[...]Ich habe das How to OC zehn mal gelesen, und 10 mal angewand, aber es geht einfach nicht weiter, er Freezed nach 2-3 Min Prime 95
FSB spannung höher kein Problem, aber wieweit kann ich erhöhen ? ich trau mich nicht so viel, ich habe schon mal 0,1V gemacht, aber ohne verbesserung....
WAS kann ich machen, oder lieber andere CPU ???????
Bitte hilfe !!!
Jaja, so allgemein gehaltene HowTo's liebe ich auch. Von nix echt ne Ahnung, aber anderen damit Hoffnung machen.
*Hust*
Kannst du mal vom MIT-Screen ein Pic machen und hier reinstellen?
Welchen RAM-Multi hast du eingestellt?
Ich würde z.B. in deinem Fall so probieren einzustellen:
Keine Angst - kann nix passieren. Fang ganz unten mit FSB 400 an.
Druck dir die Tabellen am besten aus.
Falls nach diesen Einstellungen nix geht, ist entweder der Ram schei0e oder deine CPU
---------------------------------------------
FSB 500
Robust Graphics Booster [Auto]
CPU Clock Ratio [7 X]
Fine CPU Clock Ratio [+0.5]
CPU Frequency 3.75GHz(500x7,5)
CPU Host Clock Control [Enabled]
CPU Host Frequency(Mhz) [500]
PCI Express Frequency(Mhz) [Auto]
C.I.A.2 [Disabled]
!! Performance Enhanced With... [Turbo]
System Memory Multiplier [2.00B]
Memory Frequency(Mhz) 1000
DRAM Timing Selectable [Manual]
****** Standard Timing Control *******
CAS Latency Time [5]
DRAM RAS# to CAS# Delay [5]
DRAM RAS# Precharge [5]
Precharge delay (tRAS) [18]
****** Advanced Timing Control *******
ACT to ACT Delay [3]
Rank Write To READ Delay [3]
Write To Precharge Delay [6]
Refresh to ACT Delay [52]
Read to Precharge Delay [3]
Static tRead Value [9]
Static tRead Phase Adjust [Auto]
Command Rate(CMD) [Auto]
***** Clock Driving & Skew Control *****
CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [Normal]
(G)MCH Clock Skew Control [Normal]
**** System Voltage NOT Optimized !! ****
System Voltage Control [Manual]
DDR2 OverVoltage Control [+0.100V]
PCI-E OverVoltage Control [Normal]
FSB Voltage OverControl [+0.20V]
(G)MCH OverVoltage Control [Normal]
MCH Reference Voltage Control [Normal]
DDR Reference Voltage Control [Normal]
DDR Termination Voltage Control [Normal]
CPU GTLREF1 Voltage Ratio [Auto]
CPU GTLREF2 Voltage Ratio [Normal]
Loadline Calibration [Auto]
CPU Voltage Control [1.42500V]
Normal CPU Vcore 1.22500V
---------------------------------------------
FSB 450
Robust Graphics Booster [Auto]
CPU Clock Ratio [7 X]
Fine CPU Clock Ratio [+0.5]
CPU Frequency 3.375GHz(450x7,5)
CPU Host Clock Control [Enabled]
CPU Host Frequency(Mhz) [450]
PCI Express Frequency(Mhz) [Auto]
C.I.A.2 [Disabled]
!! Performance Enhanced With... [Turbo]
System Memory Multiplier [2.00B]
Memory Frequency(Mhz) 900
DRAM Timing Selectable [Manual]
****** Standard Timing Control *******
CAS Latency Time [5]
DRAM RAS# to CAS# Delay [5]
DRAM RAS# Precharge [5]
Precharge delay (tRAS) [18]
****** Advanced Timing Control *******
ACT to ACT Delay [3]
Rank Write To READ Delay [3]
Write To Precharge Delay [6]
Refresh to ACT Delay [52]
Read to Precharge Delay [3]
Static tRead Value [9]
Static tRead Phase Adjust [Auto]
Command Rate(CMD) [Auto]
***** Clock Driving & Skew Control *****
CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [Normal]
(G)MCH Clock Skew Control [Normal]
**** System Voltage NOT Optimized !! ****
System Voltage Control [Manual]
DDR2 OverVoltage Control [+0.100V]
PCI-E OverVoltage Control [Normal]
FSB Voltage OverControl [Normal]
(G)MCH OverVoltage Control [Normal]
MCH Reference Voltage Control [Normal]
DDR Reference Voltage Control [Normal]
DDR Termination Voltage Control [Normal]
CPU GTLREF1 Voltage Ratio [Auto]
CPU GTLREF2 Voltage Ratio [Normal]
Loadline Calibration [Auto]
CPU Voltage Control [1.37500V]
Normal CPU Vcore 1.22500V
---------------------------------------------
FSB 400
Robust Graphics Booster [Auto]
CPU Clock Ratio [7 X]
Fine CPU Clock Ratio [+0.5]
CPU Frequency 3.00GHz(400x7,5)
CPU Host Clock Control [Enabled]
CPU Host Frequency(Mhz) [400]
PCI Express Frequency(Mhz) [Auto]
C.I.A.2 [Disabled]
!! Performance Enhanced With... [Turbo]
System Memory Multiplier [2.40B]
Memory Frequency(Mhz) 960
DRAM Timing Selectable [Manual]
****** Standard Timing Control *******
CAS Latency Time [5]
DRAM RAS# to CAS# Delay [5]
DRAM RAS# Precharge [5]
Precharge delay (tRAS) [18]
****** Advanced Timing Control *******
ACT to ACT Delay [3]
Rank Write To READ Delay [3]
Write To Precharge Delay [6]
Refresh to ACT Delay [52]
Read to Precharge Delay [3]
Static tRead Value [7]
Static tRead Phase Adjust [Auto]
Command Rate(CMD) [Auto]
***** Clock Driving & Skew Control *****
CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [Normal]
(G)MCH Clock Skew Control [Normal]
**** System Voltage NOT Optimized !! ****
System Voltage Control [Manual]
DDR2 OverVoltage Control [+0.100V]
PCI-E OverVoltage Control [Normal]
FSB Voltage OverControl [Normal]
(G)MCH OverVoltage Control [Normal]
MCH Reference Voltage Control [Normal]
DDR Reference Voltage Control [Normal]
DDR Termination Voltage Control [Normal]
CPU GTLREF1 Voltage Ratio [Auto]
CPU GTLREF2 Voltage Ratio [Normal]
Loadline Calibration [Auto]
CPU Voltage Control [1,32500V]
Normal CPU Vcore 1.22500V
---------------------------------------------
Weiterhin ist wichtig:
Legal USB [Disabled]
Graka an den unteren Anschluss