Muss mal n Update nachschieben. Des mit den unregelmäßigen Freezes ist geblieben.
Jetzt weis ich auch net. 1 Std Prime jeweils mit und ohne AVX laufen ohne Fehler und den Linpack Bench mit 20 Runs packt er auch ohne Fehler....
Dann dürfte es doch nicht am CPU hängen ? (Gab ja ne News mit Fehlern bei RTX Karten und G-Sync.) Jetzt weis ich auch nicht.
Sowohl in Black Ops 4 als auch in PUBG gibts dann den Fehler das des Bild stehen Bleibt ich den Ton aber noch ne weile höre. Dann öffnet sich der PUBG Absturzmelder....
Ist das dem OC geschuldet ?
Ihr habt mir ja zu ner Fixen VCore geraten und auch gut erklärt das es 50/50 ist ob mehr VCore+Weniger LLC oder weniger VCore und mehr LLC. (Schon mal vielen Dank - auch der Hinweis mit dem Sweetspot)
Die VCCIO und Systemagentvoltage müsste ich doch bei 3200er Ram auf @Stock lassen können ? (Ist das vielleicht die Stellschraube für die Hänger beim Zocken ?)
Zusatzfragen:
Wenn ich echt zu viel Zeit hätte und die maximale Stromeinsparung haben wollte, dann müsste ich den ganzen OC Schmarn über Offset / Adaptive regeln ja ?
The Kaby Lake overclocking guide | ROG - Republic of Gamers Global
Mein Englisch ist zwar ok aber des verwirrt mich trotzdem:
Manual Mode: Allows setting of a single value for Vcore that is applied across all Core ratios, irrespective of application load.
- soweit klar wie besprochen
Offset Mode: In Offset Mode, we can add or subtract voltage from the CPU’s default voltage for a given CPU core ratio. The default voltage scales according to the active multiplier ratio. This provides power saving when application loading is light. The side effect to using offset mode is that any offset value we select will be applied to all core ratios. This can result in too much or too little voltage being applied for a given ratio, which leads to instability.
If you wish to use Offset Mode, then bear in mind that the Vcore displayed in the UEFI is simply a snapshot of the offset voltage stack; the firmware interface only places a partial load on the CPU. The full-load voltage in the operating system will be different, so you will need to check the voltage by running a suitable application within the OS. Use Ai Suite to monitor the voltage when the system is under full load. Also, bear in mind that the default voltage receiving the offset changes with the applied CPU ratio.
Adaptive Mode: Adaptive Mode was developed to account for the inadequacies of Offset Mode for overclocking. We use it to specify the voltage used when the CPU is faced with a heavy application load. The voltage we set is the maximum voltage the PCU is allowed to apply, which takes all the load-related guesswork hampering Offset Mode out of the equation. The other boon of Adaptive Mode is that it does not alter voltages for non-Turbo CPU ratios, allowing us to enjoy the benefits of power saving without the voltage adjustment range issues presented by the Offset Mode function. We recommend Adaptive Mode for all normal overclocking.
To use Adaptive Mode, simply enter the full load voltage you wish to use in the Additional Turbo Mode CPU Core Voltage box. So, if you wish to set 1.20V for full load, just type 1.20 into the box. The target full-load voltage is shown in the Total Adaptive Mode CPU Core Voltage area.