Seite 3 von 6 123456
  1. #21
    Avatar von blautemple
    Mitglied seit
    11.11.2011
    Liest
    PCGH.de
    Ort
    Würzburg
    Beiträge
    6.609

    AW: I 7 8700k 4.9ghz Pro Edition+MO-RA3 420 PRO+360 Radi über 80Grad in cinebench r 15 normal?

    Zitat Zitat von RtZk Beitrag anzeigen
    Wieso solltest du nicht unter 40° kommen? Bei der Kühlfläche sollte das theoretisch locker drin sein.

    @TE normalerweise kann man sie weiter verwenden, aber ich würde sie einfach weg machen und noch mal schön neu drauf machen.
    Vllt bei 10 bis 15 Grad Wassertemperatur. Aber bei normalen 25 Grad Raumtemperatur wird das Wasser so ca 27 bis 28 Grad haben

    Edit: CPU und GPU Temperatur kannst du sowieso nicht vergleichen. Die GPU hat bei mir laut Sensor gerade einmal ein Delta von ca 5 Grad, während die CPU bei aufwändigen Spielen ein Delta von 20 bis 30 Grad hat
    “Names are for friends, so I don’t need one.”

    PC: Intel Core i7 8700K@5GHz | 32GB Corsair Vengeance LPX@3200MHz | Asus ROG Maximus X Hero | MSI GTX 1080 Aero OC@ACX III@2025MHz/5700MHz
    Konsolen: PS4 Pro

    •   Alt

      Anzeige
      Bitte einloggen, um diese Anzeige auszublenden.
       

  2. #22

    Mitglied seit
    23.11.2017
    Beiträge
    34

    AW: I 7 8700k 4.9ghz Pro Edition+MO-RA3 420 PRO+360 Radi über 80Grad in cinebench r 15 normal?

    so habe die paste neu aufgetragen und jetzt noch mal nen test mit CINEBENCH gemacht also ein core kommt auf 80grad die anderen bleiben unterhalb der 80grad grenze sieht doch gut aus?Habe mal mit 1.36 volt gemacht also von idle modus bleibt er diesmal konstant 4800-4900MHz und nicht wie davor von 4.6-4.9 ghz
    -cputemp.png
    So sah es aus als ich den kühler abgenommen habe. War wohl nicht viel drauf.
    -cpupaste.jpg

    Das einzige was mich gerade stört ist meine hdd, die ist soo laut als wäre nen lüfter bei 80%
    Aber alles andere ist super leise sogar die pumpe ist leiser.

    Sehr komisch habe mir mal in cpu z die core voltage genauer angeschaut, ab und zu springt er auf 1.344 dann wieder auf 1.36 .
    Und während dessen springen alle werte bei den core temp hoch runter von 29 auf 45 mal 29 auf 35 grad.
    Glaube habe was in bios übersehen oder falsch eingestellt.

  3. #23

    Mitglied seit
    22.11.2015
    Beiträge
    830

    AW: I 7 8700k 4.9ghz Pro Edition+MO-RA3 420 PRO+360 Radi über 80Grad in cinebench r 15 normal?

    Ist das Flüssigmetall auf deinem Bild?

    Geh mal ins Bios..unter Tools->OC Profile---speichern auf USB(FAT32) STRG und F2 als TXT datei.
    Das hier mal als Spoiler reinstellen.
    Dann stell ich es eben ein.
    CB sollte deutlich unter 60 Grad laufen.

  4. #24

    Mitglied seit
    23.11.2017
    Beiträge
    34

    AW: I 7 8700k 4.9ghz Pro Edition+MO-RA3 420 PRO+360 Radi über 80Grad in cinebench r 15 normal?

    hier mal die bios einstellungen .

    Spoiler:
    [2018/01/12 17:16:12]
    Ai Overclock Tuner [XMP]
    XMP [XMP DDR4-3200 15-15-15-35-1.35V]
    BCLK Frequency [100.0000]
    ASUS MultiCore Enhancement [Disabled]
    SVID Behavior [Auto]
    AVX Instruction Core Ratio Negative Offset [3]
    CPU Core Ratio [Sync All Cores]
    1-Core Ratio Limit [49]
    2-Core Ratio Limit [49]
    3-Core Ratio Limit [49]
    4-Core Ratio Limit [49]
    5-Core Ratio Limit [49]
    6-Core Ratio Limit [49]
    BCLK Frequency : DRAM Frequency Ratio [Auto]
    DRAM Odd Ratio Mode [Enabled]
    DRAM Frequency [DDR4-3200MHz]
    Xtreme Tweaking [Disabled]
    TPU [Keep Current Settings]
    CPU SVID Support [Disabled]
    CPU Core/Cache Current Limit Max. [255.50]
    Ring Down Bin [Auto]
    Min. CPU Cache Ratio [42]
    Max CPU Cache Ratio [42]
    BCLK Aware Adaptive Voltage [Disabled]
    CPU Core/Cache Voltage [Manual Mode]
    - CPU Core Voltage Override [1.39]
    DRAM Voltage [1.3500]
    CPU VCCIO Voltage [Auto]
    CPU System Agent Voltage [Auto]
    PLL Termination Voltage [Auto]
    PCH Core Voltage [Auto]
    CPU Standby Voltage [Auto]
    DRAM CTRL REF Voltage on CHA [Auto]
    DRAM CTRL REF Voltage on CHB [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank0 BL0 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank0 BL1 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank0 BL2 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank0 BL3 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank0 BL4 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank0 BL5 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank0 BL6 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank0 BL7 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank1 BL0 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank1 BL1 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank1 BL2 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank1 BL3 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank1 BL4 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank1 BL5 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank1 BL6 [Auto]
    DRAM DATA REF Voltage on CHA DIMM0 Rank1 BL7 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank0 BL0 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank0 BL1 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank0 BL2 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank0 BL3 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank0 BL4 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank0 BL5 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank0 BL6 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank0 BL7 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank1 BL0 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank1 BL1 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank1 BL2 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank1 BL3 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank1 BL4 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank1 BL5 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank1 BL6 [Auto]
    DRAM DATA REF Voltage on CHA DIMM1 Rank1 BL7 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank0 BL0 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank0 BL1 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank0 BL2 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank0 BL3 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank0 BL4 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank0 BL5 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank0 BL6 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank0 BL7 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank1 BL0 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank1 BL1 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank1 BL2 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank1 BL3 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank1 BL4 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank1 BL5 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank1 BL6 [Auto]
    DRAM DATA REF Voltage on CHB DIMM0 Rank1 BL7 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank0 BL0 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank0 BL1 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank0 BL2 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank0 BL3 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank0 BL4 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank0 BL5 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank0 BL6 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank0 BL7 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank1 BL0 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank1 BL1 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank1 BL2 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank1 BL3 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank1 BL4 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank1 BL5 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank1 BL6 [Auto]
    DRAM DATA REF Voltage on CHB DIMM1 Rank1 BL7 [Auto]
    Realtime Memory Timing [Disabled]
    FCLK Frequency for Early Power On [Auto]
    Initial BCLK Frequency [Auto]
    BCLK Amplitude [Auto]
    BCLK Slew Rate [Auto]
    BCLK Spread Spectrum [Auto]
    BCLK Frequency Slew Rate [Auto]
    DRAM VTT Voltage [Auto]
    VPPDDR Voltage [Auto]
    DMI Voltage [Auto]
    Core PLL Voltage [Auto]
    Internal PLL Voltage [Auto]
    GT PLL Voltage [Auto]
    Ring PLL Voltage [Auto]
    System Agent PLL Voltage [Auto]
    Memory Controller PLL Voltage [Auto]
    PLL Bandwidth [Auto]
    Eventual DRAM Voltage [Auto]
    Eventual CPU Standby Voltage [Auto]
    Eventual PLL Termination Voltage [Auto]
    Eventual DMI Voltage [Auto]
    Maximus Tweak [Mode 1]
    DRAM CAS# Latency [15]
    DRAM RAS# to CAS# Delay [15]
    DRAM RAS# ACT Time [35]
    DRAM Command Rate [Auto]
    DRAM RAS# to RAS# Delay L [Auto]
    DRAM RAS# to RAS# Delay S [Auto]
    DRAM REF Cycle Time [Auto]
    DRAM Refresh Interval [Auto]
    DRAM WRITE Recovery Time [Auto]
    DRAM READ to PRE Time [Auto]
    DRAM FOUR ACT WIN Time [Auto]
    DRAM WRITE to READ Delay [Auto]
    DRAM WRITE to READ Delay L [Auto]
    DRAM WRITE to READ Delay S [Auto]
    DRAM CKE Minimum Pulse Width [Auto]
    DRAM Write Latency [Auto]
    tRDRD_sg [Auto]
    tRDRD_dg [Auto]
    tRDWR_sg [Auto]
    tRDWR_dg [Auto]
    tWRWR_sg [Auto]
    tWRWR_dg [Auto]
    tWRRD_sg [Auto]
    tWRRD_dg [Auto]
    tRDRD_dr [Auto]
    tRDRD_dd [Auto]
    tRDWR_dr [Auto]
    tRDWR_dd [Auto]
    tWRWR_dr [Auto]
    tWRWR_dd [Auto]
    tWRRD_dr [Auto]
    tWRRD_dd [Auto]
    TWRPRE [Auto]
    TRDPRE [Auto]
    tREFIX9 [Auto]
    OREF_RI [Auto]
    MRC Fast Boot [Auto]
    DRAM CLK Period [Auto]
    Memory Scrambler [Enabled]
    Channel A DIMM Control [Enable both DIMMs]
    Channel B DIMM Control [Enable both DIMMs]
    MCH Full Check [Auto]
    Training Profile [Auto]
    DLLBwEn [Auto]
    DRAM SPD Write [Disabled]
    XTU Setting [Auto]
    DRAM RTL INIT value [Auto]
    DRAM RTL (CHA DIMM0 Rank0) [Auto]
    DRAM RTL (CHA DIMM0 Rank1) [Auto]
    DRAM RTL (CHA DIMM1 Rank0) [Auto]
    DRAM RTL (CHA DIMM1 Rank1) [Auto]
    DRAM RTL (CHB DIMM0 Rank0) [Auto]
    DRAM RTL (CHB DIMM0 Rank1) [Auto]
    DRAM RTL (CHB DIMM1 Rank0) [Auto]
    DRAM RTL (CHB DIMM1 Rank1) [Auto]
    DRAM IOL (CHA DIMM0 Rank0) [Auto]
    DRAM IOL (CHA DIMM0 Rank1) [Auto]
    DRAM IOL (CHA DIMM1 Rank0) [Auto]
    DRAM IOL (CHA DIMM1 Rank1) [Auto]
    DRAM IOL (CHB DIMM0 Rank0) [Auto]
    DRAM IOL (CHB DIMM0 Rank1) [Auto]
    DRAM IOL (CHB DIMM1 Rank0) [Auto]
    DRAM IOL (CHB DIMM1 Rank1) [Auto]
    CHA IO_Latency_offset [Auto]
    CHB IO_Latency_offset [Auto]
    CHA RFR delay [Auto]
    CHB RFR delay [Auto]
    ODT RTT WR (CHA) [Auto]
    ODT RTT PARK (CHA) [Auto]
    ODT RTT NOM (CHA) [Auto]
    ODT RTT WR (CHB) [Auto]
    ODT RTT PARK (CHB) [Auto]
    ODT RTT NOM (CHB) [Auto]
    ODT_READ_DURATION [Auto]
    ODT_READ_DELAY [Auto]
    ODT_WRITE_DURATION [Auto]
    ODT_WRITE_DELAY [Auto]
    Data Rising Slope [Auto]
    Data Rising Slope Offset [Auto]
    Cmd Rising Slope [Auto]
    Cmd Rising Slope Offset [Auto]
    Ctl Rising Slope [Auto]
    Ctl Rising Slope Offset [Auto]
    Clk Rising Slope [Auto]
    Clk Rising Slope Offset [Auto]
    Data Falling Slope [Auto]
    Data Falling Slope Offset [Auto]
    Cmd Falling Slope [Auto]
    Cmd Falling Slope Offset [Auto]
    Ctl Falling Slope [Auto]
    Ctl Falling Slope Offset [Auto]
    Clk Falling Slope [Auto]
    Clk Falling Slope Offset [Auto]
    CPU Load-line Calibration [Level 6]
    CPU Current Capability [140%]
    CPU VRM Switching Frequency [Auto]
    VRM Spread Spectrum [Auto]
    CPU Power Duty Control [T.Probe]
    CPU Power Phase Control [Auto]
    CPU VRM Thermal Control [Auto]
    DRAM Current Capability [100%]
    DRAM Switching Frequency [Auto]
    CPU Core/Cache Boot Voltage [Auto]
    DMI Boot Voltage [Auto]
    Core PLL Boot Voltage [Auto]
    CPU System Agent Boot Voltage [Auto]
    CPU VCCIO Boot Voltage [Auto]
    PLL Termination Boot voltage [Auto]
    CPU Standby Boot Voltage [Auto]
    Intel(R) SpeedStep(tm) [Auto]
    Turbo Mode [Enabled]
    Long Duration Package Power Limit [4095]
    Package Power Time Window [Auto]
    Short Duration Package Power Limit [4095]
    IA AC Load Line [Auto]
    IA DC Load Line [Auto]
    Hyper-Threading [Enabled]
    Thermal Monitor [Enabled]
    Active Processor Cores [All]
    Intel Virtualization Technology [Disabled]
    Hardware Prefetcher [Enabled]
    Adjacent Cache Line Prefetch [Enabled]
    Boot performance mode [Auto]
    SW Guard Extensions (SGX) [Software Controlled]
    Tcc Offset Time Window [Auto]
    Execute Disable Bit [Enabled]
    SMM Code Access Check [Enabled]
    SMM Use Delay Indication [Enabled]
    SMM Use Block Indication [Enabled]
    Intel(R) SpeedStep(tm) [Auto]
    Turbo Mode [Enabled]
    CPU C-states [Auto]
    CFG Lock [Disabled]
    Intel(R) Speed Shift Technology [Enabled]
    Number of P states [0]
    Acoustic Noise Mitigation [Disabled]
    Disable Fast PKG C State Ramp for IA Domain [FALSE]
    Slow Slew Rate for IA Domain [Fast/2]
    Disable Fast PKG C State Ramp for GT Domain [FALSE]
    Slow Slew Rate for GT Domain [Fast/2]
    Disable Fast PKG C State Ramp for SA Domain [FALSE]
    Slow Slew Rate for SA Domain [Fast/2]
    Configurable TDP Boot Mode [Nominal]
    Configurable TDP Lock [Disabled]
    CTDP BIOS control [Disabled]
    Power Limit 1 [0]
    Power Limit 2 [0]
    Power Limit 1 Time Window [0]
    ConfigTDP Turbo Activation Ratio [0]
    Overclocking Lock [Disabled]
    PCI Express Native Power Management [Disabled]
    PCH DMI ASPM [Disabled]
    ASPM [Disabled]
    DMI Link ASPM Control [Disabled]
    PEG - ASPM [Disabled]
    PTID Support [Enabled]
    PECI Access Method [Direct I/O]
    PCI Express Native Power Management [Disabled]
    BDAT ACPI Table Support [Disabled]
    Wake system from S5 [Disabled]
    ACPI Debug [Disabled]
    Low Power S0 Idle Capability [Disabled]
    Lpit Recidency Counter [SLP S0]
    PCI Delay Optimization [Disabled]
    ZpODD Support [Disabled]
    Type C Support [Enabled]
    PEP CPU [Enabled]
    PEP Graphics [Enabled]
    PEP ISP [Disabled]
    PEP SATA Controller [Enabled]
    PEP RAID VOL0 [Disabled]
    PEP SATA PORT0 [Disabled]
    PEP SATA PORT1 [Disabled]
    PEP SATA PORT2 [Disabled]
    PEP SATA PORT3 [Disabled]
    PEP SATA PORT4 [Disabled]
    PEP SATA PORT5 [Disabled]
    PEP SATA NVM1 [Disabled]
    PEP SATA NVM2 [Disabled]
    PEP SATA NVM3 [Disabled]
    PEP UART [Enabled]
    PEP I2C0 [Enabled]
    PEP I2C1 [Enabled]
    PEP I2C2 [Enabled]
    PEP I2C3 [Enabled]
    PEP I2C4 [Enabled]
    PEP I2C5 [Enabled]
    PEP SPI [Enabled]
    PEP XHCI [Enabled]
    PEP Audio [Enabled]
    PEP EMMC [Enabled]
    PEP SDXC [Enabled]
    VT-d [Disabled]
    Primary Display [Auto]
    iGPU Multi-Monitor [Disabled]
    DMI Max Link Speed [Auto]
    PCIEX16/X8_1 Link Speed [Auto]
    PCIEX8_2 Link Speed [Auto]
    PCIe Spread Spectrum Clocking [Auto]
    IOAPIC 24-119 Entries [Enabled]
    PCIe Speed [Auto]
    SATA Controller(s) [Enabled]
    SATA Mode Selection [AHCI]
    S.M.A.R.T. Status Check [Enabled]
    Aggressive LPM Support [Disabled]
    SATA6G_1(Gray) [Enabled]
    Hot Plug [Disabled]
    SATA6G_2(Gray) [Enabled]
    Hot Plug [Disabled]
    SATA6G_3(Gray) [Enabled]
    Hot Plug [Disabled]
    SATA6G_4(Gray) [Enabled]
    Hot Plug [Disabled]
    SATA6G_5(Gray) [Enabled]
    Hot Plug [Disabled]
    SATA6G_6(Gray) [Enabled]
    Hot Plug [Disabled]
    Spin Up Device [Disabled]
    SATA Device Type [Hard Disk Drive]
    Topology [Unknown]
    SATA Port 0 DevSlp [Disabled]
    DITO Configuration [Disabled]
    DITO Value [625]
    DM Value [15]
    Spin Up Device [Disabled]
    SATA Device Type [Hard Disk Drive]
    Topology [Unknown]
    SATA Port 1 DevSlp [Disabled]
    DITO Configuration [Disabled]
    DITO Value [625]
    DM Value [15]
    Spin Up Device [Disabled]
    SATA Device Type [Hard Disk Drive]
    Topology [Unknown]
    SATA Port 2 DevSlp [Disabled]
    DITO Configuration [Disabled]
    DITO Value [625]
    DM Value [15]
    Spin Up Device [Disabled]
    SATA Device Type [Hard Disk Drive]
    Topology [Unknown]
    SATA Port 3 DevSlp [Disabled]
    DITO Configuration [Disabled]
    DITO Value [625]
    DM Value [15]
    Spin Up Device [Disabled]
    SATA Device Type [Hard Disk Drive]
    Topology [Unknown]
    SATA Port 4 DevSlp [Disabled]
    DITO Configuration [Disabled]
    DITO Value [625]
    DM Value [15]
    Spin Up Device [Disabled]
    SATA Device Type [Hard Disk Drive]
    Topology [Unknown]
    SATA Port 5 DevSlp [Disabled]
    DITO Configuration [Disabled]
    DITO Value [625]
    DM Value [15]
    Port 6 [Enabled]
    Hot Plug [Disabled]
    Spin Up Device [Disabled]
    SATA Device Type [Hard Disk Drive]
    Topology [Unknown]
    SATA Port 6 DevSlp [Disabled]
    DITO Configuration [Disabled]
    DITO Value [625]
    DM Value [15]
    Port 7 [Enabled]
    Hot Plug [Disabled]
    Spin Up Device [Disabled]
    SATA Device Type [Hard Disk Drive]
    Topology [Unknown]
    SATA Port 7 DevSlp [Disabled]
    DITO Configuration [Disabled]
    DITO Value [625]
    DM Value [15]
    PCI Express Root Port 1 [Enabled]
    Topology [Unknown]
    ASPM [Disabled]
    L1 Substates [Disabled]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE1 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE1 LTR Lock [Disabled]
    PCIE1 CLKREQ Mapping Override [Default]
    PCI Express Root Port 2 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE2 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE2 LTR Lock [Disabled]
    PCIE2 CLKREQ Mapping Override [Default]
    PCI Express Root Port 3 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE3 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE3 LTR Lock [Disabled]
    PCIE3 CLKREQ Mapping Override [Default]
    PCI Express Root Port 4 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE4 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE4 LTR Lock [Disabled]
    PCIE4 CLKREQ Mapping Override [Default]
    PCI Express Root Port 5 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE5 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE5 LTR Lock [Disabled]
    PCIE5 CLKREQ Mapping Override [Default]
    PCI Express Root Port 6 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE6 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE6 LTR Lock [Disabled]
    PCIE6 CLKREQ Mapping Override [Default]
    PCI Express Root Port 7 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [7]
    Reserved Memory [17]
    Reserved I/O [16]
    PCH PCIE7 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE7 LTR Lock [Disabled]
    PCIE7 CLKREQ Mapping Override [Default]
    PCI Express Root Port 8 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [7]
    Reserved Memory [17]
    Reserved I/O [8]
    PCH PCIE8 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE8 LTR Lock [Disabled]
    PCIE8 CLKREQ Mapping Override [Default]
    PCI Express Root Port 9 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE9 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE9 LTR Lock [Disabled]
    PCIE9 CLKREQ Mapping Override [Default]
    PCI Express Root Port 10 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE10 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE10 LTR Lock [Disabled]
    PCIE10 CLKREQ Mapping Override [Default]
    PCI Express Root Port 11 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE11 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE11 LTR Lock [Disabled]
    PCIE11 CLKREQ Mapping Override [Default]
    PCI Express Root Port 12 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE12 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE12 LTR Lock [Disabled]
    PCIE12 CLKREQ Mapping Override [Default]
    PCI Express Root Port 13 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE13 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE13 LTR Lock [Disabled]
    PCIE13 CLKREQ Mapping Override [Default]
    PCI Express Root Port 14 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE14 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE14 LTR Lock [Disabled]
    PCIE14 CLKREQ Mapping Override [Default]
    PCI Express Root Port 15 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE15 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE15 LTR Lock [Disabled]
    PCIE15 CLKREQ Mapping Override [Default]
    PCI Express Root Port 16 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE16 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE16 LTR Lock [Disabled]
    PCIE16 CLKREQ Mapping Override [Default]
    PCI Express Root Port 17 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE17 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE17 LTR Lock [Disabled]
    PCIE17 CLKREQ Mapping Override [Default]
    PCI Express Root Port 18 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE18 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE18 LTR Lock [Disabled]
    PCIE18 CLKREQ Mapping Override [Default]
    PCI Express Root Port 19 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE19 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE19 LTR Lock [Disabled]
    PCIE19 CLKREQ Mapping Override [Default]
    PCI Express Root Port 20 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE20 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE20 LTR Lock [Disabled]
    PCIE20 CLKREQ Mapping Override [Default]
    PCI Express Root Port 21 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE21 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE21 LTR Lock [Disabled]
    PCIE20 CLKREQ Mapping Override [Default]
    PCI Express Root Port 22 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE22 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE22 LTR Lock [Disabled]
    PCIE20 CLKREQ Mapping Override [Default]
    PCI Express Root Port 23 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE23 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE23 LTR Lock [Disabled]
    PCIE20 CLKREQ Mapping Override [Default]
    PCI Express Root Port 24 [Enabled]
    Topology [Unknown]
    ASPM [Auto]
    L1 Substates [L1.1 & L1.2]
    Gen3 Eq Phase3 Method [Software Search]
    UPTP [5]
    DPTP [7]
    ACS [Enabled]
    URR [Disabled]
    FER [Disabled]
    NFER [Disabled]
    CER [Disabled]
    CTO [Disabled]
    SEFE [Disabled]
    SENFE [Disabled]
    SECE [Disabled]
    PME SCI [Enabled]
    Hot Plug [Disabled]
    Advanced Error Reporting [Enabled]
    PCIe Speed [Auto]
    Transmitter Half Swing [Disabled]
    Detect Timeout [0]
    Extra Bus Reserved [0]
    Reserved Memory [10]
    Reserved I/O [4]
    PCH PCIE24 LTR [Enabled]
    Snoop Latency Override [Auto]
    Non Snoop Latency Override [Auto]
    Force LTR Override [Disabled]
    PCIE24 LTR Lock [Disabled]
    PCIE20 CLKREQ Mapping Override [Default]
    Audio DSP [Disabled]
    HDA-Link Codec Select [Platform Onboard]
    iDisplay Audio Disconnect [Disabled]
    PME Enable [Disabled]
    SerialIO timing parameters [Disabled]
    PTT [Disable]
    PTP aware OS [PTP Aware]
    Me FW Image Re-Flash [Disabled]
    Local FW Update [Enabled]
    HECI Timeouts [Enabled]
    Force ME DID Init Status [Disabled]
    CPU Replaced Polling Disable [Disabled]
    ME DID Message [Enabled]
    HECI Retry Disable [Disabled]
    HECI Message check Disable [Disabled]
    MBP HOB Skip [Disabled]
    HECI2 Interface Communication [Disabled]
    KT Device [Enabled]
    IDER Device [Enabled]
    End Of Post Message [Send in DXE]
    D0I3 Setting for HECI Disable [Disabled]
    Select Camera [Ivcam]
    Delay needed for Ivcam power on [0]
    Delay needed for Ivcam power off [0]
    Rotation [0]
    DFU support [Disabled]
    Wake support [Disabled]
    Core PLL Voltage Offset [0]
    GT PLL Voltage Offset [0]
    Ring PLL Voltage Offset [0]
    System Agent PLL Voltage Offset [0]
    Memory Controller PLL Voltage Offset [0]
    ASF support [Enabled]
    USB Provisioning of AMT [Disabled]
    Activate Remote Assistance Process [Disabled]
    CIRA Timeout [0]
    PET Progress [Enabled]
    WatchDog [Disabled]
    OS Timer [0]
    BIOS Timer [0]
    Secure Erase mode [Simulated]
    Force Secure Erase [Disabled]
    MEBx hotkey Pressed [Disabled]
    MEBx Selection Screen [Disabled]
    Hide Unconfigure ME Confirmation Prompt [Disabled]
    MEBx OEM Debug Menu Enable [Disabled]
    Unconfigure ME [Disabled]
    Non-UI Mode Resolution [Auto]
    UI Mode Resolution [Auto]
    Graphics Mode Resolution [Auto]
    Security Device Support [Enable]
    Security Device Support [Enable]
    SHA-1 PCR Bank [Enabled]
    SHA256 PCR Bank [Enabled]
    SHA384 PCR Bank [Disabled]
    SHA512 PCR Bank [Disabled]
    SM3_256 PCR Bank [Disabled]
    Pending operation [None]
    Platform Hierarchy [Enabled]
    Storage Hierarchy [Enabled]
    Endorsement Hierarchy [Enabled]
    TPM2.0 UEFI Spec Version [TCG_2]
    Physical Presence Spec Version [1.3]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Detect Non-Compliance Device [Disabled]
    Prefetchable Memory [10]
    Reserved Memory Alignment [1]
    Prefetchable Memory Alignment [1]
    Onboard LED [Enabled]
    Q-Code LED Function [POST Code Only]
    ErP Ready [Disabled]
    Restore AC Power Loss [Power Off]
    Power On By PCI-E/PCI [Disabled]
    Power On By RTC [Disabled]
    HD Audio Controller [Enabled]
    PCIEX4_3 Bandwidth [Auto Mode]
    M.2_1 Configuration: [Auto][SATA mode][PCIE mode] [Auto]
    M.2_2 PCIe Bandwidth Configuration: [X2][X4] [X2]
    Hyper M.2 X16: [Disable][Enable] [Disabled]
    Asmedia Back USB 3.1 Gen2 Controller [Enabled]
    Asmedia Front USB 3.1 Gen2 Controller [Enabled]
    USB Type C Power Switch [Auto]
    When system is in working state [On]
    When system is in sleep, hibernate or soft off states [On]
    When system is in working state [On]
    When system is in sleep, hibernate or soft off states [On]
    Bluetooth Controller [Enabled]
    Wi-Fi Controller [Enabled]
    Intel LAN Controller [Enabled]
    Intel LAN PXE Option ROM [Disabled]
    Detect Non-Compliance Device [Disabled]
    Primary PEG [Auto]
    Primary PCIE [Auto]
    Network Stack [Disabled]
    Legacy USB Support [Enabled]
    USB Keyboard and Mouse Simulator [Disabled]
    [Auto]
    U31G2_EC1 [Enabled]
    U31G2_E2 [Enabled]
    U31G1_1 [Enabled]
    U31G1_2 [Enabled]
    U31G1_3 [Enabled]
    U31G1_4 [Enabled]
    U31G1_5 [Enabled]
    U31G1_6 [Enabled]
    USB_7 [Enabled]
    USB_8 [Enabled]
    USB_9 [Enabled]
    USB_10 [Enabled]
    USB_13 [Enabled]
    USB_14 [Enabled]
    CPU Temperature [Monitor]
    MotherBoard Temperature [Monitor]
    PCH Temperature [Monitor]
    T_Sensor1 Temperature [Monitor]
    EXT_Sensor1 Temperature [Monitor]
    EXT_Sensor2 Temperature [Monitor]
    EXT_Sensor3 Temperature [Monitor]
    Water In T Sensor [Ignore]
    Water Out T Sensor [Ignore]
    CPU Fan Speed [Ignore]
    Chassis Fan 1 Speed [Monitor]
    Chassis Fan 2 Speed [Monitor]
    Chassis Fan 3 Speed [Monitor]
    AIO PUMP Speed [Monitor]
    HAMP Fan Speed [Monitor]
    CPU Optional Fan Speed [Monitor]
    W_PUMP+ Speed [Monitor]
    Extension Fan 1 Speed [Monitor]
    Extension Fan 2 Speed [Monitor]
    Extension Fan 3 Speed [Monitor]
    Flow Rate [Monitor]
    CPU Core Voltage [Monitor]
    3.3V Voltage [Monitor]
    5V Voltage [Monitor]
    12V Voltage [Monitor]
    CPU Q-Fan Control [Auto]
    CPU Fan Step Up [0 sec]
    CPU Fan Step Down [0 sec]
    CPU Fan Speed Lower Limit [200 RPM]
    CPU Fan Profile [Standard]
    AIO_PUMP/W_PUMP+ Control [Disabled]
    Chassis Fan 1 Q-Fan Control [Auto]
    Chassis Fan 1 Q-Fan Source [CPU]
    Chassis Fan 1 Step Up [0 sec]
    Chassis Fan 1 Step Down [0 sec]
    Chassis Fan 1 Speed Low Limit [200 RPM]
    Chassis Fan 1 Profile [Standard]
    Chassis Fan 2 Q-Fan Control [Auto]
    Chassis Fan 2 Q-Fan Source [CPU]
    Chassis Fan 2 Step Up [0 sec]
    Chassis Fan 2 Step Down [0 sec]
    Chassis Fan 2 Speed Low Limit [200 RPM]
    Chassis Fan 2 Profile [Standard]
    Chassis Fan 3 Q-Fan Control [Auto]
    Chassis Fan 3 Q-Fan Source [CPU]
    Chassis Fan 3 Step Up [0 sec]
    Chassis Fan 3 Step Down [0 sec]
    Chassis Fan 3 Speed Low Limit [200 RPM]
    Chassis Fan 3 Profile [Standard]
    HAMP Fan Control [Auto]
    HAMP Fan Source [CPU]
    HAMP Fan Step Up [0 sec]
    HAMP Fan Step Down [0 sec]
    HAMP Fan Speed Low Limit [200 RPM]
    HAMP Fan Profile [Standard]
    Extension Fan 1 Q-Fan Control [DC Mode]
    Extension Fan 1 Q-Fan Source [CPU]
    Extension Fan 1 Speed Low Limit [200 RPM]
    Extension Fan 1 Profile [Standard]
    Extension Fan 2 Q-Fan Control [DC Mode]
    Extension Fan 2 Q-Fan Source [CPU]
    Extension Fan 2 Speed Low Limit [200 RPM]
    Extension Fan 2 Profile [Standard]
    Extension Fan 3 Q-Fan Control [DC Mode]
    Extension Fan 3 Q-Fan Source [CPU]
    Extension Fan 3 Speed Low Limit [200 RPM]
    Extension Fan 3 Profile [Standard]
    Fast Boot [Enabled]
    Next Boot after AC Power Loss [Normal Boot]
    Above 4G Decoding [Disabled]
    Boot Logo Display [Auto]
    POST Delay Time [3 sec]
    Boot up NumLock State [Enabled]
    Wait For 'F1' If Error [Enabled]
    Option ROM Messages [Enabled]
    Interrupt 19 Capture [Enabled]
    Setup Mode [Advanced Mode]
    Launch CSM [Enabled]
    Boot Device Control [UEFI and Legacy OPROM]
    Boot from Network Devices [Legacy only]
    Boot from Storage Devices [Legacy only]
    Boot from PCI-E/PCI Expansion Devices [Legacy only]
    OS Type [Other OS]
    Setup Animator [Disabled]
    Load from Profile [1]
    Profile Name [4900m]
    Save to Profile [1]
    Bus Interface [PCIEX16/X8_1]

  5. #25
    Avatar von butzbert
    Mitglied seit
    04.08.2017
    Beiträge
    452

    AW: I 7 8700k 4.9ghz Pro Edition+MO-RA3 420 PRO+360 Radi über 80Grad in cinebench r 15 normal?

    -Dein Cache läuft nur auf einer Ratio von 42.Normal sind 44er Ratio oder mach einfach Auto

    -Deine AVX Instruction Core Ratio Negative Offset: kannst auf 2X stellen. Jeder 8700K muss locker bei einer AVX Anwendung gute Temps bei 4,7GHZ behalten.

    -CPU Power Duty Control [T.Probe] : Versuch mal Extrem und Teste das. Geben die Spannungswandler mehr Strom. Meine CPU läuft dann mit besseren Temps und stabiler.

    Bisschen eigenartig ist wirklich das ein Core von Temps so aus der Reihe tanzt. Aber wirklich Sorgen würde ich mir da nicht machen. Die CPU ist halt echt ein Hitzkopf!
    Asus Maximus Hero X Z370 - Intel I7-8700K - MSI GTX 1080 Gaming X - G-Skill Trident Z 3600 - Samsung 960 EVO M.2 - Custom WaKü

  6. #26

    Mitglied seit
    22.11.2015
    Beiträge
    830

    AW: I 7 8700k 4.9ghz Pro Edition+MO-RA3 420 PRO+360 Radi über 80Grad in cinebench r 15 normal?

    Zum Testen:
    HWiNFO - Download
    start Sensors only
    Vcore/ SA / IMC IO steht ca. in der Mitte

    1. CB run

    Dann prime95 29.4b7 AVX
    GIMPS - Free Prime95 software downloads - PrimeNet

    prime in einen Ordner entpacken
    einmal starten und wieder schließen
    im Ordner in die Datei local.txt, folgendes hineinkopieren:
    CpuSupportsFMA3=0
    Local schreibgeschützt setzen.

    prime neben HWinfo Starten:
    2. custom
    Min. FFT 1344 ...Max FFT1344
    run FFT in-place
    ok

    steigen Worker aus (siehst du in HWinfo wenn keine 100% mehr anliegen/BS mehr Vcore evtl SA , IO wieder rauf....
    auch unter HWinfo ganzunten auf WHEA errors achten,
    .ca. 5 bis 10 minuten laufen lassen, ist nur zum Antesten.

    3. Test Temps / Max Last
    Small FFTs

    4. Test 24/7
    Custom 8 bis 4096 in place.


    Spoiler:

    Ai Overclock Tuner [XMP]
    XMP [XMP DDR4-3200 15-15-15-35-1.35V]
    BCLK Frequency [100.0000]
    ASUS MultiCore Enhancement [Disabled]

    SVID Behavior [Auto]-------------------------------------------> (Best case) evtl.

    AVX Instruction Core Ratio Negative Offset [3]---->0

    CPU Core Ratio [Sync All Cores]
    1-Core Ratio Limit [49]
    2-Core Ratio Limit [49]
    3-Core Ratio Limit [49]
    4-Core Ratio Limit [49]
    5-Core Ratio Limit [49]
    6-Core Ratio Limit [49]

    DRAM Frequency [DDR4-3200MHz]

    CPU SVID Support [Disabled]
    CPU Core/Cache Current Limit Max. [255.50]

    Min. CPU Cache Ratio [42]---> 8
    Max CPU Cache Ratio [42]--->44 evtl 46 für 4,9 GHz

    BCLK Aware Adaptive Voltage [Disabled]
    CPU Core/Cache Voltage [Manual Mode]
    - CPU Core Voltage Override [1.39]-------->start ab 1,35 ->1,33->1,31

    DRAM Voltage [1.3500]---> evtl. 1.36
    CPU VCCIO Voltage [Auto]------------- ---->starten 1.10000 , dann runter, in HWinfo bitte schaun was angelegt wird
    CPU System Agent Voltage [Auto]- - --->starten 1.10000 , dann runter, in HWinfo bitte schaun was angelegt wird


    MRC Fast Boot [Auto]------------------>[Disable] unter Ramsettings ca. in der Mitte

    CPU Load-line Calibration [Level 6]--->Level 4 (ca 0,04-0,06 Vdroop) /Level 3 ca 0,08 Vdroop

    CPU Current Capability [140%]
    CPU VRM Switching Frequency [Auto]
    VRM Spread Spectrum [Auto]
    CPU Power Duty Control [T.Probe]
    CPU Power Phase Control [Auto]
    CPU VRM Thermal Control [Auto]
    DRAM Current Capability [100%]-> [130%]
    DRAM Switching Frequency [Auto]

    Long Duration Package Power Limit [4095]
    Package Power Time Window [Auto------------]->127
    Short Duration Package Power Limit [4095]
    IA AC Load Line [Auto]-------------------------------->0.01
    IA DC Load Line [Auto]------------------------------->0.01

  7. #27
    Avatar von RtZk
    Mitglied seit
    20.11.2016
    Liest
    PCGH.de & Heft (Abo)
    Beiträge
    5.111

    AW: I 7 8700k 4.9ghz Pro Edition+MO-RA3 420 PRO+360 Radi über 80Grad in cinebench r 15 normal?

    Zitat Zitat von blautemple Beitrag anzeigen
    Vllt bei 10 bis 15 Grad Wassertemperatur. Aber bei normalen 25 Grad Raumtemperatur wird das Wasser so ca 27 bis 28 Grad haben

    Edit: CPU und GPU Temperatur kannst du sowieso nicht vergleichen. Die GPU hat bei mir laut Sensor gerade einmal ein Delta von ca 5 Grad, während die CPU bei aufwändigen Spielen ein Delta von 20 bis 30 Grad hat
    Ist deine CPU denn geköpft? Weil eigentlich sollte die Wärmeübertragung dann reibungslos möglich sein, naja, wenn die Hitze nicht schnell genug weg transportiert wird, dann wäre ja eine zu langsam laufende Pumpe das Problem.
    Naja wie auch immer, selbst ein Delta von 30 Grad könnte diese Temps nicht erklären.
    System: i7-6700k@4,7GHz | ASUS ROG Maximus VIII Hero Alpha | 16GB G.Skill RipJaws DDR4-3200mhz | EKL Alpenföhn Olymp | GeForce GTX 1080 Ti @Morpheus 2 | Crucial MX300 750gb Limited Edition | Samsung 860 EVO 1TB | Superflower Platinum King 550 Watt | Fractal Design Meshify C Dark, Glasfenster
    Laptop: Lenovo ThinkPad X280 i7-8550U 16GB DDR4-2400mhz 512GB M2 PCI-E

  8. #28
    Avatar von DaveManCB
    Mitglied seit
    08.03.2009
    Liest
    PCGH.de
    Beiträge
    400

    AW: I 7 8700k 4.9ghz Pro Edition+MO-RA3 420 PRO+360 Radi über 80Grad in cinebench r 15 normal?

    Sah auf dem Bild auch so aus als wäre der Kühler schräg drauf gewesen.

    6700k geköpft@4,6GHz \ Ringbus @4.5GHz \ Noctua NH-D15 \ Maximus VIII Hero \ 16GB Corsair LPX@3200MHz \ 980Ti Zotec Amp Extreme@1506MHz \ 700 Watt Antec VP Series \ Corsair 750D \ Samsung EVO 960 250GB(Windows) \ Corsair Force3 180Gb(Games) \ WD Black 4TB(Games) \ SAMSUNG 1TB(Games-Backup) \ Seagate ST320LM001 HN-M320MBB 320GB(Musik-Bilder) \ LG Electronics BH16NS40 Blu-ray \ Asus VG Serie VG248QE \ Windows 10 Pro 64Bit

  9. #29

    Mitglied seit
    23.11.2017
    Beiträge
    34

    AW: I 7 8700k 4.9ghz Pro Edition+MO-RA3 420 PRO+360 Radi über 80Grad in cinebench r 15 normal?

    so hier nen bild von prime bekomme heftige temp .
    -cputemphoch.png
    So um die max 90 grad auf 1core und andere über 80grad das ist echt nicht normal oder?
    Aber es ist sehr komisch das es ab und zu auf 60-90 grad schwingt das bei 100% , könnte es sein das meine pumpe einfach zu schwach ist bei max pumpen einstellungen?Bei ca 6m schlauch länge?`
    EK-Tube ZMT Schlauch 3m und EK-DuraClear 3m. + 2*Alphacool Eiszapfen HF Schnellverschlusskupplungsset

    •   Alt

      Anzeige
      Bitte einloggen, um diese Anzeige auszublenden.
       

  10. #30
    Avatar von DjTomCat
    Mitglied seit
    27.09.2008
    Liest
    PCGH.de & Heft
    Ort
    Mönchengladbach
    Beiträge
    775

    AW: I 7 8700k 4.9ghz Pro Edition+MO-RA3 420 PRO+360 Radi über 80Grad in cinebench r 15 normal?

    Die Pumpe schaft das.

    Du scheinst ne schlecht CPU erwischt zu haben.
    I7 7700K @4,6GHz 1,19V Delid|MSI Z270 Gaming Pro Carbon|Corsair Vengance Red 32GB 3000MHz CL15|Titan X (Pascal)|Corsair HX850i|960 EVO M.2 250GB|MX300 1TB|850 EVO 1TB|2TB WD Black|2TB WD|Thermaltake The Tower 900|Cuplex Kryos Next|kryographics Titan X|Aquastream XT Ultra|Aquaero 6 Pro|farbwerk|Alphacool NexXxoS XT45 420|Phobya G-Changer 560 V.2|Ac Filter|Ac Durchflusssensor "high flow"|Asus PG27AQ|Samsung U28E590|12x NB-eLoop B14-PS


Seite 3 von 6 123456

Ähnliche Themen

  1. i7 8700k - Dark Rock Pro 2 vs Silent Loop 280mm
    Von 16Marco16 im Forum Prozessoren
    Antworten: 6
    Letzter Beitrag: 23.12.2017, 16:03
  2. Microsoft Surface Pro 3 Verkaufsaktion: Über 100 Euro Rabatt vor Surface-4-Start
    Von PCGH-Redaktion im Forum Tablet-PC, Handy, Smartphone, PDA und Navigation
    Antworten: 16
    Letzter Beitrag: 22.02.2015, 11:28
  3. Windows 7 Pro 64 bit über eBay für 40 Euro neu, Erfahrungen? Seriös?
    Von yupes im Forum Windows 7, 8(.1) und 10, Windows allgemein
    Antworten: 14
    Letzter Beitrag: 02.01.2014, 21:00
  4. Antworten: 51
    Letzter Beitrag: 27.02.2010, 21:25
  5. Unterschied Airplex Pro 360 Magiccol Slim Triple 360
    Von Freestyler808 im Forum Erweiterbare Wasserkühlungen
    Antworten: 16
    Letzter Beitrag: 05.05.2009, 16:47

Stichworte

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •