_unknown_xX
Komplett-PC-Käufer(in)
Moin Moin,
ich hoffe hier kann mir jemand weiterhelfen. Bitte ggf. das Thema verschieben.
In der Linus Community hat sich lieder bislang keiner gemeldet.
Ich will 2 Gaming NAS Systeme aufsetzten.
Mein System:
INTEL Core i7-5930K watercooled
Corsair Dominator Platinum 32GB @ 2666Mhz
Asus GTX 980 ti Strix watercooled
Asus GTX 970 Strix
Asus ROG Rampage V Extreme
Samsung SSD 850 EVO 500 GB
Samsung SSD 840 EVO 500 GB
INTEL VT aktiviert
INTEL VT-D aktiviert
Meine erste VM die ich aufgesetzt habe (läuft mit der GTX970) läuft wunderbar.
Bei meiner zweiten VM (läuft auf der GTX 980 ti)bekomme ich kein Video Signal auf den Bildschirm.
Zweites Problem immer wenn die erste VM läuft und ich die zweite starte geht die erste wieder aus. Sie laufen nie simultan immer geht eine aus.
PCI Devices:
IOMMU Groups
VM-Configs
Bildschirmfoto 216-4-27 um 21.38.14.png - directupload.net
Bildschirmfoto 216-4-27 um 21.39.29.png - directupload.net
XML VM2 (wo ich kein Bild auf den Monitor bekomme)
XML VM1 (welche ohne Probleme läuft)
Ich hoffe der ein oder andere hier kann mir helfen,
danke für Eure Hilfe!!
ich hoffe hier kann mir jemand weiterhelfen. Bitte ggf. das Thema verschieben.
In der Linus Community hat sich lieder bislang keiner gemeldet.
Ich will 2 Gaming NAS Systeme aufsetzten.
Mein System:
INTEL Core i7-5930K watercooled
Corsair Dominator Platinum 32GB @ 2666Mhz
Asus GTX 980 ti Strix watercooled
Asus GTX 970 Strix
Asus ROG Rampage V Extreme
Samsung SSD 850 EVO 500 GB
Samsung SSD 840 EVO 500 GB
INTEL VT aktiviert
INTEL VT-D aktiviert
Meine erste VM die ich aufgesetzt habe (läuft mit der GTX970) läuft wunderbar.
Bei meiner zweiten VM (läuft auf der GTX 980 ti)bekomme ich kein Video Signal auf den Bildschirm.
Zweites Problem immer wenn die erste VM läuft und ich die zweite starte geht die erste wieder aus. Sie laufen nie simultan immer geht eine aus.
PCI Devices:
Code:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 17c8 (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 0fb0 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1)
02:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller (rev a1)
Code:
/sys/kernel/iommu_groups/34/devices/0000:02:00.0
/sys/kernel/iommu_groups/34/devices/0000:02:00.1
/sys/kernel/iommu_groups/35/devices/0000:01:00.0
/sys/kernel/iommu_groups/35/devices/0000:01:00.1
Bildschirmfoto 216-4-27 um 21.38.14.png - directupload.net
Bildschirmfoto 216-4-27 um 21.39.29.png - directupload.net
XML VM2 (wo ich kein Bild auf den Monitor bekomme)
Code:
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
<name>Two</name>
<uuid>cbbbc1a6-de7d-0fcc-3508-d9061875e566</uuid>
<metadata>
<vmtemplate name="Custom" icon="windows.png" os="windows"/>
</metadata>
<memory unit='KiB'>15728640</memory>
<currentMemory unit='KiB'>15728640</currentMemory>
<memoryBacking>
<nosharepages/>
<locked/>
</memoryBacking>
<vcpu placement='static'>6</vcpu>
<cputune>
<vcpupin vcpu='0' cpuset='0'/>
<vcpupin vcpu='1' cpuset='1'/>
<vcpupin vcpu='2' cpuset='2'/>
<vcpupin vcpu='3' cpuset='3'/>
<vcpupin vcpu='4' cpuset='4'/>
<vcpupin vcpu='5' cpuset='5'/>
</cputune>
<os>
<type arch='x86_64' machine='pc-i440fx-2.3'>hvm</type>
</os>
<features>
<acpi/>
<apic/>
</features>
<cpu mode='host-passthrough'>
<topology sockets='1' cores='6' threads='1'/>
</cpu>
<clock offset='localtime'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw' cache='writeback'/>
<source file='/mnt/user/vidsks/Two/vdisk1.img'/>
<target dev='hdc' bus='virtio'/>
<boot order='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/mnt/user/ISOs/de_windows_10_multiple_editions_version_1511_x64_dvd_7223737.iso.iso'/>
<target dev='hda' bus='ide'/>
<readonly/>
<boot order='2'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/mnt/user/ISOs/virtio-win-0.1.117.iso'/>
<target dev='hdb' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
<controller type='usb' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'/>
<controller type='ide' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<controller type='virtio-serial' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:e0:45:33'/>
<source bridge='br0'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</interface>
<serial type='pty'>
<target port='0'/>
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
<channel type='unix'>
<source mode='bind' path='/var/lib/libvirt/qemu/channel/target/Two.org.qemu.guest_agent.0'/>
<target type='virtio' name='org.qemu.guest_agent.0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<hostdev mode='subsystem' type='usb' managed='yes'>
<source>
<vendor id='0x046d'/>
<product id='0xc22d'/>
</source>
</hostdev>
<hostdev mode='subsystem' type='usb' managed='yes'>
<source>
<vendor id='0x1038'/>
<product id='0x1369'/>
</source>
</hostdev>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memballoon>
</devices>
<qemu:commandline>
<qemu:arg value='-device'/>
<qemu:arg value='ioh3420,bus=pci.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/>
<qemu:arg value='-device'/>
<qemu:arg value='vfio-pci,host=01:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on'/>
<qemu:arg value='-device'/>
<qemu:arg value='vfio-pci,host=01:00.1,bus=root.1,addr=00.1'/>
</qemu:commandline>
</domain>
XML VM1 (welche ohne Probleme läuft)
Code:
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
<name>One</name>
<uuid>41bd54ff-9da1-4722-efa3-84b4be9d6ac1</uuid>
<metadata>
<vmtemplate name="Custom" icon="windows.png" os="windows"/>
</metadata>
<memory unit='KiB'>15728640</memory>
<currentMemory unit='KiB'>15728640</currentMemory>
<memoryBacking>
<nosharepages/>
<locked/>
</memoryBacking>
<vcpu placement='static'>6</vcpu>
<cputune>
<vcpupin vcpu='0' cpuset='6'/>
<vcpupin vcpu='1' cpuset='7'/>
<vcpupin vcpu='2' cpuset='8'/>
<vcpupin vcpu='3' cpuset='9'/>
<vcpupin vcpu='4' cpuset='10'/>
<vcpupin vcpu='5' cpuset='11'/>
</cputune>
<os>
<type arch='x86_64' machine='pc-i440fx-2.3'>hvm</type>
</os>
<features>
<acpi/>
<apic/>
</features>
<cpu mode='host-passthrough'>
<topology sockets='1' cores='6' threads='1'/>
</cpu>
<clock offset='localtime'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw' cache='writeback'/>
<source file='/mnt/user/vidsks/One/vdisk1.img'/>
<target dev='hdc' bus='virtio'/>
<boot order='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/mnt/user/ISOs/de_windows_10_multiple_editions_version_1511_x64_dvd_7223737.iso.iso'/>
<target dev='hda' bus='ide'/>
<readonly/>
<boot order='2'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/mnt/user/ISOs/virtio-win-0.1.117.iso'/>
<target dev='hdb' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
<controller type='usb' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'/>
<controller type='ide' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<controller type='virtio-serial' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:cf:28:02'/>
<source bridge='br0'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</interface>
<serial type='pty'>
<target port='0'/>
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
<channel type='unix'>
<source mode='bind' path='/var/lib/libvirt/qemu/channel/target/One.org.qemu.guest_agent.0'/>
<target type='virtio' name='org.qemu.guest_agent.0'/>
<address type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
<hostdev mode='subsystem' type='usb' managed='yes'>
<source>
<vendor id='0x1038'/>
<product id='0x1384'/>
</source>
</hostdev>
<hostdev mode='subsystem' type='usb' managed='yes'>
<source>
<vendor id='0x1038'/>
<product id='0x1202'/>
</source>
</hostdev>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memballoon>
</devices>
<qemu:commandline>
<qemu:arg value='-device'/>
<qemu:arg value='ioh3420,bus=pci.0,addr=1c.0,multifunction=on,port=2,chassis=1,id=root.1'/>
<qemu:arg value='-device'/>
<qemu:arg value='vfio-pci,host=02:00.0,bus=root.1,addr=00.0,multifunction=on,x-vga=on'/>
<qemu:arg value='-device'/>
<qemu:arg value='vfio-pci,host=02:00.1,bus=root.1,addr=00.1'/>
</qemu:commandline>
</domain>
Ich hoffe der ein oder andere hier kann mir helfen,
danke für Eure Hilfe!!
Zuletzt bearbeitet: