OCZ Ram aufrüsten

MR. Wayne

PC-Selbstbauer(in)
OCZ Ram aufrüsten

Hallo,

Ich habe diese Riegel verbaut: OCZ Platinum Low-Voltage DIMM Kit 6GB PC3-12800U CL7-7-7-24 (DDR3-1600)

möchte auf 12GB nachrüsten.


Technische Daten:
[General information]
Total Memory Size: 6 GBytes
Total Memory Size [MB]: 6144
[Current Performance Settings]
Maximum Supported Memory Clock: 533.3 MHz (4 : 1 ratio)
Current Memory Clock: 534.5 MHz (4 : 1 ratio)
Current Timing (tCAS-tRCD-tRP-tRAS): 7.0-7-7-20
Memory Runs At: Triple-Channel
Command Rate: 1T
Read to Read Delay (tRD_RD) Same Rank: 4T
Read to Read Delay (tRD_RD) Different Rank: 6T
Read to Read Delay (tRD_RD) Different DIMM: 7T
Write to Write Delay (tWR_WR) Same Rank: 4T
Write to Write Delay (tWR_WR) Different Rank: 7T
Write to Write Delay (tWR_WR) Different DIMM: 7T
Read to Write Delay (tRD_WR) Same Rank: 9T
Read to Write Delay (tRD_WR) Different Rank: 9T
Read to Write Delay (tRD_WR) Different DIMM: 9T
Write to Read Delay (tWR_RD) Same Rank (tWTR): 14T
Write to Read Delay (tWR_RD) Different Rank: 6T
Write to Read Delay (tWR_RD) Different DIMM: 6T
Read to Precharge Delay (tRTP): 4T
Write to Precharge Delay (tWTP): 18T
Write Recovery Time (tWR): 7T
RAS# to RAS# Delay (tRRD): 4T
Refresh Cycle Time (tRFC): 59T
Four Activate Window (tFAW): 20T

Row: 0 - 2048 MB PC3-8500 DDR3 SDRAM OCZ OCZ3P1600LV2G --------------------

[General Module Information]
Module Number: 0
Module Size: 2048 MBytes
Memory Type: DDR3 SDRAM
Module Type: Unbuffered DIMM (UDIMM)
Memory Speed: 533.3 MHz (DDR3-1066 / PC3-8500)
Module Manufacturer: OCZ
Module Part Number: OCZ3P1600LV2G
Module Revision: 0
Module Serial Number: 0
Module Manufacturing Date: Year: 2000, Week: 0
Module Manufacturing Location: 2
SDRAM Manufacturer: Unknown
Error Check/Correction: None
[Module characteristics]
Row Address Bits: 14
Column Address Bits: 10
Number Of Banks: 8
Module Density: 1024 Mb
Number Of Ranks: 2
Device Width: 8 bits
Bus Width: 64 bits
Module Nominal Voltage (VDD): 1.5 V
[Module timing]
Minimum SDRAM Cycle Time (tCKmin): 1.875 ns
CAS# Latencies Supported: 5, 6, 7, 8
Minimum CAS# Latency Time (tAAmin): 13.125 ns
Minimum RAS# to CAS# Delay (tRCDmin): 13.125 ns
Minimum Row Precharge Time (tRPmin): 13.125 ns
Minimum Active to Precharge Time (tRASmin): 30.000 ns
Supported Module Timing at 533.3 MHz: 7-7-7-16
Supported Module Timing at 466.7 MHz: 7-7-7-15
Supported Module Timing at 400.0 MHz: 6-6-6-12
Supported Module Timing at 333.3 MHz: 5-5-5-10
Minimum Write Recovery Time (tWRmin): 15.000 ns
Minimum Row Active to Row Active Delay (tRRDmin): 7.500 ns
Minimum Active to Active/Refresh Time (tRCmin): 49.500 ns
Minimum Refresh Recovery Time Delay (tRFCmin): 110.000 ns
Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns
Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns
Minimum Four Activate Window Delay Time (tFAWmin): 30.000 ns
[Features]
Partial Array Self Refresh (PASR): Not Supported
On-die Thermal Sensor (ODTS) Readout: Not Supported
Auto Self Refresh (ASR): Supported
Extended Temperature Refresh Rate: Not Supported
Extended Temperature Range: Not Supported
Module Temperature Sensor: Not Supported
Module Nominal Height: <= 15 mm
Module Maximum Thickness (Front): <= 1 mm
Module Maximum Thickness (Back): <= 1 mm

Row: 2 - 2048 MB PC3-8500 DDR3 SDRAM OCZ OCZ3P1600LV2G --------------------

[General Module Information]
Module Number: 2
Module Size: 2048 MBytes
Memory Type: DDR3 SDRAM
Module Type: Unbuffered DIMM (UDIMM)
Memory Speed: 533.3 MHz (DDR3-1066 / PC3-8500)
Module Manufacturer: OCZ
Module Part Number: OCZ3P1600LV2G
Module Revision: 0
Module Serial Number: 0
Module Manufacturing Date: Year: 2000, Week: 0
Module Manufacturing Location: 2
SDRAM Manufacturer: Unknown
Error Check/Correction: None
[Module characteristics]
Row Address Bits: 14
Column Address Bits: 10
Number Of Banks: 8
Module Density: 1024 Mb
Number Of Ranks: 2
Device Width: 8 bits
Bus Width: 64 bits
Module Nominal Voltage (VDD): 1.5 V
[Module timing]
Minimum SDRAM Cycle Time (tCKmin): 1.875 ns
CAS# Latencies Supported: 5, 6, 7, 8
Minimum CAS# Latency Time (tAAmin): 13.125 ns
Minimum RAS# to CAS# Delay (tRCDmin): 13.125 ns
Minimum Row Precharge Time (tRPmin): 13.125 ns
Minimum Active to Precharge Time (tRASmin): 30.000 ns
Supported Module Timing at 533.3 MHz: 7-7-7-16
Supported Module Timing at 466.7 MHz: 7-7-7-15
Supported Module Timing at 400.0 MHz: 6-6-6-12
Supported Module Timing at 333.3 MHz: 5-5-5-10
Minimum Write Recovery Time (tWRmin): 15.000 ns
Minimum Row Active to Row Active Delay (tRRDmin): 7.500 ns
Minimum Active to Active/Refresh Time (tRCmin): 49.500 ns
Minimum Refresh Recovery Time Delay (tRFCmin): 110.000 ns
Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns
Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns
Minimum Four Activate Window Delay Time (tFAWmin): 30.000 ns
[Features]
Partial Array Self Refresh (PASR): Not Supported
On-die Thermal Sensor (ODTS) Readout: Not Supported
Auto Self Refresh (ASR): Supported
Extended Temperature Refresh Rate: Not Supported
Extended Temperature Range: Not Supported
Module Temperature Sensor: Not Supported
Module Nominal Height: <= 15 mm
Module Maximum Thickness (Front): <= 1 mm
Module Maximum Thickness (Back): <= 1 mm

Row: 4 - 2048 MB PC3-8500 DDR3 SDRAM OCZ OCZ3P1600LV2G --------------------

[General Module Information]
Module Number: 4
Module Size: 2048 MBytes
Memory Type: DDR3 SDRAM
Module Type: Unbuffered DIMM (UDIMM)
Memory Speed: 533.3 MHz (DDR3-1066 / PC3-8500)
Module Manufacturer: OCZ
Module Part Number: OCZ3P1600LV2G
Module Revision: 0
Module Serial Number: 0
Module Manufacturing Date: Year: 2000, Week: 0
Module Manufacturing Location: 2
SDRAM Manufacturer: Unknown
Error Check/Correction: None
[Module characteristics]
Row Address Bits: 14
Column Address Bits: 10
Number Of Banks: 8
Module Density: 1024 Mb
Number Of Ranks: 2
Device Width: 8 bits
Bus Width: 64 bits
Module Nominal Voltage (VDD): 1.5 V
[Module timing]
Minimum SDRAM Cycle Time (tCKmin): 1.875 ns
CAS# Latencies Supported: 5, 6, 7, 8
Minimum CAS# Latency Time (tAAmin): 13.125 ns
Minimum RAS# to CAS# Delay (tRCDmin): 13.125 ns
Minimum Row Precharge Time (tRPmin): 13.125 ns
Minimum Active to Precharge Time (tRASmin): 30.000 ns
Supported Module Timing at 533.3 MHz: 7-7-7-16
Supported Module Timing at 466.7 MHz: 7-7-7-15
Supported Module Timing at 400.0 MHz: 6-6-6-12
Supported Module Timing at 333.3 MHz: 5-5-5-10
Minimum Write Recovery Time (tWRmin): 15.000 ns
Minimum Row Active to Row Active Delay (tRRDmin): 7.500 ns
Minimum Active to Active/Refresh Time (tRCmin): 49.500 ns
Minimum Refresh Recovery Time Delay (tRFCmin): 110.000 ns
Minimum Internal Write to Read Command Delay (tWTRmin): 7.500 ns
Minimum Internal Read to Precharge Command Delay (tRTPmin): 7.500 ns
Minimum Four Activate Window Delay Time (tFAWmin): 30.000 ns
[Features]
Partial Array Self Refresh (PASR): Not Supported
On-die Thermal Sensor (ODTS) Readout: Not Supported
Auto Self Refresh (ASR): Supported
Extended Temperature Refresh Rate: Not Supported
Extended Temperature Range: Not Supported
Module Temperature Sensor: Not Supported
Module Nominal Height: <= 15 mm
Module Maximum Thickness (Front): <= 1 mm

Genau diese bekomme ich leider nicht mehr und ich weiß nicht welche ich nehmen kann ohne das sie sich beißen mit anderen Herstellern? oder gleich neu? und wenn ja, welche?. Könnt ihr mir bitte helfen?
 
Zuletzt bearbeitet:
AW: OCZ Ram aufrüsten

Wieso bekommst du die nicht mehr. Ist ja nicht wirklich ein seltenes Kit. Gib mal bei Ebay 3P1600C6LV6GK ein. (Handelt sich aber um das CL 7 kit) Da läuft in 2 Tagen ein Kit ab.
 
AW: OCZ Ram aufrüsten

Ich hatte bis jetzt bei Auktionen immer Pech, deshalb habe ich direkt nach Alternative Lösungen gefragt.
 
AW: OCZ Ram aufrüsten

Die RAM Preise sind ja aktuell nicht gerade so, dass einem schwarz vor Augen wird. Als ich aufgerüstet hatte zum Xeon, hab ich gleich neuen RAM mitbestellt, drauf gesch.... ;)
Wenn Du ordentlich übertaktest, läuft der Speicher ja mit im Takt durch den Speicher Multi sonst wird das nix, also kannst Du Dir 3x4GB 2400er Riegel kaufen um Tripple Channel zu nutzen oder wie ich 2x4GB im Dual Channel (je nach Budget) und die Dinger locker mit 1800Mhz laufen lassen ohne Schweißperlen. Board und CPU können damit umgehen, viel wichtiger als der Takt an sich ist die Spannung. Mehr Spannung=höhere Temperatur=irgendwann Exitus. Bleibe also unter oder maximal bei 1,6V. Da hast Du mehr von als ein vollbestücktes Board mit alten 3GB Riegeln die bei 1333 Mhz schon heiß werden. Mit Sicherheit wird's hier auch andere Meinungen geben, guck Dir die ruhig alle an und triff dann ne Entscheidung. :)
 
AW: OCZ Ram aufrüsten

Und welche sind sehr gut? also mit guter Spannung, viel Mhz ect.? meine sind ja CL7 also Top oder eher nicht?

EDIT: mein p6t deluxe kann max. 2000er? und der 2400er wird runtergetaktet auf 1800?
 
Zuletzt bearbeitet:
AW: OCZ Ram aufrüsten

Habe mir nun 3 stück (6GB) bei ebay erstanden. was hat es zu bedeutet wenn ich jeweils einen von den neuen einsetze, dass er mir bei allen 8GB anzeigt in Windows wenn ich einen zusätzlich einsetze aber nur bei einem zeigt mir windows 4GB an? der eine ram Defekt?

Wenn ich alle 6 eingebaut habe, zeigt er mir 8GB an. memtest zeigt als Info unten 6 Riegel @2GB aber insgesamt auch nur 8GB.

EDIT: ein Riegel defekt. Das war das Problem!
 
Zuletzt bearbeitet:
Zurück