PWM-Lüfter keine Regelung

Spayokel

Kabelverknoter(in)
PWM-Lüfter keine Regelung

Hi,

habe mir einen shuttle-Pc zusammen gebaut.
Leider funktioniert die PWM-Regelung scheinbar nicht.
Intel Boxlüfter läuft immer bei 2200U/min ca. .
Habe im Bios schon zig Einstellungen ausprobiert aber kein Erfolg.

MOBO: GA -g33M-DSR2/S2
CPU : E6750

kein OC alles auf Auto

Habt ihr Rat??

Gruss

Spayokel
 
AW: PWM-Lüfter keine Regelung

Ist es dieses??

GA-G33M-DS2R - GIGABYTE - Support - Mainboard - Benutzerhandbuch

Auszug aus dem Handbuch

Smart FAN Control Method (Note)
Specifies how to control CPU fan speed.
Auto Lets BIOS control CPU fan speed. (Default)
Intel(R) QST Allows CPU fan speed to be controlled by the Intel Quiet System Technology
(QST). This feature requires the installation of Intel Host Embedded Control
Interface (HECI) driver from the motherboard driver disk.
Legacy Allows CPU fan to run at different speed according to the CPU temperature.
Disabled Forces CPU fan to run at full speed.
Smart FAN Control Mode
Specifies how to control CPU fan speed. This item is configurable only if CPU Smart FAN
Control is set to Enabled.
Auto Lets BIOS autodetect the type of CPU fan installed and sets the optimal CPU
fan control mode. (Default)
Voltage Sets Voltage mode for a 3-pin CPU fan.
PWM Sets PWM mode for a 4-pin CPU fan.
Note: The Voltage mode can be set for a 3-pin CPU fan or a 4-pin CPU fan. However, for a 4-pin
CPU fan that is not designed following Intel PWM fan specifications, selecting PWM mode may not
effectively reduce the fan speed.

MfG darkycold
 
AW: PWM-Lüfter keine Regelung

Hallo,

jepp das sollte es sein, allerdings steht noch ein /2 dahinter.

Also wenn ich das richtig verstehe muss ich noch Intel Quiet System Technology installieren.

Ich habe im Bios nur 2 Möglichkeit etwas einzustelle.

Unter PChealth

Smartfan control Method -- legacy oder Auto oder disable
Smartfan control Mode -- Auto, PWM oder Voltage

Bei diesen Einstellungen habe ich es schon in alle Variationen ausprobiert.

Gruss
 
AW: PWM-Lüfter keine Regelung

Ist dein Lüfter wiklich ein PWM????

Wenn nicht, dann musst du im Bios auf Volt umstellen.
Dann bei Method auf Auto!

Damit muss es klappen..
 
Zurück