Robär
BIOS-Overclocker(in)
[Review] DFI LanParty DK P45 T2RS Plus
Inhaltsverzeichnis:
An dieser Stelle möchte ich mich auch noch einmal ganz herzlich bei DaxTrose für seine tollen Bilder bedanken , die ich aus Mangel an einer guten Kamera leider nicht selber machen konnte.
Specification:
Preis:
Es gibt nur einige wenige Online Shops die das Board haben, dazu gehört beispielsweise HPM-Computer und Trend4PC. Der Preis liegt bei ca. 135€. Der Preis bezieht sich hierbei auf das Plus, welches ich auch habe und dem normalen DK vorziehen würde.
Packungsinhalt:
- das Board
- Handbuch (nicht sehr umfassend, heißt nur auf nötigste beschränkt, wie die Frontpanel Connectors)
- 1 x IDE Kabel
- 1 x Floppy Kabel
- 2 x SATA Kabel (eindeutig zu wenig, bestellt habe ich mir also zusätzlich diese Kabel, jene passen sehr gut zum Board)
- 1 x 5,25" zu 2 x SATA Stromkabel
- 1 x Crossfirebrücke
- 1 x Floppy mit SATA Raid Driver
- 1 x Treiber CD
- 1 x so ein Ding zum aufstecken der PWR LED, PWR SW, etc (mir fällt der Name net ein)
Zu erwähnen ist:
1. Die PCI-E, PCI, Speicherbänke und SATA Ports sind UV aktiv! Wer also Kaltlichtkathoden sein eigen nennen kann erfreut sich also über eine noch schönere Optik.
2. Praktisch für OC Vorhaben: Das Board hat einen Power und Reset Taster auf dem Board.
1. Impressionen
2. Spezifikationen
3. Packungsinhalt
4. Bios
5. Begriffserklärung
6. OC-Part
7. Benches Vergleich Asus Maximus II Formula
8. Inkompatibilitäten
9. Fazit
Ich werde mich mal an den Test des oben genannten Boards machen. Da dies mein erster Test in dieser Richtung ist hoffe ich natürlich auf Ratschläge von euch. Nach und nach werde ich den Test ausbauen, da ich leider momentan eher wenig Zeit habe. Anfangen werde ich mit ein paar Bildern. Weiter gehts dann mit den Spezifikationen, etc...2. Spezifikationen
3. Packungsinhalt
4. Bios
5. Begriffserklärung
6. OC-Part
7. Benches Vergleich Asus Maximus II Formula
8. Inkompatibilitäten
9. Fazit
An dieser Stelle möchte ich mich auch noch einmal ganz herzlich bei DaxTrose für seine tollen Bilder bedanken , die ich aus Mangel an einer guten Kamera leider nicht selber machen konnte.
Specification:
CPU
LGA 775 socket for:
- Intel® Core2 Quad and Intel® Core2 Duo
Supports 1333/1066/800MHz FSB
Chipset
Intel® chipset
- Northbridge:
Intel® P45 Express chipset
Intel® Fast Memory Access technology
- Southbridge: Intel® ICH10R
Four 240-pin DDR2 DIMM sockets
Supports DDR2 1066MHz (O.C 1200MHz)
Supports up to 8GB system memory
Expansion Slots
2 PCI Express (Gen 2) x16 slots
- 2-way CrossFire: One slot operating at x16 (16-lane port) or two slots each operating at x8 (8-lane ports) bandwidth
2 PCI Express x1 slots
2 PCI slots
BIOS
Award BIOS
8Mbit SPI flash BIOS
CMOS Reloaded
Audio
Realtek ALC885 High Definition audio CODEC
8-channel audio output
LAN
Marvell 88E8053 PCIE Gigabit LAN controller
Storage
Intel ICH10R chip
- Intel Matrix Storage technology
- RAID 0, RAID 1, RAID 0+1 and RAID 5
JMicron JMB363 PCI Express to SATA and PATA host controller
Rear Panel I/O
1 mini-DIN-6 PS/2 mouse port
1 mini-DIN-6 PS/2 keyboard port
1 optical S/PDIF-out port
1 coaxial RCA S/PDIF-out port
6 USB 2.0/1.1 ports
1 RJ45 LAN port
7.1 sound connectors
Internal I/O
3 connectors for 6 additional external USB 2.0 ports
1 connector for an external COM port
1 front audio connector
8 Serial ATA connectors (6 Serial ATA connectors beim non Plus)
1 40-pin IDE connector
1 floppy connector
4 fan connectors
1 diagnostic LED
Power and Reset Switch
Power Management
Ultimate 4-phase analog PWM with 12 MOSFETs
ACPI and OS Directed Power Management
ACPI STR (Suspend to RAM) function
Hardware Monitor
Monitors CPU/system/Northbridge temperature and overheat alarm
Monitors Vcore/Vdimm/Vnb/VCC5/12V/V5sb/Vbat voltages
Monitors the speed of the cooling fans
DFI liefert hier auch ein nettes Tool bei, genannt Smart Guardian:
PCB
4 layers, ATX form factor
24.5cm (9.64") x 30.5cm (12")
Quelle: dfi.com.twLGA 775 socket for:
- Intel® Core2 Quad and Intel® Core2 Duo
Supports 1333/1066/800MHz FSB
Chipset
Intel® chipset
- Northbridge:
Intel® P45 Express chipset
Intel® Fast Memory Access technology
- Southbridge: Intel® ICH10R
Four 240-pin DDR2 DIMM sockets
Supports DDR2 1066MHz (O.C 1200MHz)
Supports up to 8GB system memory
Expansion Slots
2 PCI Express (Gen 2) x16 slots
- 2-way CrossFire: One slot operating at x16 (16-lane port) or two slots each operating at x8 (8-lane ports) bandwidth
2 PCI Express x1 slots
2 PCI slots
BIOS
Award BIOS
8Mbit SPI flash BIOS
CMOS Reloaded
Audio
Realtek ALC885 High Definition audio CODEC
8-channel audio output
LAN
Marvell 88E8053 PCIE Gigabit LAN controller
Storage
Intel ICH10R chip
- Intel Matrix Storage technology
- RAID 0, RAID 1, RAID 0+1 and RAID 5
JMicron JMB363 PCI Express to SATA and PATA host controller
Rear Panel I/O
1 mini-DIN-6 PS/2 mouse port
1 mini-DIN-6 PS/2 keyboard port
1 optical S/PDIF-out port
1 coaxial RCA S/PDIF-out port
6 USB 2.0/1.1 ports
1 RJ45 LAN port
7.1 sound connectors
Internal I/O
3 connectors for 6 additional external USB 2.0 ports
1 connector for an external COM port
1 front audio connector
8 Serial ATA connectors (6 Serial ATA connectors beim non Plus)
1 40-pin IDE connector
1 floppy connector
4 fan connectors
1 diagnostic LED
Power and Reset Switch
Power Management
Ultimate 4-phase analog PWM with 12 MOSFETs
ACPI and OS Directed Power Management
ACPI STR (Suspend to RAM) function
Hardware Monitor
Monitors CPU/system/Northbridge temperature and overheat alarm
Monitors Vcore/Vdimm/Vnb/VCC5/12V/V5sb/Vbat voltages
Monitors the speed of the cooling fans
DFI liefert hier auch ein nettes Tool bei, genannt Smart Guardian:
PCB
4 layers, ATX form factor
24.5cm (9.64") x 30.5cm (12")
Preis:
Es gibt nur einige wenige Online Shops die das Board haben, dazu gehört beispielsweise HPM-Computer und Trend4PC. Der Preis liegt bei ca. 135€. Der Preis bezieht sich hierbei auf das Plus, welches ich auch habe und dem normalen DK vorziehen würde.
Packungsinhalt:
- das Board
- Handbuch (nicht sehr umfassend, heißt nur auf nötigste beschränkt, wie die Frontpanel Connectors)
- 1 x IDE Kabel
- 1 x Floppy Kabel
- 2 x SATA Kabel (eindeutig zu wenig, bestellt habe ich mir also zusätzlich diese Kabel, jene passen sehr gut zum Board)
- 1 x 5,25" zu 2 x SATA Stromkabel
- 1 x Crossfirebrücke
- 1 x Floppy mit SATA Raid Driver
- 1 x Treiber CD
- 1 x so ein Ding zum aufstecken der PWR LED, PWR SW, etc (mir fällt der Name net ein)
Zu erwähnen ist:
1. Die PCI-E, PCI, Speicherbänke und SATA Ports sind UV aktiv! Wer also Kaltlichtkathoden sein eigen nennen kann erfreut sich also über eine noch schönere Optik.
2. Praktisch für OC Vorhaben: Das Board hat einen Power und Reset Taster auf dem Board.
Zuletzt bearbeitet: