[Sammelthread] Der Serverwahn

picar81_4711 · 1. März 2014

@A.Meier-PS3 CoreStatus = 8B (139) habe ich auch immer gehabt, als ich damals die Probleme mit meinem Server hatte. Bei mir waren es ein defekter Speicher, den ich fast nicht entdeckte(mal defekt, mal wieder nicht).
Auslöser bei mir war ein durchgeschmortes Kabel....
Aber auch bei meinem X5690 bekam ich diese Meldung, als er noch nicht stabil lief(OC). Hast du noch OC drinnen? Mein 2687W lief bei 104MHZ FSB einwandfrei..... :daumen:

A.Meier-PS3 · 1. März 2014

@picar81_4711:
Ja, hab OC noch drinn (105MHz FSB).

Hab gestern mal alles geupdatet und neu gestartet > wenn die Probleme wiederkommen werde ich mal die RAM's durchtesten.
Falls einer der RAM-Riegel faul sein sollte hätte ich noch einen Satz rumliegen.

A.Meier-PS3 · 30. März 2014

Sind momentan faule P8102 im Umlauf? :huh:

Mein Server hat sich ne P8102 (0/1/577) geholt und hat damit stundenlang "FILE_IO_ERROR Core-Status: 75(117)" produziert weil er ständig die Gleiche wieder bekommen hat. :wall:

Nach Neustart des Servers plus nochmal Neustart des Clienten hat er endlich ne P8578 bekommen > zwar keine BigWU aber er faltet wenigstens wieder.

Bumblebee · 30. März 2014

A.Meier-PS3 schrieb:
Sind momentan faule P8102 im Umlauf?

Bisher ist mir nicht aufgefallen

A.Meier-PS3 · 30. März 2014

Das Problem mit der genau gleichen P8102 ist wieder da: :heul:

Nachdem er die P8578 fertig gefaltet hatte, bekommt er wieder diese P8102 und produziert wieder "FILE_IO_ERROR Core-Status: 75 (117)" am Stück. :wall:

Jemand ne schlaue Idee wie ich verhindern kann das er sich immer diese eine P8102 holt? :huh:

Edit:
Jetzt faltet er wieder (P8105) nach unzähligen Neustarts des Clienten > hab die MaschinID auf 2 geändert.

wolf7 · 31. März 2014

ist es punktemäßig eig immer noch besser mit ner VM + Ubuntu 10.10 und dem 6.34 Client zu falten, als mit dem aktuellen V7er und windows 7? (cpu folding versteht sich)

edit: wieso hab ich das in diesen Thread geschrieben? kann das nen Mod vllt in den Quatsch Thread kopieren? löschen scheint ja net zu gehen... Danke.

A.Meier-PS3 · 2. April 2014

Jetzt ist es schon wieder passiert nachdem 5 WU fehlerlos gefaltet wurden:
Dieses mal mit einer P8105 (0/42/345)

Hier der Eintrag aus der Log der sich ständig wiederholt:

[18:12:03]
[18:12:03] *------------------------------*
[18:12:03] Folding@Home Gromacs SMP Core
[18:12:03] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[18:12:03]
[18:12:03] Preparing to commence simulation
[18:12:03] - Looking at optimizations...
[18:12:03] - Created dyn
[18:12:03] - Files status OK
[18:12:03] Couldn't Decompress
[18:12:03] Called DecompressByteArray: compressed_data_size=0 data_size=0, decompressed_data_size=0 diff=0
[18:12:03] -Error: Couldn't update checksum variables
[18:12:03] Error: Could not open work file
[18:12:03]
[18:12:03] Folding@home Core Shutdown: FILE_IO_ERROR
[18:12:04] CoreStatus = 75 (117)
[18:12:04] Error opening or reading from a file.
[18:12:04] Deleting current work unit & continuing...
[18:12:04] Trying to send all finished work units
[18:12:04] + No unsent completed units remaining.
[18:12:04] - Preparing to get new work unit...
[18:12:04] Cleaning up work directory
[18:12:04] + Attempting to get work packet
[18:12:04] Passkey found
[18:12:04] - Will indicate memory of 7968 MB
[18:12:04] - Connecting to assignment server
[18:12:04] Connecting to http://assign.stanford.edu:8080/
[18:12:05] Posted data.
[18:12:05] Initial: 8F80; - Successful: assigned to (128.143.231.201).
[18:12:05] + News From Folding@Home: Welcome to Folding@Home
[18:12:05] Loaded queue successfully.
[18:12:05] Sent data
[18:12:05] Connecting to http://128.143.231.201:8080/
[18:12:05] Posted data.
[18:12:05] Initial: 0000; - Receiving payload (expected size: 512)
[18:12:05] Conversation time very short, giving reduced weight in bandwidth avg
[18:12:05] - Downloaded at ~1 kB/s
[18:12:05] - Averaged speed for that direction ~1 kB/s
[18:12:05] + Received work.
[18:12:05] + Closed connections
[18:12:10]
[18:12:10] + Processing work unit
[18:12:10] Core required: FahCore_a5.exe
[18:12:10] Core found.
[18:12:10] Working on queue slot 03 [April 2 18:12:10 UTC]
[18:12:10] + Working ...
[18:12:10] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 03 -np 32 -priority 96 -checkpoint 3 -verbose -lifeline 4763 -version 634'

Vorschläge?

Edit:
Hab jetzt mal einen RAM-Test gestartet, glaube zwar nicht das es daran liegt.

picar81_4711 · 3. April 2014

A.Meier-PS3 schrieb:
Jetzt ist es schon wieder passiert nachdem 5 WU fehlerlos gefaltet wurden:
Dieses mal mit einer P8105 (0/42/345)

Hier der Eintrag aus der Log der sich ständig wiederholt:

[18:12:03]
[18:12:03] *------------------------------*
[18:12:03] Folding@Home Gromacs SMP Core
[18:12:03] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[18:12:03]
[18:12:03] Preparing to commence simulation
[18:12:03] - Looking at optimizations...
[18:12:03] - Created dyn
[18:12:03] - Files status OK
[18:12:03] Couldn't Decompress
[18:12:03] Called DecompressByteArray: compressed_data_size=0 data_size=0, decompressed_data_size=0 diff=0
[18:12:03] -Error: Couldn't update checksum variables
[18:12:03] Error: Could not open work file
[18:12:03]
[18:12:03] Folding@home Core Shutdown: FILE_IO_ERROR
[18:12:04] CoreStatus = 75 (117)
[18:12:04] Error opening or reading from a file.
[18:12:04] Deleting current work unit & continuing...
[18:12:04] Trying to send all finished work units
[18:12:04] + No unsent completed units remaining.
[18:12:04] - Preparing to get new work unit...
[18:12:04] Cleaning up work directory
[18:12:04] + Attempting to get work packet
[18:12:04] Passkey found
[18:12:04] - Will indicate memory of 7968 MB
[18:12:04] - Connecting to assignment server
[18:12:04] Connecting to http://assign.stanford.edu:8080/
[18:12:05] Posted data.
[18:12:05] Initial: 8F80; - Successful: assigned to (128.143.231.201).
[18:12:05] + News From Folding@Home: Welcome to Folding@Home
[18:12:05] Loaded queue successfully.
[18:12:05] Sent data
[18:12:05] Connecting to http://128.143.231.201:8080/
[18:12:05] Posted data.
[18:12:05] Initial: 0000; - Receiving payload (expected size: 512)
[18:12:05] Conversation time very short, giving reduced weight in bandwidth avg
[18:12:05] - Downloaded at ~1 kB/s
[18:12:05] - Averaged speed for that direction ~1 kB/s
[18:12:05] + Received work.
[18:12:05] + Closed connections
[18:12:10]
[18:12:10] + Processing work unit
[18:12:10] Core required: FahCore_a5.exe
[18:12:10] Core found.
[18:12:10] Working on queue slot 03 [April 2 18:12:10 UTC]
[18:12:10] + Working ...
[18:12:10] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 03 -np 32 -priority 96 -checkpoint 3 -verbose -lifeline 4763 -version 634'

Vorschläge?

Edit:
Hab jetzt mal einen RAM-Test gestartet, glaube zwar nicht das es daran liegt.

Ich würde einen Hardwarefehler leider nicht ausschließen.

Zitat: These errors indicate an I/O hardware problem or perhaps an AV program preventing FAH from writing/reading certain work files.

Ich werde jetzt mal für eine begrenzte Zeit meine(n) Server die nächsten Tage anschmeissen. Damit sie nicht einrosten.......hoffe, das sie auch für einen sinnvollen Zweck verwendet werden. Bin ja momentan nicht so begeistert von Stanford.....leider......

mattinator · 4. April 2014

@A.Meier-PS3
Schau mal in's dmesg und /var/log/syslog. Festplatten- oder RAID-Fehler sollten dort zu sehen sein.

A.Meier-PS3 · 4. April 2014

mattinator schrieb:
@A.Meier-PS3
Schau mal in's dmesg und /var/log/syslog. Festplatten- oder RAID-Fehler sollten dort zu sehen sein.

Wenn ich es richtig verstehe, sind keine Festplattenfehler vorhanden, nur in der syslog sind ein paar Sensorfehler drin:

dmesg:

[ 5.068857] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[ 5.068960] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.069345] ata2.00: ATA-8: Hitachi HTS543216A7A384, ES1OA70F, max UDMA/133
[ 5.069458] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.069662] ata1.00: configured for UDMA/133
[ 5.069884] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
[ 5.069946] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.069947] EDD information not available.
[ 5.070443] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.070455] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 5.070539] ata2.00: configured for UDMA/133
[ 5.070856] sd 0:0:0:0: [sda] Write Protect is off
[ 5.070958] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.071135] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.071245] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54321 ES1O PQ: 0 ANSI: 5
[ 5.071384] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 5.071413] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.071414] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.071424] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.071481] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 5.074358] sda: sda1
[ 5.074763] ata3.00: ATA-8: WDC WD20EURS-63S48Y0, 51.0AB51, max UDMA/133
[ 5.074868] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.075303] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.081849] ata3.00: configured for UDMA/133
[ 5.082054] scsi 2:0:0:0: Direct-Access ATA WDC WD20EURS-63S 51.0 PQ: 0 ANSI: 5
[ 5.082426] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 5.082434] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 5.082438] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 5.082534] sd 2:0:0:0: [sdc] Write Protect is off
[ 5.082536] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.082553] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.096068] sdc: sdc1
[ 5.096073] ata7: SATA link down (SStatus 0 SControl 300)
[ 5.096110] ata13: SATA link down (SStatus 0 SControl 300)
[ 5.096142] ata11: SATA link down (SStatus 0 SControl 300)
[ 5.096196] ata9: SATA link down (SStatus 0 SControl 300)
[ 5.096230] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.096276] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.096337] ata10: SATA link down (SStatus 0 SControl 300)
[ 5.096404] ata12: SATA link down (SStatus 0 SControl 300)
[ 5.097018] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 5.097381] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 5.097427] ata14.00: configured for UDMA/66
[ 5.104657] scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5

syslog:

SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:07:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]
Apr 4 19:07:08 Z9PE-D8 sensord: Chip: nct6776-isa-0290
Apr 4 19:07:08 Z9PE-D8 sensord: Adapter: ISA adapter
Apr 4 19:07:08 Z9PE-D8 sensord: Vcore: +0.00 V (min = +0.00 V, max = +1.74 V)
Apr 4 19:07:08 Z9PE-D8 sensord: in1: +0.19 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:07:08 Z9PE-D8 sensord: AVCC: +3.26 V (min = +2.98 V, max = +3.63 V)
Apr 4 19:07:08 Z9PE-D8 sensord: +3.3V: +3.26 V (min = +2.98 V, max = +3.63 V)
Apr 4 19:07:08 Z9PE-D8 sensord: in4: +0.82 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:07:08 Z9PE-D8 sensord: in5: +2.04 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:07:08 Z9PE-D8 sensord: 3VSB: +3.31 V (min = +2.98 V, max = +3.63 V)
Apr 4 19:07:08 Z9PE-D8 sensord: Vbat: +3.28 V (min = +2.70 V, max = +3.30 V)
Apr 4 19:07:08 Z9PE-D8 sensord: fan1: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:07:08 Z9PE-D8 sensord: fan2: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:07:08 Z9PE-D8 sensord: fan3: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:07:08 Z9PE-D8 sensord: SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:07:08 Z9PE-D8 sensord: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]
Apr 4 19:07:08 Z9PE-D8 sensord: AUXTIN: 41.0 C (limit = 80.0 C, hysteresis = 75.0 C)
Apr 4 19:07:08 Z9PE-D8 sensord: cpu0_vid: +1.708 V
Apr 4 19:07:08 Z9PE-D8 sensord: Chip: coretemp-isa-0000
Apr 4 19:07:08 Z9PE-D8 sensord: Adapter: ISA adapter
Apr 4 19:07:08 Z9PE-D8 sensord: Physical id 0: 55.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 0: 52.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 1: 51.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 2: 38.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 3: 43.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 4: 55.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 5: 49.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 6: 46.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 7: 45.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Chip: coretemp-isa-0001
Apr 4 19:07:08 Z9PE-D8 sensord: Adapter: ISA adapter
Apr 4 19:07:08 Z9PE-D8 sensord: Physical id 1: 54.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 0: 54.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 1: 46.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 2: 52.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 3: 54.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 4: 45.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 5: 50.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 6: 52.0 C
Apr 4 19:07:08 Z9PE-D8 sensord: Core 7: 47.0 C
Apr 4 19:08:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in1: +0.19 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:08:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in4: +0.82 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:08:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in5: +2.04 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:08:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan1: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:08:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan2: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:08:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan3: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:08:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:08:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]
Apr 4 19:09:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in1: +0.19 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:09:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in4: +0.82 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:09:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in5: +2.04 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:09:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan1: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:09:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan2: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:09:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan3: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:09:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:09:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]
Apr 4 19:10:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in1: +0.19 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:10:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in4: +0.82 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:10:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in5: +2.04 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:10:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan1: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:10:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan2: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:10:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan3: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:10:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:10:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]
Apr 4 19:11:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in1: +0.19 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:11:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in4: +0.82 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:11:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in5: +2.04 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:11:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan1: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:11:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan2: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:11:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan3: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:11:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:11:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]
Apr 4 19:12:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in1: +0.19 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:12:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in4: +0.82 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:12:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in5: +2.04 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:12:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan1: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:12:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan2: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:12:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan3: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:12:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:12:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]
Apr 4 19:13:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in1: +0.19 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:13:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in4: +0.82 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:13:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in5: +2.04 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:13:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan1: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:13:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan2: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:13:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan3: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:13:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:13:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]
Apr 4 19:14:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in1: +0.19 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:14:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in4: +0.82 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:14:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in5: +2.04 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:14:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan1: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:14:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan2: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:14:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan3: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:14:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:14:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]
Apr 4 19:15:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in1: +0.19 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:15:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in4: +0.82 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:15:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in5: +2.04 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:15:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan1: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:15:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan2: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:15:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan3: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:15:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:15:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]
Apr 4 19:16:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in1: +0.19 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:16:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in4: +0.82 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:16:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in5: +2.04 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:16:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan1: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:16:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan2: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:16:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan3: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:16:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:16:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]
Apr 4 19:17:01 Z9PE-D8 CRON[4674]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Apr 4 19:17:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in1: +0.19 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:17:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in4: +0.82 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:17:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: in5: +2.04 V (min = +0.00 V, max = +0.00 V) [ALARM]
Apr 4 19:17:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan1: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:17:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan2: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:17:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: fan3: 0 RPM (min = 0 RPM) [ALARM]
Apr 4 19:17:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: SYSTIN: 41.0 C (limit = 0.0 C, hysteresis = 0.0 C) [ALARM]
Apr 4 19:17:08 Z9PE-D8 sensord: Sensor alarm: Chip nct6776-isa-0290: CPUTIN: 123.5 C (limit = 80.0 C, hysteresis = 75.0 C) [ALARM]

Vielleicht seht ihr ja was, was ich aus Unwissenheit übersehe.

mattinator · 4. April 2014

Den sensord würde ich deaktivieren oder so konfigurieren, dass die Sensoren ohne vernüftige Werte keinen Alarm auslösen. Bremst nur das System. Die "SATA link down"-Meldungen sollten jedoch maximal beim Systemstart erzeugt werden, ansonsten gibt es vllt. ein Problem mit den Kabeln.

picar81_4711 · 18. April 2014

Hab gestern mal den NACL auf meinem 2xX5690 ausprobiert, wie zu erwarten sehr schlecht. Der NACL ist für kleinere CPUs mit weniger Kernen ausgelegt. Zu beachten ist allerdings, dass alle 24 Kerne ausgelastet(100%) wurden, er aber trotzdem keine Bäume ausgerissen hat....

Dabei war nicht der häufige Up- und Download das Problem, sondern die Projekte wurden auch nicht recht viel schneller fertiggestellt als bei kleineren CPUs .....

A.Meier-PS3 · 18. April 2014

Letzte Woche haben wir meinen Server vom V6 auf dem V 7.3.6 umgestellt und seit da fast nur noch P8101.

Habt ihr auch so viele oder hab ich momentan einfach sehr viel Pech bei der Projektvergabe?

Bumblebee · 18. April 2014

Meine laufen immer noch auf V6 - und gemischte Projekte

picar81_4711 · 18. April 2014

Bumblebee schrieb:
Meine laufen immer noch auf V6 - und gemischte Projekte

Ja, meine laufen auch mit V6 :daumen:

Bin voll zufrieden!

picar81_4711 · 26. April 2014

Bin für 4 Tage im Urlaub in Südtirol. Danach bin ich wieder da......mein Server auch :daumen:

Bumblebee · 26. April 2014

picar81_4711 schrieb:
Bin für 4 Tage im Urlaub in Südtirol. Danach bin ich wieder da......mein Server auch

Schönen Urlaub - und danke für deinen Server

picar81_4711 · 26. April 2014

Bumblebee schrieb:
Schönen Urlaub - und danke für deinen Server

Der Server ist zu schade, um im Keller zu stehen und nichts zu tun :daumen:

.......und zu geizig darf man bei den Stromkosten auch nicht werden. (haben eh Landwirtschaftstarif

)

A.Meier-PS3 · 27. April 2014

Ich war jetzt auch drei Tage weg (BMW K Treffen bei Wunderlich in Sinzig), aber mein Server lief durch. :schief:

Abductee · 27. April 2014

Den hattest du ja auch im Topcase :ugly:

[Sammelthread] Der Serverwahn

Software-Overclocker(in)

Lötkolbengott/-göttin

Lötkolbengott/-göttin

F@H-Team-Member & F@H-Moderator

Lötkolbengott/-göttin

Software-Overclocker(in)

Lötkolbengott/-göttin

Software-Overclocker(in)

Volt-Modder(in)

Lötkolbengott/-göttin

Volt-Modder(in)

Software-Overclocker(in)

Lötkolbengott/-göttin

F@H-Team-Member & F@H-Moderator

Software-Overclocker(in)

Software-Overclocker(in)

F@H-Team-Member & F@H-Moderator

Software-Overclocker(in)

Lötkolbengott/-göttin

PCGH-Community-Veteran(in)

Ähnliche Themen