Hallo
Ich habe dieses Mainboard und diese SATA Festplatte:
HD Tune zeigt folgendes:
Wie kann ich UDMA Mode 6 (Ultra ATA/133) aktivieren.
Der Controller ist bereits im BIOS auf AHCI eingestellt.
Ich habe dieses Mainboard und diese SATA Festplatte:
Code:
Motherboard ---------------------------------------------------------------
[Computer]
Computer Brand Name: LENOVO 1578E1G
[Motherboard]
Motherboard Model: LENOVO
Motherboard Chipset: Intel H61 (Cougar Point)
Motherboard Slots: 4xPCI Express x1, 1xPCI Express x16
PCI Express Version Supported: v2.0
USB Version Supported: v2.0
[PCH Features]
USB Port Count: 10 ports
RAID Capability: Not Supported
SATA Ports 2 and 3: Not Supported
SATA Port 1 6 Gb/s: Not Supported
SATA Port 0 6 Gb/s: Not Supported
PCI Interface: Not Supported
PCI Express Ports 5 and 6: Supported
USB Redirect (USBr): Not Supported
Intel Anti-Theft Technology: Supported
PCI Express Ports 7 and 8: Not Supported
PCH Integrated Graphics Support: Supported
Data Center Manageability Interface (DCMI): Supported
Node Manager: Supported
[BIOS]
BIOS Manufacturer: American Megatrends
BIOS Date: 08/10/2012
BIOS Version: 9QKT39AUS
EFI BIOS: Capable
Super-IO/LPC Chip: Winbond/Nuvoton NCT6776
WDC WD5003ABYX-01WERA1 ----------------------------------------------------
[General Information]
Drive Controller: Serial ATA 3Gb/s
Drive Model: WDC WD5003ABYX-01WERA1
Drive Revision: 01.01S02
Drive Serial Number: WD-WMAYP3393761
Drive Capacity: 476,940 MBytes (500 GB)
Drive Capacity [MB]: 476940
Media Rotation Rate: 7200 RPM
[Drive Geometry]
Number of Cylinders: 16383
Number of Heads: 16
Sectors Per Track: 63
Bytes Per Sector: Unknown
Bytes Per Track: Unknown
Number Of ECC Bytes: 50
Number of Sectors: 16514064
Total 32-bit LBA Sectors: 268435455
Total 48-bit LBA Sectors: 976773168
Cache Buffer Size: N/A
Controller Type: Not Specified
[Transfer Modes]
Sectors Per Interrupt: Total: 16, Active: 16
Max. PIO Transfer Mode: 4
Multiword DMA Mode: Total: 2, Active: -
Singleword DMA Mode: Total: -, Active: -
Ultra-DMA Mode: Total: 6 (ATA-133), Active: 5 (ATA-100)
Max. Multiword DMA Transfer Rate: 16.7 MBytes/s
Max. PIO with IORDY Transfer Rate: 16.7 MBytes/s
Max. PIO w/o IORDY Transfer Rate: 16.7 MBytes/s
Transfer Width: 16-bit
Native Command Queuing: Supported, Max. Depth: 32
TRIM Command: Not Supported
[Device flags]
Fixed Drive: Present
Removable Drive: Not Present
Magnetic Storage: Present
LBA Mode: Supported
DMA Mode: Supported
IORDY: Supported
IORDY Disableable: Supported
[Features]
Write Cache: Present, Active
S.M.A.R.T. Feature: Present, Active
Security Feature: Present, Inactive
Removable Media Feature: Not Present, Disabled
Power Management: Present, Active
Advanced Power Management: Present, Active
Packet Interface: Not Present, Disabled
Look-Ahead Buffer: Present, Active
Host Protected Area: Present, Enabled
Power-Up In Standby: Supported, Inactive
Automatic Acoustic Management: Not Suppported, Inactive
48-bit LBA: Supported, Active
[Self-Monitoring, Analysis and Reporting Technology]
Raw Read Error Rate: 200/51, Worst: 200
Spin Up Time: 138/21, Worst: 137 (Data = 4083)
Start/Stop Count: 100/Always OK, Worst: 100 (Data = 36)
Reallocated Sector Count: 200/140, Worst: 200
Seek Error Rate: 100/Always OK, Worst: 253
Power-On Hours/Cycle Count: 100/Always OK, Worst: 100 (Data = 23)
Spin Retry Count: 100/Always OK, Worst: 253
Calibration Retry Count: 100/Always OK, Worst: 253
Power Cycle Count: 100/Always OK, Worst: 100 (Data = 34)
Power-Off Retract Count: 200/Always OK, Worst: 200 (Data = 10)
Load/Unload Cycle Count: 200/Always OK, Worst: 200 (Data = 25)
Temperature 112/Always OK, Worst: 109 (Data = 31.0 °C)
Reallocation Event Count: 200/Always OK, Worst: 200
Current Pending Sector Count: 200/Always OK, Worst: 200
Off-Line Uncorrectable Sector Count: 100/Always OK, Worst: 253
UltraDMA/SATA CRC Error Rate: 200/Always OK, Worst: 200
Write/Multi-Zone Error Rate: 100/Always OK, Worst: 253
Code:
HD Tune: WDC WD5003ABYX-01WERA1
Firmware version : 01.01S02
Serial number : WD-WMAYP3393774
Capacity : 465.8 GB (~500.1 GB)
Buffer size : n/a
[B]Standard : ATA/ATAPI-8 - SATA II
Supported mode : UDMA Mode 6 (Ultra ATA/133)
Current mode : UDMA Mode 5 (Ultra ATA/100)[/B]
S.M.A.R.T : yes
48-bit Address : yes
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Automatic Acoustic Management: no
Power Management : yes
Advanced Power Management : yes
Power-up in Standby : yes
Security Mode : yes
Firmware Upgradable : yes
Partition : 1
Drive letter :
Label :
Capacity : 1200 MB
Usage : 0.00%
Type : NTFS
Bootable : Yes
Partition : 2
Drive letter : C:\
Label : Windows7_OS
Capacity : 456959 MB
Usage : 23.17%
Type : NTFS
Bootable : No
Partition : 3
Drive letter : Q:\
Label : "Lenovo_Recovery"
Capacity : 18780 MB
Usage : 62.09%
Type : NTFS
Bootable : NoDer Controller ist bereits im BIOS auf AHCI eingestellt.
