auch den Dienst . er holt sich jedoch gar nicht erst ne WU.

 

[Soldat0815]

Boa kotz gestern hab gestern mein PC bissl weiter übertaktetund die 6040er WU wurde heut nacht wegen unstable Sys oder wie das heist abgebrochen und das im letzten 1/5el war schon über 80%
Was mich aufregt es lief gestern von Mittag bis nachts 12Uhr perfekt und wie ich heut früh aufstand war er im Anmeldbildschirm da und beim Starten von F@H sah ich die kacke
Also mehr als 3,3Ghz läuft nicht Stabil da macht die CPU dicht