Pleusch
PC-Selbstbauer(in)
Hallo,
Ich wollte ma fragen ob jemand von euch mir diese ganzen Menüpunkte mal etwas verständlicher erklären kann. Ich blick gerade bei den Punkten ohne richtige beschreibung garnicht durch welche funktion sie erfüllen sollen und wie sie sich auf die Stabilität des PC's auswirken.
Ich finde die Erklärungen für diese Option im Handbuch sehr ungenau. Wirklich schlau wird man aus den meisten hier gelisteten optionen nicht.
Vill könnt ihr mir gerade auch was die DRAM einstellungen betrifft mehr sagen und wie sie sich auf stabilität und Hitzeentwicklung auswirken.
Hier die Liste:
3.3.2 OC Tuner Utility
OC Tuner utility automatically overclocks the frequency and voltage of the CPU and DRAM. Press <Enter> to start auto tuning. It takes around five minutes, and the system will reboot for several times until auto tuning is completed.
3.3.3 Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency.
OC From CPU Level UP [Auto]
This item appears only when you set the Ai Overclock Tuner item to [Manual] and allows you to select a CPU level. The related parameters will be automatically adjusted according to the selected CPU level.
CPU Bus Frequency [XXX]
This item appears only when you set the Ai Overclock Tuner item to [Manual] and displays the frequency sent by the clock generator to the system bus and PCI bus. Use the <+> and <-> keys to adjust the CPU Bus frequency. You can also key in the desired frequency using the numeric keypad. The values range from 100 to 600.
PCIE Frequency [XXX]
This item appears only when you set the Ai Overclock Tuner item to [Manual] and allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust the PCIE frequency. You can also key in the desired value using the numeric keypad. The values range from 100 to 150.
DRAM O.C. Profile [DDR3-1600MHz]
This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and allows you to select a DRAM O.C. profile, which applies different settings to DRAM frequency, DRAM timing and DRAM voltage. Configuration options: [DDR3-1600MHz] [DDR3-1800MHz] [DDR3-1866MHz] [DDR3-2000MHz
Profile Info : xxxxMHz–x-x-x-xx
This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and displays the current DRAM profile information. The profile information varies according to the DRAM O.C. Profile you’ve selected.
3.3.4 CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the FSB Frequency. Use the <+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
3.3.5 DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency. The configuration options vary with the CPU Bus Frequency item settings.
Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting.
3.3.6 CPU/NB Frequency [Auto]
Allows you to select the CPU/NB frequency.
Configuration options: [Auto] [1200MHz] [1400MHz] [1600MHz] [1800MHz] [2000MHz]
3.3.7 HT Link Speed [Auto]
Allows you to select the HyperTransport link speed.
Configuration options: [Auto] [200MHz] [400MHz] [600MHz] [800MHz] [1000MHz] [1200MHz] [1400MHz] [1600MHz] [1800MHz] [2000MHz]
3.3.8 DRAM Timing Configuration
The configuration options for some of the following items vary depending on the DIMMs you install on the motherboard.
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [4 CLK] – [12 CLK]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto][5 CLK] – [12 CLK]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto][5 CLK] – [12 CLK]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [15 CLK] – [30 CLK]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [4 CLK] [5 CLK] [6 CLK] [7 CLK]
DRAM Row Cycle Time [Auto]
Configuration options: [Auto] [11 CLK] – [41 CLK]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [5 CLK] [6 CLK] [7 CLK] [8 CLK] [10 CLK] [12 CLK]
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [4 CLK] [5 CLK] [6 CLK] [7 CLK]
DRAM READ to WRITE Delay [Auto]
Configuration options: [Auto] [3 CLK] – [17 CLK]
DRAM WRITE to READ Delay(DD) [Auto]
Configuration options: [Auto] [2 CLK] – [10 CLK]
DRAM WRITE to READ Delay(SD) [Auto]
Configuration options: [Auto] [4 CLK] [5 CLK] [6 CLK] [7 CLK]
DRAM WRITE to WRITE Timing [Auto]
Configuration options: [Auto] [3 CLK] – [10 CLK]
DRAM READ to READ Timing [Auto]
Configuration options: [Auto] [3 CLK] – [10 CLK]
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [90ns] [110ns][160ns] [300ns] [350ns]
DRAM Refresh Rate [Auto]
Configuration options: [Auto] [Every 7.8ms] [Every 3.9ms]
DRAM Command Rate [Auto]
Configuration options: [Auto] [1T] [2T]
3.3.9 DRAM Driving Configuration
The configuration options for some of the following items vary depending on the DIMMs you install on the motherboard.
CKE drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
CS/ODT drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
ADDR/CMD drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
MEMCLK drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Processor ODT [Auto]
Configuration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60 ohms +/- 20%]
Some of the following items are adjusted by typing the desired values using the numeric keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the <Enter> key.
3.3.10 CPU & NB Voltage Mode [Offset]
Allows you to set the CPU & CPU/NB Voltage Mode. Different sub-items appear according to the CPU & NB Voltage Mode item setting. Configuration options: [Offset] [Manual]
CPU Offset Voltage [Auto]
This item appears only when you set the CPU & NB Voltage Mode item to [Offset] and allows you to set the CPU Offset voltage. The values range from 0.006250V to 0.700000V with a 0.006250V interval.
CPU/NB Offset Voltage [Auto]
This item appears only when you set the CPU & NB Voltage Mode item to [Offset] and allows you to set the CPU/NB Offset voltage. The values range from 0.006250V to 0.700000V with a 0.006250V interval.
CPU Voltage [Auto]
This item appears only when you set the CPU & NB Voltage Mode item to [Manual] and allows you to set a fixed CPU voltage.
CPU/NB Voltage [Auto]
This item appears only when you set the CPU & NB Voltage Mode item to [Manual] and allows you to set a fixed CPU/NB voltage.
3.3.11 CPU VDDA Voltage [Auto]
Allows you to set the CPU VDDA voltage. The values range from 2.20000V to 3.18750V with a 0.01250V interval.
3.3.12 DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.20000V to 2.90000V with a 0.01250V interval.
3.3.13 HT Voltage [Auto]
Allows you to set the HyperTransport voltage. The values range from 0.80000V to 2.00000V with a 0.01250V interval.
3.3.14 NB Voltage [Auto]
Allows you to set the Northbridge voltage. The values range from 0.80000V to 2.00000V with a 0.01250V interval.
3.3.15 NB 1.8V Voltage [Auto]
Allows you to set the Northbridge 1.8V voltage. The values range from 1.802000V to 3.007750V with a 0.013250V interval.
3.3.16 SB Voltage [Auto]
Allows you to set the Southbridge voltage. The values range from 1.113000V to 1.802000V with a 0.013250V interval.
3.3.17 VDDR Voltage [Auto]
Allows you to set the VDDR voltage. The values range from 1.205750V to 1.802000V with a 0.013250V interval.
3.3.18 VDDPCIE Voltage [Auto]
Allows you to set the VDDPCIE voltage. The values range from 1.113000V to 2.000750V with a 0.013250V interval.
The system may need better cooling system to work stably under high voltage settings.
3.3.19 DRAM CTRL REF Voltage [Auto]
Allows you to set the DRAM Control Reference Voltage The values range from 0.395x to 0.630x with a 0.005x interval. Different ratio might enhance DRAM overclocking ability.
3.3.20 DRAM DATA REF Voltage [Auto]
Allows you to set the DRAM DATA Reference VoltageThe values range from 0.395x to 0.630x with a 0.005x interval. Different ratio might enhance DRAM overclocking ability.
3.3.21 CPU Load-Line Calibration [Auto]
Allows you to select the CPU Load-Line mode.
Configuration options: [Auto] [Disabled] [Enabled]
3.3.22 CPU/NB Load-Line Calibration [Auto]
Allows you to select the CPU/NB Load-Line mode.
Configuration options: [Auto] [Disabled] [Enabled]
3.3.23 CPU Spread Spectrum [Auto]
[Auto] Automatic configuration.
[Disabled] Enhances the CPU overclocking ability.
[Enabled] Sets to [Enabled] for EMI control.
3.3.24 PCIE Spread Spectrum [Auto]
[Auto] Automatic configuration.
[Disabled] Enhances the PCIE overclocking ability.
[Enabled] Sets to [Enabled] for EMI control.
Mfg und danke im Vorraus
Ich wollte ma fragen ob jemand von euch mir diese ganzen Menüpunkte mal etwas verständlicher erklären kann. Ich blick gerade bei den Punkten ohne richtige beschreibung garnicht durch welche funktion sie erfüllen sollen und wie sie sich auf die Stabilität des PC's auswirken.
Ich finde die Erklärungen für diese Option im Handbuch sehr ungenau. Wirklich schlau wird man aus den meisten hier gelisteten optionen nicht.
Vill könnt ihr mir gerade auch was die DRAM einstellungen betrifft mehr sagen und wie sie sich auf stabilität und Hitzeentwicklung auswirken.
Hier die Liste:
3.3.2 OC Tuner Utility
OC Tuner utility automatically overclocks the frequency and voltage of the CPU and DRAM. Press <Enter> to start auto tuning. It takes around five minutes, and the system will reboot for several times until auto tuning is completed.
3.3.3 Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency.
OC From CPU Level UP [Auto]
This item appears only when you set the Ai Overclock Tuner item to [Manual] and allows you to select a CPU level. The related parameters will be automatically adjusted according to the selected CPU level.
CPU Bus Frequency [XXX]
This item appears only when you set the Ai Overclock Tuner item to [Manual] and displays the frequency sent by the clock generator to the system bus and PCI bus. Use the <+> and <-> keys to adjust the CPU Bus frequency. You can also key in the desired frequency using the numeric keypad. The values range from 100 to 600.
PCIE Frequency [XXX]
This item appears only when you set the Ai Overclock Tuner item to [Manual] and allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust the PCIE frequency. You can also key in the desired value using the numeric keypad. The values range from 100 to 150.
DRAM O.C. Profile [DDR3-1600MHz]
This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and allows you to select a DRAM O.C. profile, which applies different settings to DRAM frequency, DRAM timing and DRAM voltage. Configuration options: [DDR3-1600MHz] [DDR3-1800MHz] [DDR3-1866MHz] [DDR3-2000MHz
Profile Info : xxxxMHz–x-x-x-xx
This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and displays the current DRAM profile information. The profile information varies according to the DRAM O.C. Profile you’ve selected.
3.3.4 CPU Ratio [Auto]
Allows you to set the ratio between the CPU Core Clock and the FSB Frequency. Use the <+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
3.3.5 DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency. The configuration options vary with the CPU Bus Frequency item settings.
Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting.
3.3.6 CPU/NB Frequency [Auto]
Allows you to select the CPU/NB frequency.
Configuration options: [Auto] [1200MHz] [1400MHz] [1600MHz] [1800MHz] [2000MHz]
3.3.7 HT Link Speed [Auto]
Allows you to select the HyperTransport link speed.
Configuration options: [Auto] [200MHz] [400MHz] [600MHz] [800MHz] [1000MHz] [1200MHz] [1400MHz] [1600MHz] [1800MHz] [2000MHz]
3.3.8 DRAM Timing Configuration
The configuration options for some of the following items vary depending on the DIMMs you install on the motherboard.
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [4 CLK] – [12 CLK]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto][5 CLK] – [12 CLK]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto][5 CLK] – [12 CLK]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [15 CLK] – [30 CLK]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [4 CLK] [5 CLK] [6 CLK] [7 CLK]
DRAM Row Cycle Time [Auto]
Configuration options: [Auto] [11 CLK] – [41 CLK]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [5 CLK] [6 CLK] [7 CLK] [8 CLK] [10 CLK] [12 CLK]
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [4 CLK] [5 CLK] [6 CLK] [7 CLK]
DRAM READ to WRITE Delay [Auto]
Configuration options: [Auto] [3 CLK] – [17 CLK]
DRAM WRITE to READ Delay(DD) [Auto]
Configuration options: [Auto] [2 CLK] – [10 CLK]
DRAM WRITE to READ Delay(SD) [Auto]
Configuration options: [Auto] [4 CLK] [5 CLK] [6 CLK] [7 CLK]
DRAM WRITE to WRITE Timing [Auto]
Configuration options: [Auto] [3 CLK] – [10 CLK]
DRAM READ to READ Timing [Auto]
Configuration options: [Auto] [3 CLK] – [10 CLK]
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [90ns] [110ns][160ns] [300ns] [350ns]
DRAM Refresh Rate [Auto]
Configuration options: [Auto] [Every 7.8ms] [Every 3.9ms]
DRAM Command Rate [Auto]
Configuration options: [Auto] [1T] [2T]
3.3.9 DRAM Driving Configuration
The configuration options for some of the following items vary depending on the DIMMs you install on the motherboard.
CKE drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
CS/ODT drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
ADDR/CMD drive strength [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
MEMCLK drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Data drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DQS drive strength [Auto]
Configuration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Processor ODT [Auto]
Configuration options: [Auto] [240 ohms +/- 20%] [120 ohms +/- 20%] [60 ohms +/- 20%]
Some of the following items are adjusted by typing the desired values using the numeric keypad and press the <Enter> key. You can also use the <+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the <Enter> key.
3.3.10 CPU & NB Voltage Mode [Offset]
Allows you to set the CPU & CPU/NB Voltage Mode. Different sub-items appear according to the CPU & NB Voltage Mode item setting. Configuration options: [Offset] [Manual]
CPU Offset Voltage [Auto]
This item appears only when you set the CPU & NB Voltage Mode item to [Offset] and allows you to set the CPU Offset voltage. The values range from 0.006250V to 0.700000V with a 0.006250V interval.
CPU/NB Offset Voltage [Auto]
This item appears only when you set the CPU & NB Voltage Mode item to [Offset] and allows you to set the CPU/NB Offset voltage. The values range from 0.006250V to 0.700000V with a 0.006250V interval.
CPU Voltage [Auto]
This item appears only when you set the CPU & NB Voltage Mode item to [Manual] and allows you to set a fixed CPU voltage.
CPU/NB Voltage [Auto]
This item appears only when you set the CPU & NB Voltage Mode item to [Manual] and allows you to set a fixed CPU/NB voltage.
3.3.11 CPU VDDA Voltage [Auto]
Allows you to set the CPU VDDA voltage. The values range from 2.20000V to 3.18750V with a 0.01250V interval.
3.3.12 DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.20000V to 2.90000V with a 0.01250V interval.
3.3.13 HT Voltage [Auto]
Allows you to set the HyperTransport voltage. The values range from 0.80000V to 2.00000V with a 0.01250V interval.
3.3.14 NB Voltage [Auto]
Allows you to set the Northbridge voltage. The values range from 0.80000V to 2.00000V with a 0.01250V interval.
3.3.15 NB 1.8V Voltage [Auto]
Allows you to set the Northbridge 1.8V voltage. The values range from 1.802000V to 3.007750V with a 0.013250V interval.
3.3.16 SB Voltage [Auto]
Allows you to set the Southbridge voltage. The values range from 1.113000V to 1.802000V with a 0.013250V interval.
3.3.17 VDDR Voltage [Auto]
Allows you to set the VDDR voltage. The values range from 1.205750V to 1.802000V with a 0.013250V interval.
3.3.18 VDDPCIE Voltage [Auto]
Allows you to set the VDDPCIE voltage. The values range from 1.113000V to 2.000750V with a 0.013250V interval.
The system may need better cooling system to work stably under high voltage settings.
3.3.19 DRAM CTRL REF Voltage [Auto]
Allows you to set the DRAM Control Reference Voltage The values range from 0.395x to 0.630x with a 0.005x interval. Different ratio might enhance DRAM overclocking ability.
3.3.20 DRAM DATA REF Voltage [Auto]
Allows you to set the DRAM DATA Reference VoltageThe values range from 0.395x to 0.630x with a 0.005x interval. Different ratio might enhance DRAM overclocking ability.
3.3.21 CPU Load-Line Calibration [Auto]
Allows you to select the CPU Load-Line mode.
Configuration options: [Auto] [Disabled] [Enabled]
3.3.22 CPU/NB Load-Line Calibration [Auto]
Allows you to select the CPU/NB Load-Line mode.
Configuration options: [Auto] [Disabled] [Enabled]
3.3.23 CPU Spread Spectrum [Auto]
[Auto] Automatic configuration.
[Disabled] Enhances the CPU overclocking ability.
[Enabled] Sets to [Enabled] for EMI control.
3.3.24 PCIE Spread Spectrum [Auto]
[Auto] Automatic configuration.
[Disabled] Enhances the PCIE overclocking ability.
[Enabled] Sets to [Enabled] for EMI control.
Mfg und danke im Vorraus
Zuletzt bearbeitet:
sogar bei 1,5V fällt mir jetzt im Prime-Test immer direkt ein Kern aus.
